Tyre tread: why grooves keep a car safe in the rain – Young Mechanics motor mechanics lesson
Lesson 12 of 40 in the Young Mechanics course (ages 8–11)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out how the grooves in a tyre push water out of the way so the rubber can grip a wet road, and why worn tread is dangerous.
- Time
- 40 minutes + 10 min homework
- Course
- Young Mechanics (ages 8–11)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
If you check your own tyres, let your child watch from the pavement while the car is parked and switched off. GOV.UK says the minimum tread on a car is 1.6 mm. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think walking boots and football boots have deep grooves on their soles?”
- Later: the homework, then the practice test.
Watch out for
- Thinking smooth tyres grip better because more rubber touches the road. On a dry track that can be true, but on a wet road smooth tyres cannot clear water and can lose grip completely.
- Thinking tread lasts for ever. Tread wears a little on every journey, so tyres are checked regularly and replaced in time.
- Thinking only the middle of the tyre matters. The law looks at the middle three-quarters of the tread all the way round, and the whole tyre must be in good condition.
Hands-on: Press a dry hand flat on a table and slide it – then do the same on a table with a little water on it. Notice how much easier the wet hand slides. Then look at the soles of different shoes: which have deep grooves for wet weather? With an adult, look (without touching) at the tread on a parked car's tyres from the pavement and compare them with your shoes.
What your child will learn
- I can explain what tyre tread is.
- I can explain how the grooves clear water so the tyre can grip a wet road.
- I can explain what aquaplaning is and why worn tread makes it more likely.
- I can say the smallest tread depth allowed on a car in Great Britain: 1.6 mm.
Key words
- tread
- The pattern of grooves and blocks on the part of a tyre that touches the road.
- groove
- A channel in the tread that carries water away from under the tyre.
- tread depth
- How deep the grooves are. It gets smaller as the tyre wears.
- aquaplaning
- When a tyre rides up on a layer of water and loses its grip on the road.
- worn
- Rubbed away by use. Worn tread has shallow grooves.
The big ideas
Look closely at a car tyre and you will see a pattern of grooves and blocks. This is the tread. On a dry road, the rubber grips well on its own. But on a wet road there is a thin layer of water between the tyre and the road, and water is slippery.
The grooves solve this. As the tyre rolls, the grooves give the water somewhere to go, squeezing it out to the sides and behind. That lets the rubber blocks press down onto the road and grip. If the grooves are worn shallow, they cannot carry the water away fast enough. The tyre can ride up on the water and lose its grip – this is called aquaplaning.
Tread wears down a little every time a car is driven. GOV.UK says the tread on a car tyre must be at least 1.6 mm deep across the middle three-quarters of the tyre and all the way round. Below that, the tyre is not legal and not safe.
Read-through: the teaching steps
What tread is
The tread is the thick rubber on the outside of the tyre, the part that touches the road. It is cut into blocks with grooves between them. Look at the tread pattern in the drawing on the lesson page.
Tread depth is measured in the main grooves. For cars the legal minimum is 1.6 mm across the central three-quarters of the tread, all the way round. Water is slippery
Try sliding a wet plate across a wet table – it slides easily. A layer of water stops surfaces gripping. On a wet road, a tyre has to get rid of that water to grip.
Grooves clear the water
As the tyre rolls, water is pushed into the grooves and squeezed out to the sides and behind. This lets the rubber blocks touch the road and grip. A tyre on a wet road can clear a surprising amount of water every second.
Aquaplaning
If there is too much water, or the grooves are too shallow, the water cannot escape. The tyre rides up on top of the water like a surfboard and loses its grip. Steering and braking stop working properly. Driving more slowly in heavy rain helps prevent it.
The legal limit
GOV.UK says car tyres must have at least 1.6 mm of tread across the middle three-quarters of the tread and all the way round. Motorcycles and large vehicles need at least 1 mm. A new car tyre has much deeper tread than this, so the limit is a small amount left at the end of the tyre's life.
Checking is for adults
Tread is checked by an adult or a mechanic with a tread depth gauge, with the car parked and switched off. Children can look at tyres from the pavement, but never kneel in the road or touch a car.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Wheels, brakes and steering lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.