Grade 8 Math: Common Core Standards
Your Teacher Information Pack for Grade 8 Math: every Common Core standard with its official code, notes on which states use them, and trusted links. Tick what you're teaching and send it straight into the lesson plan maker.
- Country
- United States
- Grade
- Grade 8
- Ages
- about 13–14 (varies by state)
- Status
- Not federal law: adopted state by state
- Source
- Common Core State Standards – 2010
- Last checked
- 2026-10-20
Does my state use these standards?
Your state may use its own standards. Common Core is not federal law: each state decides. For math (compiled 2026-10-20, check your state's site before relying on it):
- Use their own standards, not Common Core (14): Alabama, Alaska, Florida, Georgia, Indiana, Kentucky, Minnesota, Missouri, Nebraska, Oklahoma, South Carolina, Tennessee, Texas, Virginia. Codes on this page won't match your state's paperwork.
- Adapted and renamed (24): Arizona, Arkansas, Colorado, Idaho, Kansas, Louisiana, Maine, Maryland, Massachusetts, Mississippi, Montana, New Hampshire, New Jersey, New York, North Carolina, North Dakota, Ohio, Oregon, Pennsylvania, South Dakota, Utah, West Virginia, Wisconsin, Wyoming. Mostly similar, but check wording and codes.
- Common Core as written (13): California, Connecticut, Delaware, District of Columbia, Hawaii, Illinois, Iowa, Michigan, Nevada, New Mexico, Rhode Island, Vermont, Washington.
The standards
Standards are grouped into domains (big areas such as Operations & Algebraic Thinking) and clusters (the bold lines). Each code links to the official page. ★ marks a modeling standard and (+) additional mathematics for advanced courses.
The Number System (NS) 2 standards
- Know that there are numbers that are not rational, and approximate them by rational numbers.
- 8.NS.A.1 Know that numbers that are not rational are called irrational. Understand informally that every number has a decimal expansion; for rational numbers show that the decimal expansion repeats eventually, and convert a decimal expansion which repeats eventually into a rational number.
- 8.NS.A.2 Use rational approximations of irrational numbers to compare the size of irrational numbers, locate them approximately on a number line diagram, and estimate the value of expressions (e.g., π2). For example, by truncating the decimal expansion of √2, show that √2 is between 1 and 2, then between 1.4 and 1.5, and explain how to continue on to get better approximations.
Expressions & Equations (EE) 8 standards
- Expressions and Equations Work with radicals and integer exponents.
- 8.EE.A.1 Know and apply the properties of integer exponents to generate equivalent numerical expressions. For example, 32 × 3-5 = 3-3 = 1/33 = 1/27.
- 8.EE.A.2 Use square root and cube root symbols to represent solutions to equations of the form x2 = p and x3 = p, where p is a positive rational number. Evaluate square roots of small perfect squares and cube roots of small perfect cubes. Know that √2 is irrational.
- 8.EE.A.3 Use numbers expressed in the form of a single digit times an integer power of 10 to estimate very large or very small quantities, and to express how many times as much one is than the other. For example, estimate the population of the United States as 3 times 108 and the population of the world as 7 times 109, and determine that the world population is more than 20 times larger.
- 8.EE.A.4 Perform operations with numbers expressed in scientific notation, including problems where both decimal and scientific notation are used. Use scientific notation and choose units of appropriate size for measurements of very large or very small quantities (e.g., use millimeters per year for seafloor spreading). Interpret scientific notation that has been generated by technology
- Understand the connections between proportional relationships, lines, and linear equations.
- 8.EE.B.5 Graph proportional relationships, interpreting the unit rate as the slope of the graph. Compare two different proportional relationships represented in different ways. For example, compare a distance-time graph to a distance-time equation to determine which of two moving objects has greater speed.
- 8.EE.B.6 Use similar triangles to explain why the slope m is the same between any two distinct points on a non-vertical line in the coordinate plane; derive the equation y = mx for a line through the origin and the equation y = mx + b for a line intercepting the vertical axis at b.
- Analyze and solve linear equations and pairs of simultaneous linear equations.
- 8.EE.C.7 Solve linear equations in one variable.
- 8.EE.C.7.a Give examples of linear equations in one variable with one solution, infinitely many solutions, or no solutions. Show which of these possibilities is the case by successively transforming the given equation into simpler forms, until an equivalent equation of the form x = a, a = a, or a = b results (where a and b are different numbers).
- 8.EE.C.7.b Solve linear equations with rational number coefficients, including equations whose solutions require expanding expressions using the distributive property and collecting like terms.
- 8.EE.C.8 Analyze and solve pairs of simultaneous linear equations.
- 8.EE.C.8.a Understand that solutions to a system of two linear equations in two variables correspond to points of intersection of their graphs, because points of intersection satisfy both equations simultaneously.
- 8.EE.C.8.b Solve systems of two linear equations in two variables algebraically, and estimate solutions by graphing the equations. Solve simple cases by inspection. For example, 3x + 2y = 5 and 3x + 2y = 6 have no solution because 3x + 2y cannot simultaneously be 5 and 6.
- 8.EE.C.8.c Solve real-world and mathematical problems leading to two linear equations in two variables. For example, given coordinates for two pairs of points, determine whether the line through the first pair of points intersects the line through the second pair.
- 8.EE.C.7 Solve linear equations in one variable.
Functions (F) 5 standards
- Define, evaluate, and compare functions.
- 8.F.A.1 Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output.1Note: Function notation is not required for Grade 8.
- 8.F.A.2 Compare properties of two functions each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). For example, given a linear function represented by a table of values and a linear function represented by an algebraic expression, determine which function has the greater rate of change.
- 8.F.A.3 Interpret the equation y = mx + b as defining a linear function, whose graph is a straight line; give examples of functions that are not linear. For example, the function A = s2 giving the area of a square as a function of its side length is not linear because its graph contains the points (1,1), (2,4) and (3,9), which are not on a straight line.
- Use functions to model relationships between quantities.
- 8.F.B.4 Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x, y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of a linear function in terms of the situation it models, and in terms of its graph or a table of values.
- 8.F.B.5 Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally.
Geometry (G) 9 standards
- Understand congruence and similarity using physical models, transparencies, or geometry software.
- 8.G.A.1 Verify experimentally the properties of rotations, reflections, and translations:
- 8.G.A.2 Understand that a two-dimensional figure is congruent to another if the second can be obtained from the first by a sequence of rotations, reflections, and translations; given two congruent figures, describe a sequence that exhibits the congruence between them.
- 8.G.A.3 Describe the effect of dilations, translations, rotations, and reflections on two-dimensional figures using coordinates.
- 8.G.A.4 Understand that a two-dimensional figure is similar to another if the second can be obtained from the first by a sequence of rotations, reflections, translations, and dilations; given two similar two-dimensional figures, describe a sequence that exhibits the similarity between them.
- 8.G.A.5 Use informal arguments to establish facts about the angle sum and exterior angle of triangles, about the angles created when parallel lines are cut by a transversal, and the angle-angle criterion for similarity of triangles. For example, arrange three copies of the same triangle so that the sum of the three angles appears to form a line, and give an argument in terms of transversals why this is so.
- Understand and apply the Pythagorean Theorem.
- 8.G.B.6 Explain a proof of the Pythagorean Theorem and its converse.
- 8.G.B.7 Apply the Pythagorean Theorem to determine unknown side lengths in right triangles in real-world and mathematical problems in two and three dimensions.
- 8.G.B.8 Apply the Pythagorean Theorem to find the distance between two points in a coordinate system.
- Solve real-world and mathematical problems involving volume of cylinders, cones, and spheres.
- 8.G.C.9 Know the formulas for the volumes of cones, cylinders, and spheres and use them to solve real-world and mathematical problems.
Statistics & Probability (SP) 4 standards
- Investigate patterns of association in bivariate data.
- 8.SP.A.1 Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association, and nonlinear association.
- 8.SP.A.2 Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line, and informally assess the model fit by judging the closeness of the data points to the line.
- 8.SP.A.3 Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. For example, in a linear model for a biology experiment, interpret a slope of 1.5 cm/hr as meaning that an additional hour of sunlight each day is associated with an additional 1.5 cm in mature plant height.
- 8.SP.A.4 Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a two-way table. Construct and interpret a two-way table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. For example, collect data from students in your class on whether or not they have a curfew on school nights and whether or not they have assigned chores at home. Is there evidence that those who have a curfew also tend to have chores?
Standards for Mathematical Practice apply to every grade and course
- MP1 Make sense of problems and persevere in solving them.
- MP2 Reason abstractly and quantitatively.
- MP3 Construct viable arguments and critique the reasoning of others.
- MP4 Model with mathematics.
- MP5 Use appropriate tools strategically.
- MP6 Attend to precision.
- MP7 Look for and make use of structure.
- MP8 Look for and express regularity in repeated reasoning.
Tests and key dates
Each state sets its own tests and testing windows. Check your state education department (links on our state list) and your district calendar.
Official documents
Trusted free resources
- Khan Academy – Free practice, videos and teacher tools (US grades and courses).
Links only: we don't copy their content and we aren't connected to these organisations.
More packs
Related: High School Number and Quantity, High School Algebra, High School Functions, High School Geometry, High School Statistics and Probability, Algebra I, Geometry, Algebra II.
© Copyright 2010. National Governors Association Center for Best Practices and Council of Chief State School Officers. All rights reserved.
The Common Core State Standards are owned and developed by the National Governors Association Center for Best Practices (NGA Center) and the Council of Chief State School Officers (CCSSO), and are shown here under the Common Core State Standards Public License. Examples from the official site are not included. Classfern is not affiliated with or endorsed by NGA Center or CCSSO. Each standard links to its official page.
Frequently asked questions
Do all states use the Common Core math standards?
No. In our 2026-10-20 review of the 50 states and DC, 13 use the Common Core math standards as written, 24 use an adapted version under their own name, and 14 use their own standards. Check your state's education website.
What does a code like 3.OA.A.1 mean?
It is the official Common Core identifier: grade (3), domain (OA = Operations and Algebraic Thinking), cluster (A) and standard number (1). The full form is CCSS.Math.Content.3.OA.A.1.