▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Suck, squeeze, bang, blow: the four strokes – Young Mechanics motor mechanics lesson

Lesson 4 of 40 in the Young Mechanics course (ages 8–11)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Learn the four strokes every piston repeats in a gasoline engine – suck, squeeze, bang, blow – and why only one of them pushes the car along.

Time
40 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

The nicknames "suck, squeeze, bang, blow" make the order easy to remember. Saying them with actions helps younger children. No real engine is needed or should be touched. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Only one stroke in four does the pushing. Why do you think the engine still runs smoothly?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking every stroke pushes the car. Only the power (bang) stroke pushes. The other three strokes get the cylinder ready or clear it out.
  • Mixing up squeeze and blow, because the piston moves up in both. In squeeze both valves are shut. In blow the exhaust valve is open and gases leave.
  • Thinking a stroke means one full turn of the engine. A stroke is one movement down or up. It takes two strokes for one turn of the crankshaft.

Hands-on: Make four cards and draw a cylinder on each one. On card 1 draw the piston low with an arrow down and write "SUCK". On card 2 draw the piston high, valves shut, and write "SQUEEZE". On card 3 draw a spark and an arrow pushing down and write "BANG". On card 4 draw the piston rising and arrows going out and write "BLOW". Shuffle them and ask someone at home to put them in order. Then say the four words with actions: hands apart (suck), clap them close (squeeze), jump (bang), blow out (blow).

What your child will learn

  • I can name the four strokes in order: intake, compression, power and exhaust.
  • I can match each stroke to its nickname: suck, squeeze, bang, blow.
  • I can say which way the piston moves in each stroke and which valves are open.
  • I can explain that only the power stroke pushes the crankshaft round.

Key words

stroke
One movement of the piston, either all the way down or all the way up the cylinder.
intake stroke
The "suck" stroke: the piston moves down and draws fuel and air in.
compression stroke
The "squeeze" stroke: the piston moves up and squashes the fuel and air.
power stroke
The "bang" stroke: the spark lights the mixture and the hot gas pushes the piston down.
exhaust stroke
The "blow" stroke: the piston moves up and pushes the used gases out.
cycle
One full set of the four strokes, which then starts again.

The big ideas

Most car engines are four-stroke engines. A stroke is one movement of the piston – all the way down the cylinder, or all the way back up. Each piston repeats the same four strokes over and over, very fast. Mechanics remember them with four easy words: suck, squeeze, bang, blow.

Suck: the piston moves down and draws in fuel and air. Squeeze: the piston moves up and squashes the mixture into a small space. Bang: the spark plug lights the squeezed mixture and the hot gas pushes the piston down hard. Blow: the piston moves up again and pushes the used gases out into the exhaust.

Only one stroke in four – the bang – actually pushes the engine round. The other three are carried along by the turning crankshaft and by the other cylinders taking their turns. Then the whole cycle starts again.

Read-through: the teaching steps

  1. 1. Suck (intake)

    The intake valve opens and the piston moves down the cylinder. This makes room, so fuel and air are drawn in, like drawing up water in a syringe. Follow the piston in the drawing on the lesson page.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. 2. Squeeze (compression)

    Both valves close tight. The piston moves back up and squashes the fuel and air into a small space at the top of the cylinder. Squeezed mixture burns much more strongly.

  3. 3. Bang (power)

    The spark plug makes a spark. The squeezed fuel and air burn in a flash and become hot gas. The gas pushes the piston down hard. This is the only stroke that pushes the crankshaft round.

  4. 4. Blow (exhaust)

    The exhaust valve opens and the piston moves back up. It pushes the used gases out of the cylinder and into the exhaust pipe. Then the intake valve opens and it all starts again with "suck".

  5. Two turns for one cycle

    In each stroke the piston goes once down or once up. Down-and-up is one full turn of the crankshaft. Four strokes is two down-and-ups, so one whole cycle takes two turns of the crankshaft.

    • Strokes 1 and 2: first turn
    • Strokes 3 and 4: second turn
  6. A team of cylinders

    In a four-cylinder engine, each cylinder is on a different stroke at any moment. While one is on "bang", the others are on suck, squeeze or blow. So there is always a push coming, and the engine runs smoothly.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More How cars work lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.