▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Force, torque and turning effect – Garage Basics motor mechanics lesson

Lesson 15 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out why a longer wrench makes a stiff nut easier to turn, and work out torque from a force and a distance.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

A calculator is useful. The key idea is that turning effect depends on both the push and the distance from the pivot, which your child can feel with any door. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think door handles are put on the side of the door furthest from the hinges?”
  4. Later: the homework, then the practice test.

Watch out for

  • Using the distance in centimeters. Change centimeters to meters first: divide by 100. 30 cm is 0.3 m.
  • Thinking a heavier wrench gives more torque. What counts is the force you apply and how far from the pivot it acts, not the weight of the tool.
  • Thinking force and torque are the same thing. Force is a push or pull in newtons. Torque is a turning effect in newton meters, and it depends on distance too.

Hands-on: Open and close a door three times: once pushing near the handle, once halfway across, and once very close to the hinges. Which needs the biggest push? Then lay a ruler over a pencil as a seesaw and balance two coins near one end against a pile of coins nearer the pencil.

What your child will learn

  • I can explain what a force and a turning effect are.
  • I can calculate torque as force × distance from the pivot.
  • I can explain why a longer lever needs less force for the same torque.
  • I can find turning effects in a car and on a bicycle.

Key words

force
A push or a pull, measured in newtons (N).
pivot
The point that something turns about. It is also called the fulcrum or axis.
torque
Turning effect: force × perpendicular distance from the pivot, measured in newton meters (N m).
moment
Another name for a turning effect, used in science lessons. In a car, people usually say torque.
perpendicular distance
The distance from the pivot to the line of the force, measured at right angles to the force.

The big ideas

A force is a push or a pull. Some forces make things move in a straight line; others make things turn. When a force makes something turn about a pivot, we call its turning effect torque (in science lessons it is often called a moment).

Torque depends on two things: how big the force is and how far from the pivot it acts. Torque = force × perpendicular distance. Push with 50 newtons on the end of a wrench 0.3 m long and the torque on the nut is 50 × 0.3 = 15 newton meters (N m). Double the length of the wrench and the same push gives twice the torque.

Cars are full of turning effects. The engine turns the crankshaft, the transmission changes the torque on its way to the wheels, the driver turns the steering wheel, and every wheel nut is tightened to a set torque. A bicycle works the same way: your foot pushes on the pedal, and the pedal crank turns the chainring.

Read-through: the teaching steps

  1. Forces push and pull

    A force is measured in newtons (N). A force of about 10 N is roughly the weight of a 1 kg bag of sugar. Forces can speed things up, slow them down, change their shape, or make them turn.

  2. The pivot

    Anything that turns has a pivot: the center of a wheel, the hinge of a door, the center of a nut. A force pushing straight through the pivot cannot turn anything. Try pushing a door right at its hinge: nothing happens.

  3. Torque = force × distance

    Torque (N m) = force (N) × perpendicular distance from the pivot (m).

    The distance must be in meters. A 25 cm wrench is 0.25 m long. Pushing with 80 N on its end gives 80 × 0.25 = 20 N m.

  4. Why a longer lever helps

    To get the same torque with a longer lever you need less force. A stiff jar lid, a door handle far from the hinge and a long wrench all use this idea.

    • 20 N m with a 0.25 m wrench needs 80 N
    • 20 N m with a 0.5 m wrench needs only 40 N
  5. Pushing at an angle

    Torque is greatest when you push at right angles to the lever. Push at a slant and only part of the force turns the lever, so the turning effect is smaller. That is why the pedals of a bicycle feel strongest when the crank is level.

  6. Torque in a car

    The engine makes torque at the crankshaft. The transmission and the final drive multiply that torque before it reaches the wheels. At the wheel, torque becomes a pushing force on the road: torque at the wheel ÷ wheel radius = pushing force.

    In a workshop, wheel nuts and engine bolts are tightened by a technician to the torque given in the manufacturer's data, using a torque wrench that measures it.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Forces, gears and drivetrain lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.