What gears do: going slow with lots of push, going fast with less – Young Mechanics motor mechanics lesson
Lesson 6 of 40 in the Young Mechanics course (ages 8–11)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Discover how a small gear turning a big gear gives lots of push, how a big gear turning a small one gives speed, and why cars and bicycles need both.
- Time
- 40 minutes + 10 min homework
- Course
- Young Mechanics (ages 8–11)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
A bicycle is a great example. Please hold the bicycle still and keep small fingers away from the chain and gears. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If you were designing a bicycle for a very hilly town, what kind of gears would you give it?”
- Later: the homework, then the practice test.
Watch out for
- Thinking a bigger gear always means going faster. It depends which gear is turning which. A small gear turning a big one gives push and less speed.
- Thinking gears make extra energy. Gears only swap speed for push, or push for speed. They never make energy from nothing.
- Thinking two gears turn the same way. Two gears with locked teeth turn in opposite directions.
Hands-on: Cut two circles from card, one twice as wide as the other. Mark a dot on each. Lay them edge to edge on a table and turn the big one slowly, keeping the edges pressed so the small one turns too (like gears without teeth). Count how many times the small circle turns for one turn of the big one. If you have a bicycle with gears, ask an adult to hold it still while you look at the different-sized gears on the back wheel – look only, and keep fingers away from the chain.
What your child will learn
- I can say what a gear is and how two gears turn each other.
- I can explain that a small gear turning a big gear gives more push but less speed.
- I can work out how many times a gear turns by counting teeth.
- I can say when a car or bicycle uses a low gear and when it uses a high gear.
Key words
- gear
- A wheel with teeth around its edge. The teeth fit into the teeth of another gear so one can turn the other.
- teeth
- The bumps around the edge of a gear that lock into another gear.
- driving gear
- The gear that is turned first, by the engine or by your pedals. It turns the other gear.
- driven gear
- The gear that is turned by the driving gear.
- low gear
- A gear for starting off and climbing hills: slow, with lots of push.
- high gear
- A gear for going fast on a flat road: fast, with less push.
The big ideas
A gear is a wheel with teeth around its edge. When two gears are put together, their teeth lock in, and turning one gear makes the other turn the opposite way.
If a small gear turns a big gear, the big gear turns more slowly – but with a stronger turning push. If a big gear turns a small gear, the small gear spins faster – but with less push. You cannot get more speed and more push at the same time; gears swap one for the other.
A car needs lots of push to start moving and to climb hills, and it needs speed on a fast road. The engine works best in a certain range of speeds, so the transmission gives a choice of gears. Low gears give push, high gears give speed. A bicycle with gears does exactly the same thing for your legs.
Read-through: the teaching steps
Gears with teeth
Look at the two gears in the drawing on the lesson page. Their teeth lock together. When the driving gear turns one way, the driven gear turns the other way. Every tooth that passes on one gear moves one tooth on the other.
Gear ratio = teeth on the driven gear ÷ teeth on the driving gear = 30 ÷ 10 = 3 to 1. Small turning big: slow with push
Imagine a small gear with 10 teeth turning a big gear with 20 teeth. The small gear must turn twice to move all 20 teeth of the big gear. So the big gear turns once for every 2 turns of the small gear.
The big gear turns more slowly, but with about twice the turning push. That is a low gear.
Big turning small: fast with less push
Now swap them. A big gear with 20 teeth turns a small gear with 10 teeth. One turn of the big gear moves 20 teeth, which is 2 whole turns of the small gear. The small gear spins twice as fast, but with less push. That is a high gear.
Gears on a bicycle
On a bicycle, the gear by the pedals is joined by a chain to a gear on the back wheel.
- Climbing a hill: a small front gear and a big back gear – easy pedaling, slow speed
- Racing on the flat: a big front gear and a small back gear – hard pedaling, high speed
The main parts of a bicycle. Gears in a car
A car's transmission has several gears. First gear is a low gear – in a typical car the engine turns about three and a half times for one turn of the transmission output. That gives lots of push to get moving. The top gear lets the car cruise along a fast road while the engine turns calmly. Reverse gear makes the wheels turn the other way.
Keep fingers clear
Gears and chains can trap fingers. Real transmissions are closed metal boxes, and only trained mechanics take them apart. When you look at a bicycle chain, the bicycle must be still and a grown-up must be with you.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
- What gears do: going slow with lots of push, going fast with less test12 questions, graded instantly
More How cars work lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.