▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Tyre markings: size, load index, speed rating and date code – Motor Vehicle Theory motor mechanics lesson

Lesson 85 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Decode the writing on a tyre's sidewall – size, construction, load index, speed symbol, date code and maximum pressure – and use the size code to work out a tyre's overall diameter.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

The calculations use percentages and unit conversion (1 inch = 25.4 mm). Reading tyre markings is a safe, look-only activity; choosing and fitting tyres is for trained fitters. Values are dated; check the official source before relying on them. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think the size code mixes millimetres for the width with inches for the rim? What problems might come from changing it now?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the load index is the load in kilograms. It is a code. The tyre maker's chart turns it into a load.
  • Inflating to the maximum pressure on the sidewall. That is the tyre's upper limit, not the right pressure for the car. Use the vehicle maker's figure.
  • Reading the date code 0308 as the year 2003. The first two digits are the week and the last two the year: 0308 is the third week of 2008.

Hands-on: With a qualified adult, look at (do not touch the valve or adjust anything) the tyres of a parked, switched-off car on level ground. Copy down the size code, the load index and speed symbol, and the four-digit date code from one tyre. Work out its overall diameter and its age. Then find the recommended pressures in the car's handbook and compare them with the maximum on the sidewall.

What you will learn

  • I can explain each part of a tyre size code such as 205/55 R16 91V.
  • I can calculate sidewall height and overall diameter from a size code.
  • I can explain what the load index and speed symbol mean and where their values are found.
  • I can read the week and year of manufacture from a four-digit date code.
  • I can explain why the maximum pressure on the sidewall is not the pressure to use.

Key words

section width
The width of the tyre from sidewall to sidewall, in millimetres – the first number of the size code.
aspect ratio
The height of the sidewall as a percentage of the section width – the number after the slash.
load index
A code number for the greatest load the tyre may carry at its maximum pressure. The tyre maker's chart turns it into a mass.
speed symbol
A letter showing the highest speed the tyre is designed for when carrying its rated load. The tyre maker's chart gives the speed for each letter.
date code
Four digits on the sidewall giving the week and year the tyre was made: 0308 means the third week of 2008.

The big ideas

The sidewall of every tyre carries a set of codes that tell a fitter exactly what the tyre is: its size, its construction, how much load it can carry, how fast it may be driven, and when it was made. Learning to read them is one of the first skills in tyre work, and it lets anyone check that the right tyres are fitted.

The main code looks like this: 205/55 R16 91V. The first three parts give the size: 205 mm wide, a sidewall 55% as tall as the width, radial construction, to fit a 16-inch rim. The last part is the service description: load index 91 and speed symbol V.

Elsewhere on the sidewall are the date code, the maximum load and maximum pressure, and any arrows or words that show which way round the tyre must be fitted. This lesson explains what each marking means. Choosing and fitting tyres is work for a trained fitter using the vehicle maker's data.

Read-through: the teaching steps

  1. The size code

    Take 205/55 R16:

    • 205 – section width in millimetres.
    • 55 – aspect ratio: the sidewall height is 55% of the width.
    • R – radial construction.
    • 16 – rim diameter in inches.

    In the US, a size may start with P (passenger car) or LT (light truck). Mixing millimetres and inches in one code is normal and simply follows long-standing practice. See the drawing on the lesson page.

    205 / 55 R 16 91 VWidthin mmSidewall height% of widthRadialRim sizein inchesLoad indexSpeed rating
    Reading a tyre size code.
  2. Working out the overall diameter

    Sidewall height = width × aspect ratio ÷ 100. For 205/55: 205 × 55 ÷ 100 = 112.75 mm.

    Overall diameter = rim diameter + two sidewalls. The rim is 16 × 25.4 = 406.4 mm. So the diameter is 406.4 + 2 × 112.75 = 631.9 mm.

    This is why a car can take different sizes that look quite different – such as 195/65 R15 and 225/45 R17 – but have almost the same overall diameter, so the speedometer and gearing are not upset.

  3. Load index and speed symbol

    After the size comes the service description, for example 91V.

    • 91 is the load index – a code for the greatest load the tyre may carry. It is not the load in kilograms; the tyre maker's chart converts it.
    • V is the speed symbol – a code for the highest speed the tyre is designed for. Again, the chart gives the speed.

    Replacement tyres must have a load index and speed symbol at least as high as the vehicle maker specifies.

  4. The date code

    Tyres carry a four-digit date code. The first two digits are the week and the last two the year: 2219 means the 22nd week of 2019.

    Rubber ages even on a tyre that is rarely used, so the age is worth knowing. A tyre fitter can advise on an older tyre.

  5. Maximum pressure and other markings

    The sidewall shows a maximum load and a maximum pressure. The maximum pressure is a safe upper limit for the tyre, not the pressure to use on the car. The correct pressure is the vehicle maker's figure – in the handbook and, on most cars, on a label on the car.

    Other markings may include:

    • an arrow and the word ROTATION on directional tyres;
    • OUTSIDE or INSIDE on asymmetric tyres;
    • tread wear indicator marks showing where the wear bars are;
    • XL or Reinforced for a higher load version.
  6. Markings and the MOT

    The MOT inspection manual (section 5.2.3) uses the markings. Tyres of different sizes on the same axle are a major defect. A tyre not fitted as its sidewall instructions say, or not seated correctly, is major. A tyre whose load capacity or speed rating does not meet the minimum requirements is major. The 10-year tyre age rule in the manual applies to vehicles with more than 8 passenger seats, not to cars.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Wheels and tyres lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.