▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Power, torque and engine speed – Garage Basics motor mechanics lesson

Lesson 16 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how an engine's torque and its speed together make its power, and calculate power in kilowatts.

Time
45 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

A calculator is needed. The idea to hold on to is power = torque × speed: the same power can come from a strong slow twist or a gentle fast one. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think a tractor and a sports car might have similar power but feel completely different to drive?”
  4. Later: the homework, then the practice test.

Watch out for

  • Using rpm straight in the power formula. Divide rpm by 60 first to get revolutions per second, or your answer will be 60 times too big.
  • Thinking more torque always means more power. Power is torque × speed. A high-torque engine that turns slowly can have less power than a lower-torque engine that turns fast.
  • Forgetting to change watts to kilowatts. Divide watts by 1,000 to get kilowatts.

Hands-on: Walk up a flight of stairs slowly, then (carefully, holding the rail, with an adult watching) at a steady brisk pace. You do the same work both times, because you lift the same weight through the same height, but the faster climb needs more power. Write down which took less time and explain why it felt harder.

What your child will learn

  • I can explain the difference between torque and power.
  • I can change revolutions per minute into revolutions per second.
  • I can calculate power from torque and engine speed.
  • I can explain why a car needs gears to keep its engine in a useful speed range.

Key words

power
How fast energy is transferred or work is done, measured in watts (W). 1 kilowatt (kW) = 1,000 W.
torque
Turning effect, measured in newton metres (N m).
engine speed
How fast the crankshaft turns, usually given in revolutions per minute (rpm).
horsepower
An older unit of power. One horsepower is about 746 W.
rev counter
The dial or display that shows engine speed in rpm. It is also called a tachometer.

The big ideas

Torque and power are often mixed up, but they are different things. Torque is how hard the engine twists its crankshaft. Power is how fast it does work: how much twisting it does every second. An engine that twists hard but slowly and an engine that twists gently but very fast can have the same power.

The link is simple: power = torque × turning speed. For an engine, power (W) = 2 × π × revolutions per second × torque (N m). Because engine speed is usually given in revolutions per minute (rpm), we divide by 60 first.

An engine does not make the same torque at every speed. It makes little at very low speed, most somewhere in the middle, and less again near its top speed. Power usually peaks higher up the rev range than torque does. The gearbox lets the engine stay in its useful speed range whether the car is crawling or cruising.

Read-through: the teaching steps

  1. Torque is twist, power is rate

    Torque tells you how hard the crankshaft is being twisted. Power tells you how much work is done each second. A car with lots of torque pulls strongly from low speed; a car with lots of power can keep accelerating at high speed.

  2. From rpm to revolutions per second

    Engine speed is shown in revolutions per minute (rpm). To get revolutions per second, divide by 60.

    • 3,000 rpm ÷ 60 = 50 revolutions per second
    • 6,000 rpm ÷ 60 = 100 revolutions per second
  3. The power formula

    Each revolution turns the crankshaft through a full circle, which is 2π radians. So:

    Power (W) = 2 × π × revolutions per second × torque (N m)

    Use π = 3.14. An engine making 200 N m at 3,000 rpm (50 revolutions per second) gives 2 × 3.14 × 50 × 200 = 62,800 W, which is 62.8 kW.

  4. Kilowatts and horsepower

    Power is measured in watts. Car engines are usually given in kilowatts (kW) or horsepower (hp). One horsepower is about 746 W, so 1 kW is about 1.34 hp.

    The first Benz Patent Motor Car of 1885–86 had a single-cylinder engine of 0.75 hp (0.55 kW). Many family cars today have 70–150 kW.

  5. The torque curve

    If you plot an engine's torque against its speed you get a hill shape: low at tickover, highest in the middle, falling near the top. A petrol engine usually makes its most power near the top of its range. A diesel engine usually makes strong torque at lower speeds. An electric motor can give its full torque from standstill.

  6. Why gears matter

    The wheels of a car turn far more slowly than the engine. The gearbox lets the engine keep turning in its useful range, where it makes good torque and power, while the road speed changes from walking pace to motorway speed.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Forces, gears and drivetrain lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.