▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Why wheels are round, and what tires are for – Young Mechanics motor mechanics lesson

Lesson 11 of 40 in the Young Mechanics course (ages 8–11)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out why a round wheel rolls so easily, and the four big jobs a tire does every time a car moves.

Time
35 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Everyday objects show the ideas well. When you look at real tires together, keep the car parked and do not let children kneel in the road or touch the tires. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “What other things in your home or school use wheels to make moving easier?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the whole tire touches the road. Only a small patch at the bottom of each tire touches the road at any moment.
  • Thinking tires are just there to look good. Tires grip, carry the weight, soften bumps and hold the air. A car could not work safely without them.
  • Thinking more air always makes a tire better. Too much air is as bad as too little. Tires need the pressure the handbook gives.

Hands-on: Make a ramp with a book and a tray. Roll a round jar lid down it, then slide a small box down it. Which moves more easily? Next, cut a circle and a square from card, push a pencil through the center of each, and roll them along the edge of a ruler. Watch the pencil: it stays level with the circle but bobs up and down with the square.

What your child will learn

  • I can explain why a round wheel rolls smoothly and a square one would not.
  • I can explain that rolling needs much less force than sliding.
  • I can name four jobs a tire does.
  • I can say that the only parts of a car that touch the road are four small patches of tire.

Key words

wheel
A round part that turns on an axle so a vehicle can roll.
axle
The shaft at the center of a wheel that the wheel turns around.
tire
The rubber ring, filled with air, fitted around a wheel.
grip
How well something holds onto a surface without sliding.
contact patch
The small part of a tire that is touching the road at any moment.
rolling
Moving by turning over and over, like a ball or a wheel.

The big ideas

Wheels are one of the oldest and cleverest inventions. A round wheel has every point on its edge the same distance from its center. So as it rolls, the axle in the middle stays at the same height and the vehicle glides along smoothly. A square wheel would lift the vehicle up and drop it down at every corner – a very bumpy ride.

Rolling is also much easier than sliding. Try pushing a heavy box across the floor, then put it on a skateboard: the wheels make it far easier to move.

Around each car wheel is a tire. Tires have four big jobs: they grip the road so the car can go, stop and turn; they carry the weight of the car; they soften bumps; and they hold the air that keeps them in shape. Amazingly, the only parts of a car that touch the road are four small patches of tire, each about the size of a hand. Everything a car does depends on those four patches.

Read-through: the teaching steps

  1. Why round?

    Every point on the edge of a circle is the same distance from the center. So when a round wheel rolls, its center – the axle – stays at the same height. The car moves smoothly instead of bumping up and down.

  2. Rolling beats sliding

    Sliding a heavy box makes a lot of friction. Putting it on wheels means the wheels roll instead, and rolling needs much less push. Long ago, people moved heavy stones on round logs for the same reason.

  3. Job 1: grip

    Tires are made of rubber that grips the road. Grip lets the car speed up, slow down and go round corners without sliding. The grooves in the tread help the tire keep its grip in the wet.

    Tread depthreplace at 2/32 inTread wear barTread blockGroove
    Tread depth is measured in the grooves. NHTSA says a tire should be replaced when the tread is worn down to 2/32 of an inch.
  4. Jobs 2 and 3: carry and cushion

    Tires carry the whole weight of the car, its people and its luggage. The air inside them squashes a little over bumps, which makes the ride softer.

  5. Job 4: hold the air

    A tire must hold air at the right pressure. Too little air and it squashes flat and grips badly; too much and it bounces and grips badly too. The right pressure is given in the car's handbook.

  6. Four small patches

    At any moment only a small patch of each tire touches the road, about the size of a hand. Four patches – that is all that holds a car on the road. That is why tires must be in good condition.

  7. Reading a tire

    The side of a tire is called the sidewall. It is covered in letters and numbers showing its size and other information. See the drawing on the lesson page. Checking and changing tires is a job for trained adults.

    205 / 55 R 16 91 VWidthin mmSidewall height% of widthRadialRim sizein inchesLoad indexSpeed rating
    Reading a tire size code.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minGraded by Classfern
Independent practice (three levels)8 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Wheels, brakes and steering lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.