▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Why engines need oil – Young Mechanics motor mechanics lesson

Lesson 7 of 40 in the Young Mechanics course (ages 8–11)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out how a thin layer of oil stops the metal parts of an engine from rubbing, getting too hot and wearing out.

Time
35 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Hand cream shows the idea safely. Please keep engine oil, new or used, away from children; checking the real oil level is a job for an adult. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Where else at home or school do things need oiling so they move smoothly?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking oil is burned to make the car go. Fuel is burned to make the car go. Oil is there to stop parts rubbing; it is not the fuel.
  • Thinking oil lasts for ever. Oil gets dirty and wears out, so it is changed at a garage as the handbook says.
  • Thinking oil only makes things slippery. Oil also cools hot parts and carries dirt to the filter.

Hands-on: Rub your dry hands together quickly for ten seconds and feel the warmth – that is friction. Now put a little hand cream on and rub again: your hands slide much more easily. That is what oil does inside an engine. Then draw the oil's journey as a loop: tray at the bottom → pump → filter → moving parts → back to the tray.

What your child will learn

  • I can explain what friction is and why it causes heat and wear.
  • I can say three jobs that oil does inside an engine.
  • I can describe how oil travels from the oil pan around the engine and back.
  • I can say why the oil level is checked regularly, and why used oil is not touched with bare skin.

Key words

friction
The force that tries to stop two surfaces sliding over each other. It makes heat and wears things away.
lubricate
To put a slippery layer such as oil between moving parts so they slide easily.
engine oil
A special oil that coats the moving parts inside an engine.
oil pan
The metal tray at the bottom of the engine where the oil collects.
oil pump
The part that pushes oil around the inside of the engine.
dipstick
A long thin metal stick used to see how much oil is in the engine.

The big ideas

Inside an engine, metal parts slide and spin against each other thousands of times every minute. Pistons slide up and down in their cylinders, and the crankshaft spins round. If metal rubbed straight on metal, the rubbing – called friction – would make the parts very hot and wear them away. The engine would soon stop working.

Engine oil solves this problem. A thin layer of oil keeps the metal surfaces apart, so they slide over the oil instead of scraping each other. Oil also carries heat away from the hottest parts and picks up tiny bits of dirt.

The oil is kept in a tray at the bottom of the engine. An oil pump pushes it all around the engine, and then it drips back down to be used again. Over time, oil gets dirty and wears out, so it is changed at a garage. The oil level should be checked regularly, and the owner's manual says how often.

Read-through: the teaching steps

  1. Feel friction

    Rub your hands together fast. They get warm – that is friction making heat. Now imagine metal parts rubbing together thousands of times a minute. They would get very hot and wear away. Friction is what oil fights against.

  2. Oil keeps metal apart

    Oil is slippery. A very thin layer of it sits between moving parts, such as a piston and its cylinder. The parts slide on the oil instead of rubbing each other. This is called lubrication.

  3. Three jobs of oil

    • Lubricate – keep moving parts sliding smoothly
    • Cool – carry heat away from hot parts
    • Clean – pick up tiny bits of dirt and metal and carry them to the oil filter
  4. The journey of the oil

    Oil waits in the oil pan, a tray at the bottom of the engine. The oil pump sucks it up and pushes it through an oil filter, which catches dirt. Then it travels along tiny passages to the moving parts. Finally it drips back down to the oil pan, ready to go round again.

  5. Checking the oil

    The owner's manual says how often the engine oil should be checked. An adult checks the level with the dipstick when the engine is off and cold. If the oil warning light comes on while driving, the driver stops safely and gets help.

  6. Used oil is not for hands

    Used engine oil is dirty and can be very hot. HSE (the UK's workplace safety body) warns that frequent skin contact with used engine oil can cause skin problems. Mechanics wear gloves and take old oil to be recycled. Children never touch engine oil.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minGraded by Classfern
Independent practice (three levels)8 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More How cars work lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

About this lesson

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.