Force, torque and turning effect – Garage Basics motor mechanics lesson
Lesson 15 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out why a longer spanner makes a stiff nut easier to turn, and work out torque from a force and a distance.
- Time
- 40 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
A calculator is useful. The key idea is that turning effect depends on both the push and the distance from the pivot, which your child can feel with any door. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think door handles are put on the side of the door furthest from the hinges?”
- Later: the homework, then the practice test.
Watch out for
- Using the distance in centimetres. Change centimetres to metres first: divide by 100. 30 cm is 0.3 m.
- Thinking a heavier spanner gives more torque. What counts is the force you apply and how far from the pivot it acts, not the weight of the tool.
- Thinking force and torque are the same thing. Force is a push or pull in newtons. Torque is a turning effect in newton metres, and it depends on distance too.
Hands-on: Open and close a door three times: once pushing near the handle, once halfway across, and once very close to the hinges. Which needs the biggest push? Then lay a ruler over a pencil as a seesaw and balance two coins near one end against a pile of coins nearer the pencil.
What your child will learn
- I can explain what a force and a turning effect are.
- I can calculate torque as force × distance from the pivot.
- I can explain why a longer lever needs less force for the same torque.
- I can find turning effects in a car and on a bicycle.
Key words
- force
- A push or a pull, measured in newtons (N).
- pivot
- The point that something turns about. It is also called the fulcrum or axis.
- torque
- Turning effect: force × perpendicular distance from the pivot, measured in newton metres (N m).
- moment
- Another name for a turning effect, used in science lessons. In a car, people usually say torque.
- perpendicular distance
- The distance from the pivot to the line of the force, measured at right angles to the force.
The big ideas
A force is a push or a pull. Some forces make things move in a straight line; others make things turn. When a force makes something turn about a pivot, we call its turning effect torque (in science lessons it is often called a moment).
Torque depends on two things: how big the force is and how far from the pivot it acts. Torque = force × perpendicular distance. Push with 50 newtons on the end of a spanner 0.3 m long and the torque on the nut is 50 × 0.3 = 15 newton metres (N m). Double the length of the spanner and the same push gives twice the torque.
Cars are full of turning effects. The engine turns the crankshaft, the gearbox changes the torque on its way to the wheels, the driver turns the steering wheel, and every wheel nut is tightened to a set torque. A bicycle works the same way: your foot pushes on the pedal, and the pedal crank turns the chainring.
Read-through: the teaching steps
Forces push and pull
A force is measured in newtons (N). A force of about 10 N is roughly the weight of a 1 kg bag of sugar. Forces can speed things up, slow them down, change their shape, or make them turn.
The pivot
Anything that turns has a pivot: the centre of a wheel, the hinge of a door, the centre of a nut. A force pushing straight through the pivot cannot turn anything. Try pushing a door right at its hinge: nothing happens.
Torque = force × distance
Torque (N m) = force (N) × perpendicular distance from the pivot (m).
The distance must be in metres. A 25 cm spanner is 0.25 m long. Pushing with 80 N on its end gives 80 × 0.25 = 20 N m.
Why a longer lever helps
To get the same torque with a longer lever you need less force. A stiff jar lid, a door handle far from the hinge and a long spanner all use this idea.
- 20 N m with a 0.25 m spanner needs 80 N
- 20 N m with a 0.5 m spanner needs only 40 N
Pushing at an angle
Torque is greatest when you push at right angles to the lever. Push at a slant and only part of the force turns the lever, so the turning effect is smaller. That is why the pedals of a bicycle feel strongest when the crank is level.
Torque in a car
The engine makes torque at the crankshaft. The gearbox and the final drive multiply that torque before it reaches the wheels. At the wheel, torque becomes a pushing force on the road: torque at the wheel ÷ wheel radius = pushing force.
In a workshop, wheel nuts and engine bolts are tightened by a technician to the torque given in the manufacturer's data, using a torque wrench that measures it.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Forces, gears and drivetrain lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.