Tyre pressure: units, checks and effects – Garage Basics motor mechanics lesson
Lesson 45 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out what tyre pressure is, convert between bar, psi and kPa, and see why the Highway Code says to check pressures when tyres are cold.
- Time
- 40 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
Please handle any pump or gauge yourself if your child is young, and never over-inflate a ball or bicycle tyre. Car tyres are inflated by adults, using the car maker's figures. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think tyre pressures should be checked more often before a long journey or when the car is fully loaded?”
- Later: the homework, then the practice test.
Watch out for
- Using the maximum pressure printed on the tyre. That is the most the tyre can hold. Use the car maker's pressures from the handbook.
- Checking pressures straight after a long drive. Warm air reads higher. Check when cold, as the Highway Code says.
- Thinking a tyre that looks fine is at the right pressure. Modern tyres can look normal even when quite low. Only a gauge shows the pressure.
Hands-on: Pump up a bicycle tyre or a football with an adult, using a pump with a gauge. Read the pressure in psi and bar. Then put the ball in a warm room for an hour (or a cool place) and read it again. Finally, with an adult, find the tyre pressure label on a parked car (inside the door frame or fuel filler flap) and convert its numbers into the other unit.
What your child will learn
- I can explain that tyre pressure is the force of the air on each unit of area inside the tyre.
- I can convert between bar, psi and kPa.
- I can explain why pressures are checked when the tyres are cold.
- I can describe the effects of under-inflation and over-inflation.
- I can work out how far a tyre is below its recommended pressure, as a percentage.
Key words
- tyre pressure
- How hard the air inside a tyre pushes outwards, measured above the pressure of the air around us.
- psi
- Pounds per square inch: a unit of pressure. 1 bar is about 14.5 psi.
- bar
- A unit of pressure roughly equal to the pressure of the air around us at sea level. 1 bar = 100 kPa.
- kPa
- Kilopascals: the SI unit of pressure used in science. 1 kPa = 1,000 pascals.
- TPMS
- Tyre pressure monitoring system: sensors that warn the driver when a tyre is badly under-inflated.
The big ideas
A car rests on four small patches of rubber, each about the size of a hand. What holds the car up is air pressure: the air inside each tyre pushes outwards, and the tyre carries the car's weight on that pushed-out shape. Get the pressure wrong and everything that depends on those patches, including steering, braking, grip and tyre life, suffers.
In the UK pressures are usually given in bar and psi (pounds per square inch); scientists use kilopascals (kPa). A typical car might need around 2.2 to 2.5 bar, about 32 to 36 psi, but the right figures for each car are in its handbook, often with a label inside the door frame or fuel filler flap.
The Highway Code (Annex 6) says to check tyre pressures weekly and before a journey, when the tyres are cold, because warm tyres may give a misleading reading. It also notes that under- or over-inflation can affect braking and steering. Many cars now have a tyre pressure monitoring system that warns when a tyre is low. Inflating and fitting tyres should be left to an adult or a trained technician.
Read-through: the teaching steps
What pressure is
Pressure = force ÷ area. The air inside a tyre presses on every square centimetre of the inside. Tyre gauges show the pressure above the surrounding air pressure, so a flat tyre reads 0.
Reading a tyre size code. Units and converting
- 1 bar = 100 kPa
- 1 bar ≈ 14.5 psi
- 1 psi ≈ 6.9 kPa
To change bar into psi, multiply by 14.5. To change psi into bar, divide by 14.5. For example, 2.4 bar × 14.5 = 34.8 psi.
Check when cold
Air expands when it is warm. After driving, tyres warm up and the pressure rises, so a reading taken then is higher than the cold pressure. The Highway Code says to check when the tyres are cold.
Too low
An under-inflated tyre bulges at the sides. Its shoulders carry the load, so the outer edges wear faster. It flexes more, gets hotter and has more rolling resistance, so the car uses more fuel. Steering feels heavy and vague, and the tyre can overheat and fail.
Too high
An over-inflated tyre bulges in the middle of the tread. The contact patch shrinks, so there is less grip, especially in the wet, and the centre of the tread wears faster. The ride is harsher.
Warning systems
A tyre pressure monitoring system (TPMS) warns the driver when a tyre is low. The MOT inspection manual checks that the TPMS on newer cars is working. A warning light alone does not replace regular checks.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Wheels and tyres lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- The Highway Code – Annex 6. Vehicle maintenance, safety and security
- DVSA MOT inspection manual: cars and passenger vehicles – 5. Axles, wheels, tyres and suspension
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.