▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Tire tread: why grooves keep a car safe in the rain – Young Mechanics motor mechanics lesson

Lesson 12 of 40 in the Young Mechanics course (ages 8–11)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out how the grooves in a tire push water out of the way so the rubber can grip a wet road, and why worn tread is dangerous.

Time
40 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

If you check your own tires with the penny test, let your child watch from the sidewalk while the car is parked and switched off. NHTSA advises replacing tires at 2/32 of an inch of tread. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think walking boots and football boots have deep grooves on their soles?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking smooth tires grip better because more rubber touches the road. On a dry track that can be true, but on a wet road smooth tires cannot clear water and can lose grip completely.
  • Thinking tread lasts for ever. Tread wears a little on every journey, so tires are checked regularly and replaced in time.
  • Thinking only the middle of the tire matters. The whole tread is checked all the way round; NHTSA advises checking tread regularly.

Hands-on: Press a dry hand flat on a table and slide it – then do the same on a table with a little water on it. Notice how much easier the wet hand slides. Then look at the soles of different shoes: which have deep grooves for wet weather? With an adult, look (without touching) at the tread on a parked car's tires from the sidewalk and compare them with your shoes.

What your child will learn

  • I can explain what tire tread is.
  • I can explain how the grooves clear water so the tire can grip a wet road.
  • I can explain what hydroplaning is and why worn tread makes it more likely.
  • I can say when NHTSA advises replacing a tire: when the tread is worn to 2/32 of an inch.

Key words

tread
The pattern of grooves and blocks on the part of a tire that touches the road.
groove
A channel in the tread that carries water away from under the tire.
tread depth
How deep the grooves are. It gets smaller as the tire wears.
hydroplaning
When a tire rides up on a layer of water and loses its grip on the road.
worn
Rubbed away by use. Worn tread has shallow grooves.

The big ideas

Look closely at a car tire and you will see a pattern of grooves and blocks. This is the tread. On a dry road, the rubber grips well on its own. But on a wet road there is a thin layer of water between the tire and the road, and water is slippery.

The grooves solve this. As the tire rolls, the grooves give the water somewhere to go, squeezing it out to the sides and behind. That lets the rubber blocks press down onto the road and grip. If the grooves are worn shallow, they cannot carry the water away fast enough. The tire can ride up on the water and lose its grip – this is called hydroplaning.

Tread wears down a little every time a car is driven. NHTSA, the US road safety agency, says tires should be replaced when the tread is worn down to 2/32 of an inch. Its penny test is a simple way for an adult to see this.

Read-through: the teaching steps

  1. What tread is

    The tread is the thick rubber on the outside of the tire, the part that touches the road. It is cut into blocks with grooves between them. Look at the tread pattern in the drawing on the lesson page.

    Tread depthreplace at 2/32 inTread wear barTread blockGroove
    Tread depth is measured in the grooves. NHTSA says a tire should be replaced when the tread is worn down to 2/32 of an inch.
  2. Water is slippery

    Try sliding a wet plate across a wet table – it slides easily. A layer of water stops surfaces gripping. On a wet road, a tire has to get rid of that water to grip.

  3. Grooves clear the water

    As the tire rolls, water is pushed into the grooves and squeezed out to the sides and behind. This lets the rubber blocks touch the road and grip. A tire on a wet road can clear a surprising amount of water every second.

  4. Hydroplaning

    If there is too much water, or the grooves are too shallow, the water cannot escape. The tire rides up on top of the water like a surfboard and loses its grip. Steering and braking stop working properly. Driving more slowly in heavy rain helps prevent it.

  5. When to replace a tire

    NHTSA says to replace tires when the tread is worn down to 2/32 of an inch. For the penny test, an adult puts a penny into a groove with Lincoln's head upside down. If the top of his head can be seen, the tread is too shallow and the tire should be replaced.

  6. Checking is for adults

    Tread is checked by an adult or a mechanic with a tread depth gauge, with the car parked and switched off. Children can look at tires from the sidewalk, but never kneel in the road or touch a car.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Wheels, brakes and steering lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.