Geometry: Common Core Standards
Your Teacher Information Pack for Geometry: every Common Core standard with its official code, notes on which states use them, and trusted links. Tick what you're teaching and send it straight into the lesson plan maker.
- Country
- United States
- Level
- High school course
- Status
- Not federal law: adopted state by state
- Source
- Common Core State Standards – 2010
- Last checked
- 2026-10-20
Mapped from the official CCSS Mathematics Appendix A "Designing High School Mathematics Courses Based on the Common Core State Standards" (Traditional Pathway, PDF pages 27–35). Appendix A is a model, not a requirement; states and districts may group standards differently. Its instructional notes often limit a standard to certain function types in a given course, so the same standard can appear in more than one course. Sub-standard scope notes (e.g. "F.IF.7a, 7e") are not mapped in phase 1 – the whole standard is listed.
The official Appendix A URL now redirects to the main standards PDF (checked 2026-10-20); the course lists were read from the Internet Archive copy of the official file (captured 2022-10-06; PDF created 2010-08-05).
Does my state use these standards?
Your state may use its own standards. Common Core is not federal law: each state decides. For math (compiled 2026-10-20, check your state's site before relying on it):
- Use their own standards, not Common Core (14): Alabama, Alaska, Florida, Georgia, Indiana, Kentucky, Minnesota, Missouri, Nebraska, Oklahoma, South Carolina, Tennessee, Texas, Virginia. Codes on this page won't match your state's paperwork.
- Adapted and renamed (24): Arizona, Arkansas, Colorado, Idaho, Kansas, Louisiana, Maine, Maryland, Massachusetts, Mississippi, Montana, New Hampshire, New Jersey, New York, North Carolina, North Dakota, Ohio, Oregon, Pennsylvania, South Dakota, Utah, West Virginia, Wisconsin, Wyoming. Mostly similar, but check wording and codes.
- Common Core as written (13): California, Connecticut, Delaware, District of Columbia, Hawaii, Illinois, Iowa, Michigan, Nevada, New Mexico, Rhode Island, Vermont, Washington.
The standards
Standards are grouped into domains (big areas such as Operations & Algebraic Thinking) and clusters (the bold lines). Each code links to the official page. ★ marks a modeling standard and (+) additional mathematics for advanced courses.
Unit 1: Congruence, Proof, and Constructions 13 standards
- HSG.CO.A.1 Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of point, line, distance along a line, and distance around a circular arc.
- HSG.CO.A.2 Represent transformations in the plane using, e.g., transparencies and geometry software; describe transformations as functions that take points in the plane as inputs and give other points as outputs. Compare transformations that preserve distance and angle to those that do not (e.g., translation versus horizontal stretch).
- HSG.CO.A.3 Given a rectangle, parallelogram, trapezoid, or regular polygon, describe the rotations and reflections that carry it onto itself.
- HSG.CO.A.4 Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel lines, and line segments.
- HSG.CO.A.5 Given a geometric figure and a rotation, reflection, or translation, draw the transformed figure using, e.g., graph paper, tracing paper, or geometry software. Specify a sequence of transformations that will carry a given figure onto another.
- HSG.CO.B.6 Use geometric descriptions of rigid motions to transform figures and to predict the effect of a given rigid motion on a given figure; given two figures, use the definition of congruence in terms of rigid motions to decide if they are congruent.
- HSG.CO.B.7 Use the definition of congruence in terms of rigid motions to show that two triangles are congruent if and only if corresponding pairs of sides and corresponding pairs of angles are congruent.
- HSG.CO.B.8 Explain how the criteria for triangle congruence (ASA, SAS, and SSS) follow from the definition of congruence in terms of rigid motions.
- HSG.CO.C.9 Prove theorems about lines and angles. Theorems include: vertical angles are congruent; when a transversal crosses parallel lines, alternate interior angles are congruent and corresponding angles are congruent; points on a perpendicular bisector of a line segment are exactly those equidistant from the segment's endpoints.
- HSG.CO.C.10 Prove theorems about triangles. Theorems include: measures of interior angles of a triangle sum to 180°; base angles of isosceles triangles are congruent; the segment joining midpoints of two sides of a triangle is parallel to the third side and half the length; the medians of a triangle meet at a point.
- HSG.CO.C.11 Prove theorems about parallelograms. Theorems include: opposite sides are congruent, opposite angles are congruent, the diagonals of a parallelogram bisect each other, and conversely, rectangles are parallelograms with congruent diagonals.
- HSG.CO.D.12 Make formal geometric constructions with a variety of tools and methods (compass and straightedge, string, reflective devices, paper folding, dynamic geometric software, etc.). Copying a segment; copying an angle; bisecting a segment; bisecting an angle; constructing perpendicular lines, including the perpendicular bisector of a line segment; and constructing a line parallel to a given line through a point not on the line.
- HSG.CO.D.13 Construct an equilateral triangle, a square, and a regular hexagon inscribed in a circle.
Unit 2: Similarity, Proof, and Trigonometry 14 standards
- HSG.SRT.A.1 Verify experimentally the properties of dilations given by a center and a scale factor:
- HSG.SRT.A.1.a A dilation takes a line not passing through the center of the dilation to a parallel line, and leaves a line passing through the center unchanged.
- HSG.SRT.A.1.b The dilation of a line segment is longer or shorter in the ratio given by the scale factor.
- HSG.SRT.A.2 Given two figures, use the definition of similarity in terms of similarity transformations to decide if they are similar; explain using similarity transformations the meaning of similarity for triangles as the equality of all corresponding pairs of angles and the proportionality of all corresponding pairs of sides.
- HSG.SRT.A.3 Use the properties of similarity transformations to establish the AA criterion for two triangles to be similar.
- HSG.SRT.B.4 Prove theorems about triangles. Theorems include: a line parallel to one side of a triangle divides the other two proportionally, and conversely; the Pythagorean Theorem proved using triangle similarity.
- HSG.SRT.B.5 Use congruence and similarity criteria for triangles to solve problems and to prove relationships in geometric figures.
- HSG.SRT.C.6 Understand that by similarity, side ratios in right triangles are properties of the angles in the triangle, leading to definitions of trigonometric ratios for acute angles.
- HSG.SRT.C.7 Explain and use the relationship between the sine and cosine of complementary angles.
- HSG.SRT.C.8 Use trigonometric ratios and the Pythagorean Theorem to solve right triangles in applied problems.*★
- HSG.MG.A.1 Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder).*★
- HSG.MG.A.2 Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, BTUs per cubic foot).*★
- HSG.MG.A.3 Apply geometric methods to solve design problems (e.g., designing an object or structure to satisfy physical constraints or minimize cost; working with typographic grid systems based on ratios).*★
- HSG.SRT.D.9 (+) Derive the formula A = 1/2 ab sin(C) for the area of a triangle by drawing an auxiliary line from a vertex perpendicular to the opposite side.(+)
- HSG.SRT.D.10 (+) Prove the Laws of Sines and Cosines and use them to solve problems.(+)
- HSG.SRT.D.11 (+) Understand and apply the Law of Sines and the Law of Cosines to find unknown measurements in right and non-right triangles (e.g., surveying problems, resultant forces).(+)
Unit 3: Extending to Three Dimensions 4 standards
- HSG.GMD.A.1 Give an informal argument for the formulas for the circumference of a circle, area of a circle, volume of a cylinder, pyramid, and cone. Use dissection arguments, Cavalieri's principle, and informal limit arguments.
- HSG.GMD.A.3 Use volume formulas for cylinders, pyramids, cones, and spheres to solve problems.*★
- HSG.GMD.B.4 Identify the shapes of two-dimensional cross-sections of three-dimensional objects, and identify three-dimensional objects generated by rotations of two-dimensional objects.
- HSG.MG.A.1 Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder).*★
Unit 4: Connecting Algebra and Geometry Through Coordinates 5 standards
- HSG.GPE.B.4 Use coordinates to prove simple geometric theorems algebraically. For example, prove or disprove that a figure defined by four given points in the coordinate plane is a rectangle; prove or disprove that the point (1, √3) lies on the circle centered at the origin and containing the point (0, 2).
- HSG.GPE.B.5 Prove the slope criteria for parallel and perpendicular lines and use them to solve geometric problems (e.g., find the equation of a line parallel or perpendicular to a given line that passes through a given point).
- HSG.GPE.B.6 Find the point on a directed line segment between two given points that partitions the segment in a given ratio.
- HSG.GPE.B.7 Use coordinates to compute perimeters of polygons and areas of triangles and rectangles, e.g., using the distance formula.*★
- HSG.GPE.A.2 Derive the equation of a parabola given a focus and directrix.
Unit 5: Circles With and Without Coordinates 8 standards
- HSG.C.A.1 Prove that all circles are similar.
- HSG.C.A.2 Identify and describe relationships among inscribed angles, radii, and chords. Include the relationship between central, inscribed, and circumscribed angles; inscribed angles on a diameter are right angles; the radius of a circle is perpendicular to the tangent where the radius intersects the circle.
- HSG.C.A.3 Construct the inscribed and circumscribed circles of a triangle, and prove properties of angles for a quadrilateral inscribed in a circle.
- HSG.C.A.4 (+) Construct a tangent line from a point outside a given circle to the circle.(+)
- HSG.C.B.5 Derive using similarity the fact that the length of the arc intercepted by an angle is proportional to the radius, and define the radian measure of the angle as the constant of proportionality; derive the formula for the area of a sector.
- HSG.GPE.A.1 Derive the equation of a circle of given center and radius using the Pythagorean Theorem; complete the square to find the center and radius of a circle given by an equation.
- HSG.GPE.B.4 Use coordinates to prove simple geometric theorems algebraically. For example, prove or disprove that a figure defined by four given points in the coordinate plane is a rectangle; prove or disprove that the point (1, √3) lies on the circle centered at the origin and containing the point (0, 2).
- HSG.MG.A.1 Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder).*★
Unit 6: Applications of Probability 11 standards
- HSS.CP.A.1 Describe events as subsets of a sample space (the set of outcomes) using characteristics (or categories) of the outcomes, or as unions, intersections, or complements of other events ("or," "and," "not").
- HSS.CP.A.2 Understand that two events A and B are independent if the probability of A and B occurring together is the product of their probabilities, and use this characterization to determine if they are independent.
- HSS.CP.A.3 Understand the conditional probability of A given B as P(A and B)/P(B), and interpret independence of A and B as saying that the conditional probability of A given B is the same as the probability of A, and the conditional probability of B given A is the same as the probability of B.
- HSS.CP.A.4 Construct and interpret two-way frequency tables of data when two categories are associated with each object being classified. Use the two-way table as a sample space to decide if events are independent and to approximate conditional probabilities. For example, collect data from a random sample of students in your school on their favorite subject among math, science, and English. Estimate the probability that a randomly selected student from your school will favor science given that the student is in tenth grade. Do the same for other subjects and compare the results.
- HSS.CP.A.5 Recognize and explain the concepts of conditional probability and independence in everyday language and everyday situations. For example, compare the chance of having lung cancer if you are a smoker with the chance of being a smoker if you have lung cancer.
- HSS.CP.B.6 Find the conditional probability of A given B as the fraction of B's outcomes that also belong to A, and interpret the answer in terms of the model.
- HSS.CP.B.7 Apply the Addition Rule, P(A or B) = P(A) + P(B) - P(A and B), and interpret the answer in terms of the model.
- HSS.CP.B.8 (+) Apply the general Multiplication Rule in a uniform probability model, P(A and B) = P(A)P(B|A) = P(B)P(A|B), and interpret the answer in terms of the model.(+)
- HSS.CP.B.9 (+) Use permutations and combinations to compute probabilities of compound events and solve problems.(+)
- HSS.MD.B.6 (+) Use probabilities to make fair decisions (e.g., drawing by lots, using a random number generator).(+)
- HSS.MD.B.7 (+) Analyze decisions and strategies using probability concepts (e.g., product testing, medical testing, pulling a hockey goalie at the end of a game).(+)
Standards for Mathematical Practice apply to every grade and course
- MP1 Make sense of problems and persevere in solving them.
- MP2 Reason abstractly and quantitatively.
- MP3 Construct viable arguments and critique the reasoning of others.
- MP4 Model with mathematics.
- MP5 Use appropriate tools strategically.
- MP6 Attend to precision.
- MP7 Look for and make use of structure.
- MP8 Look for and express regularity in repeated reasoning.
Tests and key dates
Each state sets its own tests and testing windows. Check your state education department (links on our state list) and your district calendar.
Official documents
- CCSS Mathematics Appendix A (official address – now redirects)
- CCSS Mathematics Appendix A (Internet Archive copy of the official file)
- Official standards page: Math › Content
Trusted free resources
- Khan Academy – Free practice, videos and teacher tools (US grades and courses).
Links only: we don't copy their content and we aren't connected to these organisations.
More packs
Related: Kindergarten Math, Grade 1 Math, Grade 2 Math, Grade 3 Math, Grade 4 Math, Grade 5 Math, Grade 6 Math, Grade 7 Math.
© Copyright 2010. National Governors Association Center for Best Practices and Council of Chief State School Officers. All rights reserved.
The Common Core State Standards are owned and developed by the National Governors Association Center for Best Practices (NGA Center) and the Council of Chief State School Officers (CCSSO), and are shown here under the Common Core State Standards Public License. Examples from the official site are not included. Classfern is not affiliated with or endorsed by NGA Center or CCSSO. Each standard links to its official page.
Frequently asked questions
Do all states use the Common Core math standards?
No. In our 2026-10-20 review of the 50 states and DC, 13 use the Common Core math standards as written, 24 use an adapted version under their own name, and 14 use their own standards. Check your state's education website.
What does a code like 3.OA.A.1 mean?
It is the official Common Core identifier: grade (3), domain (OA = Operations and Algebraic Thinking), cluster (A) and standard number (1). The full form is CCSS.Math.Content.3.OA.A.1.
Where does this Geometry course list come from?
From the traditional pathway in the official CCSS Mathematics Appendix A, which is a model, not a requirement. Your state or district may group standards differently.