Cooling: thermostat, water pump and radiator – Garage Basics motor mechanics lesson
Lesson 14 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out how an engine gets rid of its waste heat: how coolant carries heat from the engine to the radiator, what the thermostat and water pump do, and how to calculate the heat a coolant can carry.
- Time
- 50 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
The investigation uses warm tap water only. A car's cooling system is pressurised and can scald; it should never be opened while hot. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Some engines, such as many older motorbike engines, are cooled by air instead of liquid. What features would you expect an air-cooled engine to have?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the thermostat is open all the time. It stays closed when the engine is cold so it warms up quickly, then opens at working temperature.
- Thinking a cooler engine is always better. An engine that runs too cold burns fuel poorly and wears faster. It needs to be at its working temperature.
- Thinking antifreeze is only for winter. It also raises the boiling point and stops corrosion all year round.
Hands-on: Investigate surface area: with an adult, fill two identical cups with the same amount of warm (not hot) tap water. Stand one in a shallow tray to spread the water out, keeping the other in its cup. Measure both temperatures with a thermometer every two minutes for ten minutes. Which cools faster? Relate this to the radiator's fins. Use only warm tap water.
What your child will learn
- I can explain why an engine needs a cooling system.
- I can describe the jobs of the water pump, thermostat, radiator, fan and pressure cap.
- I can explain why coolant is a mixture of water and antifreeze.
- I can use Q = m × c × ΔT to calculate the energy carried by coolant.
Key words
- coolant
- The liquid that carries heat away from the engine: water mixed with antifreeze.
- water pump
- The pump, driven by the engine, that pushes coolant round the cooling system.
- thermostat
- A valve that stays closed while the engine is cold and opens when it reaches working temperature, letting coolant flow to the radiator.
- radiator
- A heat exchanger at the front of the car, with thin tubes and fins, where heat passes from the coolant to the air.
- specific heat capacity
- The energy needed to raise the temperature of 1 kg of a substance by 1 °C. For water it is about 4,200 J/kg °C.
The big ideas
Burning fuel produces far more heat than an engine can turn into movement. US Department of Energy figures show that most of a petrol engine's fuel energy – around 60% in combined driving – is lost as heat through the radiator and the exhaust. If that heat stayed in the engine, the metal would expand, the oil film would break down and the engine would seize.
Most car engines are liquid-cooled. Coolant flows through passages around the cylinders and in the cylinder head, picks up heat, and carries it to the radiator at the front of the car. There, air flowing through thin fins carries the heat away. A water pump keeps the coolant moving, and a thermostat makes sure the engine warms up quickly and then stays at the right temperature.
GOV.UK lists the coolant level as one of the regular checks a driver should make. The cooling system works under pressure and the coolant can be scalding hot, so it is never opened while hot – that is a job for the vehicle handbook and a trained technician. This lesson explains how it works.
Read-through: the teaching steps
Why cool an engine?
An engine works best within a narrow temperature range. Too cold, and fuel burns poorly, oil is thick and wear is high. Too hot, and parts expand too much, oil thins and the engine can be badly damaged. The cooling system keeps the engine in the right range. The radiator sits behind the grille at the front, near the engine shown in the drawing on the lesson page.
The main parts you can find on almost every car. The coolant loop
- The water pump pushes coolant through passages in the block and head.
- The coolant picks up heat from the hot metal.
- When the engine is warm, the thermostat is open, so hot coolant flows to the radiator.
- In the radiator, heat passes to the air flowing through the fins.
- The cooled coolant returns to the pump.
The thermostat
The thermostat is a valve that contains wax. When the engine is cold, it stays closed, so coolant circulates only around the engine and it warms up quickly. At working temperature – typically around 90 °C – the wax melts and expands, pushing the valve open so coolant can flow to the radiator.
Radiator, fan and pressure cap
The radiator has many thin tubes and fins, giving a large surface area for heat to pass into the air. When the car moves, air rushes through it. When the car is slow or stopped, an electric fan pulls air through. The system is sealed under pressure by the pressure cap, which raises the coolant's boiling point so it does not boil at working temperature.
Why antifreeze?
Coolant is water mixed with antifreeze (usually based on ethylene glycol). Water carries heat very well, but it freezes at 0 °C and expands, which can crack an engine block. Antifreeze lowers the freezing point, raises the boiling point and contains chemicals that stop corrosion inside the engine. The heater inside the car uses hot coolant too, flowing through a small radiator called the heater matrix.
Calculating heat carried
The energy needed to warm a substance is:
Q = m × c × ΔT
where Q is energy in joules, m is mass in kg, c is specific heat capacity in J/kg °C and ΔT is the temperature change in °C (science uses degrees Celsius).
For 5 kg of water warmed by 10 °C: Q = 5 × 4,200 × 10 = 210,000 J = 210 kJ.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 15 min | Not assessed, self-checked |
| Worked examples and guided practice | 10 min | Marked by Classfern |
| Independent practice (three levels) | 16 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- GOV.UK – Check your vehicle is safe to drive
- US Department of Energy, Alternative Fuels Data Center – How do gasoline cars work?
- US Department of Energy, Vehicle Technologies Office – Fact #709: engine energy use, where does the energy go?
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.