▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Recycling a car at the end of its life – Vehicles and Technology motor mechanics lesson

Lesson 47 of 50 in the Vehicles and Technology course (ages 14+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Follow a worn-out car from the road to the recycling yard: what is taken out first, what is hazardous, and how most of the materials get a second life.

Time
40 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

This lesson is for curious learners of 14 and over. It explains the recycling process for understanding only; draining fluids, removing airbags or batteries and handling refrigerant are specialist jobs that must never be tried at home. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Should car makers be responsible for recycling the cars they make when they are worn out? How might that change the way cars are designed?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a scrapped car is simply crushed straight away. Depollution comes first: fluids, battery, airbags and other hazardous parts are removed before crushing.
  • Thinking used engine oil is worn out and can only be thrown away. Oil does not wear out; it gets dirty. Re-refining cleans it so it can be used again.
  • Thinking all old car parts are hazardous. Some are (oil, oil filters, brake fluid, lead-acid batteries, undeployed airbags); others, such as clean steel and tires, are not classed as hazardous, though they still need proper recycling.

Hands-on: Make a 'car recycling flow chart' on a large sheet of paper. Start with 'Car arrives' and add boxes for each stage: check documents, drain fluids, remove hazardous parts, sell reusable parts, crush, shred, sort metals, melt. Beside each stage draw the materials that leave it and where they go next. Use household packaging – a tin can, a plastic bottle, a glass jar – to show which materials can be sorted by a magnet.

What you will learn

  • I can explain what 'end-of-life vehicle' and 'depollution' mean.
  • I can list the hazardous fluids and parts removed before a car is crushed.
  • I can explain why some jobs, such as airbags, refrigerant and high-voltage batteries, need specially trained people.
  • I can work out recycling percentages and amounts from a car's mass.

Key words

end-of-life vehicle (ELV)
A vehicle that is being scrapped because it is worn out, badly damaged or no longer worth repairing.
depollution
Removing fluids and hazardous parts from a vehicle before it is dismantled or crushed.
hazardous waste
Waste that could harm people or the environment, such as used oil, brake fluid and lead-acid batteries, and must be handled under special rules.
re-refining
Cleaning used engine oil so that it can be used again as new lubricating oil.
shredder
A huge machine that tears a crushed car body into fist-sized pieces so that the metals can be sorted.

The big ideas

Every car eventually reaches the end of its life. A car is mostly steel, with aluminum, copper, glass, plastics, rubber and a range of fluids. Handled well, most of it can be reused or recycled; handled badly, the oil, acid and chemicals inside can poison soil and water.

At an auto recycling yard, the first job is depollution: draining the fluids and removing the battery, tires and other hazardous parts. Only then is the car stripped of useful parts, crushed and shredded so that its metals can be sorted and melted down.

The EPA stresses why the fluids matter: used oil from a single oil change can contaminate one million gallons of fresh water – a year's supply for 50 people. Recycled properly, the same oil can be re-refined and used again.

Read-through: the teaching steps

  1. Arriving at the yard

    The car is booked in and its ownership papers checked. Useful parts – engines, doors, lights, wheels – may be sold for reuse, which saves the energy needed to make new ones. Whatever cannot be reused goes on to be depolluted and recycled.

  2. Depollution: the fluids

    Trained staff drain every fluid into separate containers:

    • fuel
    • engine oil and transmission oil
    • brake fluid
    • coolant (antifreeze)
    • washer fluid

    The fluids are kept apart because mixed waste is harder to recycle. Used oil does not wear out – it just gets dirty – so it can be re-refined into new lubricating oil. Spilled gasoline is a serious fire risk, so this work is done with special equipment, away from drains.

  3. Depollution: hazardous parts

    Next come the parts that need special handling:

    • the lead-acid battery (contains acid and lead);
    • oil filters – the EPA says to drain them and recycle them as scrap steel;
    • airbags and seat-belt pretensioners – these contain small explosive charges and are handled only by trained people;
    • air-conditioning refrigerant – recovered with special equipment by certified technicians;
    • on electric and hybrid cars, the high-voltage battery – trained technicians only (up to 650 V DC; cables usually orange).
  4. Tires, glass and plastics

    Tires are removed and can be retreaded, shredded into rubber crumb for sports surfaces and playgrounds, or used as fuel in cement kilns. Glass and some plastics can be separated and recycled, though mixed plastics are one of the hardest parts of a car to recycle. Designers increasingly mark plastic parts with their type so they can be sorted.

  5. Crush, shred and sort

    The stripped shell is flattened and fed into a shredder. Powerful magnets pull out the steel and iron. Other methods separate aluminum, copper and other non-ferrous metals. The metals go to furnaces to be melted and made into new products. What is left – foam, fabric, dust and mixed plastic – is called shredder residue, and engineers are working to recycle more of it.

  6. Safety in the yard

    Dismantling yards are workshops with real hazards: heavy parts, sharp edges, fuel vapor, oil on the skin and moving machines. Workers wear protective equipment such as gloves, eye protection and safety boots, and lifting is done with proper machinery. This is a lesson about how the process works – not something to try on a real car.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Future and environment lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.