▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Tire pressure: units, checks and effects – Garage Basics motor mechanics lesson

Lesson 45 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out what tire pressure is, convert between psi, bar and kPa, and see why NHTSA says to check pressures monthly when tires are cold.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Please handle any pump or gauge yourself if your child is young, and never over-inflate a ball or bicycle tire. Car tires are inflated by adults, using the car maker's figures. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think tire pressures should be checked more often before a long journey or when the car is fully loaded?”
  4. Later: the homework, then the practice test.

Watch out for

  • Using the maximum pressure printed on the tire. NHTSA says to use the vehicle's label or owner's manual, not the number on the tire.
  • Checking pressures straight after a long drive. Warm air reads higher. NHTSA says to check when cold.
  • Thinking a tire that looks fine is at the right pressure. Modern tires can look normal even when quite low. Only a gauge shows the pressure.

Hands-on: Pump up a bicycle tire or a football with an adult, using a pump with a gauge. Read the pressure in psi. Then put the ball in a warm room for an hour (or a cool place) and read it again. Finally, with an adult, find the Tire and Loading Information label on the driver's door edge of a parked car and convert its psi into bar.

What your child will learn

  • I can explain that tire pressure is the force of the air on each unit of area inside the tire.
  • I can convert between bar, psi and kPa.
  • I can explain why pressures are checked when the tires are cold.
  • I can describe the effects of under-inflation and over-inflation.
  • I can work out how far a tire is below its recommended pressure, as a percentage.

Key words

tire pressure
How hard the air inside a tire pushes outwards, measured above the pressure of the air around us.
psi
Pounds per square inch: a unit of pressure. 1 bar is about 14.5 psi.
bar
A unit of pressure roughly equal to the pressure of the air around us at sea level. 1 bar = 100 kPa.
kPa
Kilopascals: the SI unit of pressure used in science. 1 kPa = 1,000 pascals.
TPMS
Tire pressure monitoring system: sensors that warn the driver when a tire is badly under-inflated.

The big ideas

A car rests on four small patches of rubber, each about the size of a hand. What holds the car up is air pressure: the air inside each tire pushes outwards, and the tire carries the car's weight on that pushed-out shape. Get the pressure wrong and everything that depends on those patches, including steering, braking, grip and tire life, suffers.

In the US pressures are given in psi (pounds per square inch); scientists use kilopascals (kPa), and some gauges show bar. A typical car might need around 32 to 36 psi, but NHTSA says to use the pressure on the vehicle's Tire and Loading Information label (on the driver's door edge or doorjamb) or in the owner's manual, not the number on the tire.

NHTSA says to check the pressure of all tires, including the spare, at least once a month, when the tires are cold (not driven for at least three hours). Since model year 2008, passenger cars, light trucks and vans must have a tire pressure monitoring system (TPMS), which warns when a tire is significantly under-inflated. NHTSA also says proper inflation can save up to 11 cents a gallon and add an average of 4,700 miles to tire life. Inflating and fitting tires should be left to an adult or a trained technician.

Read-through: the teaching steps

  1. What pressure is

    Pressure = force ÷ area. The air inside a tire presses on every square centimeter of the inside. Tire gauges show the pressure above the surrounding air pressure, so a flat tire reads 0.

    205 / 55 R 16 91 VWidthin mmSidewall height% of widthRadialRim sizein inchesLoad indexSpeed rating
    Reading a tire size code.
  2. Units and converting

    • 1 bar = 100 kPa
    • 1 bar ≈ 14.5 psi
    • 1 psi ≈ 6.9 kPa

    To change bar into psi, multiply by 14.5. To change psi into bar, divide by 14.5. For example, 2.4 bar × 14.5 = 34.8 psi.

  3. Check when cold

    Air expands when it is warm. After driving, tires warm up and the pressure rises, so a reading taken then is higher than the cold pressure. NHTSA says to check when the tires are cold, after the car has not been driven for at least three hours.

  4. Too low

    An under-inflated tire bulges at the sides. Its shoulders carry the load, so the outer edges wear faster. It flexes more, gets hotter and has more rolling resistance, so the car uses more fuel. Steering feels heavy and vague, and the tire can overheat and fail.

  5. Too high

    An over-inflated tire bulges in the middle of the tread. The contact patch shrinks, so there is less grip, especially in the wet, and the center of the tread wears faster. The ride is harsher.

  6. Warning systems

    TPMS warns only when a tire is significantly under-inflated, so NHTSA still recommends monthly checks. If the TPMS light flashes for about a minute and then stays on, the system itself has a fault.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Wheels and tires lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.