Tire markings: size, load index, speed rating and date code – Motor Vehicle Theory motor mechanics lesson
Lesson 85 of 131 in the Motor Vehicle Theory course (ages 16+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Decode the writing on a tire's sidewall – size, construction, load index, speed symbol, date code and maximum pressure – and use the size code to work out a tire's overall diameter.
- Time
- 45 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.
How to use this lesson
The calculations use percentages and unit conversion (1 inch = 25.4 mm). Reading tire markings is a safe, look-only activity; choosing and fitting tires is for trained fitters. Values are dated; check the official source before relying on them. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think the size code mixes millimeters for the width with inches for the rim? What problems might come from changing it now?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the load index is the load in kilograms. It is a code. The tire maker's chart turns it into a load.
- Inflating to the maximum pressure on the sidewall. That is the tire's upper limit, not the right pressure for the car. Use the vehicle maker's figure.
- Reading the date code 0308 as the year 2003. The first two digits are the week and the last two the year: 0308 is the third week of 2008.
Hands-on: With a qualified adult, look at (do not touch the valve or adjust anything) the tires of a parked, switched-off car on level ground. Copy down the size code, the load index and speed symbol, and the last four digits of the DOT number from one tire. Work out its overall diameter and its age. Then find the Tire and Loading Information Label on the driver's door edge and compare its pressure with the maximum on the sidewall.
What you will learn
- I can explain each part of a tire size code such as 205/55 R16 91V.
- I can calculate sidewall height and overall diameter from a size code.
- I can explain what the load index and speed symbol mean and where their values are found.
- I can read the week and year of manufacture from a four-digit date code.
- I can explain why the maximum pressure on the sidewall is not the pressure to use.
Key words
- section width
- The width of the tire from sidewall to sidewall, in millimeters – the first number of the size code.
- aspect ratio
- The height of the sidewall as a percentage of the section width – the number after the slash.
- load index
- A code number for the greatest load the tire may carry at its maximum pressure. The tire maker's chart turns it into a mass.
- speed symbol
- A letter showing the highest speed the tire is designed for when carrying its rated load. The tire maker's chart gives the speed for each letter.
- date code
- Four digits on the sidewall giving the week and year the tire was made: 0308 means the third week of 2008.
The big ideas
The sidewall of every tire carries a set of codes that tell a fitter exactly what the tire is: its size, its construction, how much load it can carry, how fast it may be driven, and when it was made. Learning to read them is one of the first skills in tire work, and it lets anyone check that the right tires are fitted.
The main code looks like this: 205/55 R16 91V. The first three parts give the size: 205 mm wide, a sidewall 55% as tall as the width, radial construction, to fit a 16-inch rim. The last part is the service description: load index 91 and speed symbol V.
Elsewhere on the sidewall are the date code, the maximum load and maximum pressure, and any arrows or words that show which way round the tire must be fitted. This lesson explains what each marking means. Choosing and fitting tires is work for a trained fitter using the vehicle maker's data.
Read-through: the teaching steps
The size code
Take 205/55 R16:
- 205 – section width in millimeters.
- 55 – aspect ratio: the sidewall height is 55% of the width.
- R – radial construction.
- 16 – rim diameter in inches.
In the US, a size may start with P (passenger car) or LT (light truck). Mixing millimeters and inches in one code is normal and simply follows long-standing practice. See the drawing on the lesson page.
Reading a tire size code. Working out the overall diameter
Sidewall height = width × aspect ratio ÷ 100. For 205/55: 205 × 55 ÷ 100 = 112.75 mm.
Overall diameter = rim diameter + two sidewalls. The rim is 16 × 25.4 = 406.4 mm. So the diameter is 406.4 + 2 × 112.75 = 631.9 mm.
This is why a car can take different sizes that look quite different – such as 195/65 R15 and 225/45 R17 – but have almost the same overall diameter, so the speedometer and gearing are not upset.
Load index and speed symbol
After the size comes the service description, for example 91V.
- 91 is the load index – a code for the greatest load the tire may carry. It is not the load in kilograms; the tire maker's chart converts it.
- V is the speed symbol – a code for the highest speed the tire is designed for. Again, the chart gives the speed.
Replacement tires must have a load index and speed symbol at least as high as the vehicle maker specifies.
The date code
Tires carry a four-digit date code. The first two digits are the week and the last two the year: 2219 means the 22nd week of 2019.
The code is the last four digits of the Tire Identification Number, after the letters DOT. Rubber ages even on a tire that is rarely used. NHTSA notes that some manufacturers recommend replacing tires six to 10 years old regardless of tread.
Maximum pressure and other markings
The sidewall shows a maximum load and a maximum pressure. The maximum pressure is a safe upper limit for the tire, not the pressure to use on the car. The correct pressure is the vehicle maker's figure – in the handbook and, on most cars, on a label on the car.
Other markings may include:
- an arrow and the word ROTATION on directional tires;
- OUTSIDE or INSIDE on asymmetric tires;
- tread wear indicator marks showing where the wear bars are;
- XL or Reinforced for a higher load version.
Markings and US rules
US federal rules require the sidewall to show the symbol DOT (a certification that the tire meets federal safety standards), the maximum permissible inflation pressure and the maximum load rating. The Tire Identification Number's last four digits give the week and year. NHTSA also says the correct pressure is on the vehicle's Tire and Loading Information Label (on the driver's door edge or doorjamb) or in the owner's manual, not the number on the tire.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Wheels and tires lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.