▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Engine size: bore, stroke and cubic capacity – Garage Basics motor mechanics lesson

Lesson 4 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out what bore and stroke mean, and use the formula for the volume of a cylinder to work out the size of an engine in cubic centimetres and litres.

Time
50 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

A calculator with a π button helps. The water activity uses only a cup, a ruler and a measuring jug. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Car makers have been making engines smaller in recent years. Why do you think that is?”
  4. Later: the homework, then the practice test.

Watch out for

  • Using the bore as the radius. The bore is the diameter. Halve it for the radius, or use π/4 × bore².
  • Calculating in millimetres and expecting cc. mm³ are a thousand times smaller than cm³. Change to centimetres first, or divide an answer in mm³ by 1,000.
  • Forgetting to multiply by the number of cylinders. The swept volume formula gives one cylinder. Engine capacity is for all of them.

Hands-on: Use a kitchen measuring jug and a tall plastic cup or tin can as a "cylinder". Measure its diameter (bore) and choose a height of 10 cm as the "stroke". Calculate the volume with π/4 × bore² × stroke, then fill the cup with water to 10 cm and pour it into the jug. 1 cm³ = 1 ml, so compare your answer with the jug reading.

What your child will learn

  • I can explain what bore, stroke and swept volume mean.
  • I can calculate the swept volume of one cylinder from its bore and stroke.
  • I can calculate the total capacity of an engine and give it in cm³ and litres.
  • I can explain why a bigger engine is not always better.

Key words

bore
The diameter of a cylinder: how wide it is across.
stroke
How far the piston travels from top dead centre to bottom dead centre.
swept volume
The volume the piston sweeps through in one stroke. It is the volume of a cylinder with the bore as diameter and the stroke as height.
engine capacity
The swept volume of one cylinder multiplied by the number of cylinders. Also called displacement.
cc
Cubic centimetres (cm³). 1,000 cc = 1 litre.

The big ideas

When people talk about a "1.6-litre engine" or a "125 cc motorbike", they are talking about engine capacity: the total volume swept by all the pistons. It is one of the most important numbers about an engine, because it sets how much air (and fuel) the engine can take in on each cycle.

Two measurements decide the swept volume of one cylinder. The bore is the diameter of the cylinder. The stroke is how far the piston moves from top to bottom. The space the piston sweeps through is a cylinder shape, so we can use the formula for the volume of a cylinder:

Swept volume = π × (bore ÷ 2)² × stroke = π/4 × bore² × stroke.

Multiply by the number of cylinders to get the engine capacity. Measuring bore and stroke in centimetres gives an answer in cubic centimetres (cc), and 1,000 cc is 1 litre.

Read-through: the teaching steps

  1. Bore and stroke

    Imagine looking down into a cylinder. Its width is the bore. Now watch the piston move from its highest point (top dead centre) to its lowest (bottom dead centre). That distance is the stroke. Look at how far the piston moves in the drawing on the lesson page.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. The volume of a cylinder

    The volume of any cylinder = area of the circle × height.

    Area of a circle = π × r², where r is the radius (half the bore).

    So swept volume = π × r² × stroke. Because r = bore ÷ 2, this is the same as π/4 × bore² × stroke, and π/4 ≈ 0.785.

  3. Working in centimetres

    Bore and stroke are usually given in millimetres. Divide by 10 to change them to centimetres before you calculate, so that the answer comes out in cubic centimetres.

    • 86 mm = 8.6 cm
    • Volume in cm³ = cc
  4. From one cylinder to the engine

    Engine capacity = swept volume of one cylinder × number of cylinders.

    For example, a four-cylinder engine with a bore and stroke of 86 mm: one cylinder = 0.785 × 8.6² × 8.6 ≈ 500 cc. Four cylinders ≈ 1,998 cc. Divide by 1,000 and round: about a 2.0-litre engine.

  5. Square, long and short

    When bore equals stroke the engine is called "square". A long-stroke engine (stroke bigger than bore) tends to give strong turning force at low speeds. A short-stroke engine (bore bigger than stroke) can usually spin faster. Engineers choose the shape to suit the vehicle.

  6. Is bigger better?

    A bigger engine can take in more air and fuel per cycle, so it can make more power, but it usually uses more fuel and makes more carbon dioxide. Many modern cars use smaller engines with a turbocharger to get good power with better fuel economy.

The lesson, step by step

50 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task15 minNot assessed, self-checked
Worked examples and guided practice10 minMarked by Classfern
Independent practice (three levels)16 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.