Why engines need oil – Young Mechanics motor mechanics lesson
Lesson 7 of 40 in the Young Mechanics course (ages 8–11)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out how a thin layer of oil stops the metal parts of an engine from rubbing, getting too hot and wearing out.
- Time
- 35 minutes + 10 min homework
- Course
- Young Mechanics (ages 8–11)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
Hand cream shows the idea safely. Please keep engine oil, new or used, away from children; checking the real oil level is a job for an adult. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Where else at home or school do things need oiling so they move smoothly?”
- Later: the homework, then the practice test.
Watch out for
- Thinking oil is burned to make the car go. Fuel is burned to make the car go. Oil is there to stop parts rubbing; it is not the fuel.
- Thinking oil lasts for ever. Oil gets dirty and wears out, so it is changed at a garage as the handbook says.
- Thinking oil only makes things slippery. Oil also cools hot parts and carries dirt to the filter.
Hands-on: Rub your dry hands together quickly for ten seconds and feel the warmth – that is friction. Now put a little hand cream on and rub again: your hands slide much more easily. That is what oil does inside an engine. Then draw the oil's journey as a loop: tray at the bottom → pump → filter → moving parts → back to the tray.
What your child will learn
- I can explain what friction is and why it causes heat and wear.
- I can say three jobs that oil does inside an engine.
- I can describe how oil travels from the sump round the engine and back.
- I can say why the oil level is checked regularly, and why used oil is not touched with bare skin.
Key words
- friction
- The force that tries to stop two surfaces sliding over each other. It makes heat and wears things away.
- lubricate
- To put a slippery layer such as oil between moving parts so they slide easily.
- engine oil
- A special oil that coats the moving parts inside an engine.
- sump
- The metal tray at the bottom of the engine where the oil collects.
- oil pump
- The part that pushes oil around the inside of the engine.
- dipstick
- A long thin metal stick used to see how much oil is in the engine.
The big ideas
Inside an engine, metal parts slide and spin against each other thousands of times every minute. Pistons slide up and down in their cylinders, and the crankshaft spins round. If metal rubbed straight on metal, the rubbing – called friction – would make the parts very hot and wear them away. The engine would soon stop working.
Engine oil solves this problem. A thin layer of oil keeps the metal surfaces apart, so they slide over the oil instead of scraping each other. Oil also carries heat away from the hottest parts and picks up tiny bits of dirt.
The oil is kept in a tray at the bottom of the engine. An oil pump pushes it all around the engine, and then it drips back down to be used again. Over time, oil gets dirty and wears out, so it is changed at a garage. The Highway Code and GOV.UK both say the oil level should be checked regularly, and the car's handbook says how often.
Read-through: the teaching steps
Feel friction
Rub your hands together fast. They get warm – that is friction making heat. Now imagine metal parts rubbing together thousands of times a minute. They would get very hot and wear away. Friction is what oil fights against.
Oil keeps metal apart
Oil is slippery. A very thin layer of it sits between moving parts, such as a piston and its cylinder. The parts slide on the oil instead of rubbing each other. This is called lubrication.
Three jobs of oil
- Lubricate – keep moving parts sliding smoothly
- Cool – carry heat away from hot parts
- Clean – pick up tiny bits of dirt and metal and carry them to the oil filter
The journey of the oil
Oil waits in the sump, a tray at the bottom of the engine. The oil pump sucks it up and pushes it through an oil filter, which catches dirt. Then it travels along tiny passages to the moving parts. Finally it drips back down to the sump, ready to go round again.
Checking the oil
GOV.UK says engine oil is one of the regular checks a driver makes, and the car's handbook says how often. An adult checks the level with the dipstick when the engine is off and cold. If the oil warning light comes on while driving, the driver stops safely and gets help.
Used oil is not for hands
Used engine oil is dirty and can be very hot. HSE (the UK's workplace safety body) warns that frequent skin contact with used engine oil can cause skin problems. Mechanics wear gloves and take old oil to be recycled. Children never touch engine oil.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Marked by Classfern |
| Independent practice (three levels) | 8 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More How cars work lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- GOV.UK – Check your vehicle is safe to drive
- The Highway Code – Annex 6. Vehicle maintenance, safety and security
- HSE – Introduction to safe motor vehicle repair
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.