From the engine to the wheels – Young Mechanics motor mechanics lesson
Lesson 5 of 40 in the Young Mechanics course (ages 8–11)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Follow the turning force on its journey from the engine, through the clutch, transmission and differential, all the way to the wheels.
- Time
- 40 minutes + 10 min homework
- Course
- Young Mechanics (ages 8–11)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
A toy car and a bit of string are all you need. The drivetrain is hidden under a real car; please do not let children look underneath one. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think many tractors and off-road cars have four-wheel drive?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the engine is joined straight onto the wheels. The turning goes through the clutch, transmission and differential first, so the car can stop, change speed and turn corners.
- Thinking all four wheels are always driven. Most cars drive only two wheels – the front ones or the back ones. The others roll along.
- Thinking both wheels turn at the same speed round a corner. The outside wheel travels further, so it must turn faster. The differential makes this possible.
Hands-on: Tape two pencils to a table to make a curved "road" and roll a toy car round the bend. Tie a piece of string along the path of the inside wheels and another along the outside wheels, then straighten them and compare – the outside string is longer. That is why the differential is needed. Then draw the journey of the turning force as a comic strip: engine, clutch, transmission, shaft, differential, wheels.
What your child will learn
- I can put the parts in order from the engine to the wheels.
- I can say what the clutch, the transmission and the differential each do.
- I can explain the difference between front-wheel drive and rear-wheel drive.
- I can explain why the outside wheel turns faster than the inside wheel on a corner.
Key words
- drivetrain
- All the parts that carry the turning force from the engine to the wheels.
- clutch
- A part that joins the engine to the transmission or lets them come apart, so the car can stop without the engine stopping.
- transmission
- A box of gears that lets the car go slowly with lots of push, or fast with less push.
- driveshaft
- A long spinning shaft that carries the turning force to the rear wheels on a rear-wheel-drive car.
- differential
- A set of gears between two wheels that lets them turn at different speeds when the car goes round a corner.
- axle
- A shaft that a wheel turns on, or that turns the wheel.
The big ideas
The engine makes a turning force at the crankshaft. But the engine sits in one place and the wheels are in the corners of the car, so the turning has to be carried there. All the parts that do this job together are called the drivetrain.
The turning goes from the engine through the clutch, which can join or separate the engine and the transmission. The transmission picks the right gear for going slowly or quickly. Then shafts carry the turning to the differential, a clever set of gears that splits the turning between two wheels. Finally the wheels turn and the tires push against the road.
In a front-wheel-drive car the engine turns the front wheels; in a rear-wheel-drive car it turns the back wheels; and in a four-wheel-drive car it turns all four. Electric cars are simpler: the motor is often right next to the wheels it drives.
Read-through: the teaching steps
The journey in order
Follow the arrows in the drawing on the lesson page:
- Engine – makes the turning force
- Clutch – joins or separates engine and transmission
- Transmission – picks a gear
- Shafts – carry the turning
- Differential – shares it between two wheels
- Wheels – turn and push the car along
How the turning force gets from the engine to the driven wheels (rear-wheel drive shown). The clutch
An engine has to keep turning, even when the car stops at traffic lights. The clutch lets the engine keep running while the wheels stand still. In a car with a manual transmission, the driver presses the clutch pedal to separate the engine from the transmission while changing gear. In an automatic car this is done for the driver.
The transmission
The transmission holds gears of different sizes. Low gears give lots of push for starting off and climbing hills. High gears let the car go fast on a straight road. There is also a reverse gear for going backward.
Shafts
Spinning shafts carry the turning onward. On a rear-wheel-drive car a long driveshaft runs under the middle of the car to the back. On a front-wheel-drive car the engine and transmission are at the front, right next to the wheels they drive, so only short shafts are needed.
The differential
When a car goes round a corner, the outside wheel has further to travel than the inside wheel. So it must turn faster. The differential is a set of gears that lets the two driven wheels turn at different speeds while still both being pushed round.
Which wheels are driven?
- Front-wheel drive – the front wheels are turned by the engine (most small cars)
- Rear-wheel drive – the back wheels are turned
- Four-wheel drive – all four wheels are turned, which helps on mud and snow
The other wheels just roll along.
Spinning parts are dangerous
Shafts under a car spin very fast when the car is moving. That is one reason why mechanics never work under a car that is running, and why children never go under a car at all.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More How cars work lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.