Engine size: bore, stroke and cubic capacity – Garage Basics motor mechanics lesson
Lesson 4 of 70 in the Garage Basics course (ages 11–16)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Find out what bore and stroke mean, and use the formula for the volume of a cylinder to work out the size of an engine in cubic centimeters and liters.
- Time
- 50 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
A calculator with a π button helps. The water activity uses only a cup, a ruler and a measuring jug. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Car makers have been making engines smaller in recent years. Why do you think that is?”
- Later: the homework, then the practice test.
Watch out for
- Using the bore as the radius. The bore is the diameter. Halve it for the radius, or use π/4 × bore².
- Calculating in millimeters and expecting cc. mm³ are a thousand times smaller than cm³. Change to centimeters first, or divide an answer in mm³ by 1,000.
- Forgetting to multiply by the number of cylinders. The swept volume formula gives one cylinder. Engine capacity is for all of them.
Hands-on: Use a kitchen measuring jug and a tall plastic cup or tin can as a "cylinder". Measure its diameter (bore) and choose a height of 10 cm as the "stroke". Calculate the volume with π/4 × bore² × stroke, then fill the cup with water to 10 cm and pour it into the jug. 1 cm³ = 1 ml, so compare your answer with the jug reading.
What your child will learn
- I can explain what bore, stroke and swept volume mean.
- I can calculate the swept volume of one cylinder from its bore and stroke.
- I can calculate the total capacity of an engine and give it in cm³ and liters.
- I can explain why a bigger engine is not always better.
Key words
- bore
- The diameter of a cylinder: how wide it is across.
- stroke
- How far the piston travels from top dead center to bottom dead center.
- swept volume
- The volume the piston sweeps through in one stroke. It is the volume of a cylinder with the bore as diameter and the stroke as height.
- engine capacity
- The swept volume of one cylinder multiplied by the number of cylinders. Also called displacement.
- cc
- Cubic centimeters (cm³). 1,000 cc = 1 liter.
The big ideas
When people talk about a "1.6-liter engine" or a "125 cc motorcycle", they are talking about engine capacity: the total volume swept by all the pistons. It is one of the most important numbers about an engine, because it sets how much air (and fuel) the engine can take in on each cycle.
Two measurements decide the swept volume of one cylinder. The bore is the diameter of the cylinder. The stroke is how far the piston moves from top to bottom. The space the piston sweeps through is a cylinder shape, so we can use the formula for the volume of a cylinder:
Swept volume = π × (bore ÷ 2)² × stroke = π/4 × bore² × stroke.
Multiply by the number of cylinders to get the engine capacity. Measuring bore and stroke in centimeters gives an answer in cubic centimeters (cc), and 1,000 cc is 1 liter.
Read-through: the teaching steps
Bore and stroke
Imagine looking down into a cylinder. Its width is the bore. Now watch the piston move from its highest point (top dead center) to its lowest (bottom dead center). That distance is the stroke. Look at how far the piston moves in the drawing on the lesson page.
The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes. The volume of a cylinder
The volume of any cylinder = area of the circle × height.
Area of a circle = π × r², where r is the radius (half the bore).
So swept volume = π × r² × stroke. Because r = bore ÷ 2, this is the same as π/4 × bore² × stroke, and π/4 ≈ 0.785.
Working in centimeters
Bore and stroke are usually given in millimeters. Divide by 10 to change them to centimeters before you calculate, so that the answer comes out in cubic centimeters.
- 86 mm = 8.6 cm
- Volume in cm³ = cc
From one cylinder to the engine
Engine capacity = swept volume of one cylinder × number of cylinders.
For example, a four-cylinder engine with a bore and stroke of 86 mm: one cylinder = 0.785 × 8.6² × 8.6 ≈ 500 cc. Four cylinders ≈ 1,998 cc. Divide by 1,000 and round: about a 2.0-liter engine.
Square, long and short
When bore equals stroke the engine is called "square". A long-stroke engine (stroke bigger than bore) tends to give strong turning force at low speeds. A short-stroke engine (bore bigger than stroke) can usually spin faster. Engineers choose the shape to suit the vehicle.
Is bigger better?
A bigger engine can take in more air and fuel per cycle, so it can make more power, but it usually uses more fuel and makes more carbon dioxide. Many modern cars use smaller engines with a turbocharger to get good power with better fuel economy. In the US, engine size is often given in liters, and older engines in cubic inches (1 cubic inch ≈ 16.4 cc).
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 15 min | Not assessed, self-checked |
| Worked examples and guided practice | 10 min | Graded by Classfern |
| Independent practice (three levels) | 16 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.