▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Recycling a car at the end of its life – Vehicles and Technology motor mechanics lesson

Lesson 47 of 50 in the Vehicles and Technology course (ages 14+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Follow a worn-out car from the road to the recycling yard: what is taken out first, what is hazardous, and how most of the materials get a second life.

Time
40 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

This lesson is for curious learners of 14 and over. It explains the recycling process for understanding only; draining fluids, removing airbags or batteries and handling refrigerant are specialist jobs that must never be tried at home. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Should car makers be responsible for recycling the cars they make when they are worn out? How might that change the way cars are designed?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a scrapped car is simply crushed straight away. Depollution comes first: fluids, battery, airbags and other hazardous parts are removed before crushing.
  • Thinking used engine oil is worn out and can only be thrown away. Oil does not wear out; it gets dirty. Re-refining cleans it so it can be used again.
  • Thinking all old car parts are hazardous. Some are (oil, oil filters, brake fluid, lead-acid batteries, undeployed airbags); others, such as clean steel and tyres, are not classed as hazardous, though they still need proper recycling.

Hands-on: Make a 'car recycling flow chart' on a large sheet of paper. Start with 'Car arrives' and add boxes for each stage: check documents, drain fluids, remove hazardous parts, sell reusable parts, crush, shred, sort metals, melt. Beside each stage draw the materials that leave it and where they go next. Use household packaging – a tin can, a plastic bottle, a glass jar – to show which materials can be sorted by a magnet.

What you will learn

  • I can explain what 'end-of-life vehicle' and 'depollution' mean.
  • I can list the hazardous fluids and parts removed before a car is crushed.
  • I can explain why some jobs, such as airbags, refrigerant and high-voltage batteries, need specially trained people.
  • I can work out recycling percentages and amounts from a car's mass.

Key words

end-of-life vehicle (ELV)
A vehicle that is being scrapped because it is worn out, badly damaged or no longer worth repairing.
depollution
Removing fluids and hazardous parts from a vehicle before it is dismantled or crushed.
hazardous waste
Waste that could harm people or the environment, such as used oil, brake fluid and lead-acid batteries, and must be handled under special rules.
re-refining
Cleaning used engine oil so that it can be used again as new lubricating oil.
shredder
A huge machine that tears a crushed car body into fist-sized pieces so that the metals can be sorted.

The big ideas

Every car eventually reaches the end of its life. A car is mostly steel, with aluminium, copper, glass, plastics, rubber and a range of fluids. Handled well, most of it can be reused or recycled; handled badly, the oil, acid and chemicals inside can poison soil and water.

In the UK, a vehicle must be scrapped at an authorised treatment facility (ATF). GOV.UK says it is illegal to scrap a vehicle anywhere else. For a car, the ATF gives the owner a certificate of destruction within 7 days, which proves the car was handed over for scrap.

The first job at the facility is depollution: draining the fluids and removing the battery, tyres and other hazardous parts. Only then is the car stripped of useful parts, crushed and shredded so that its metals can be sorted and melted down.

Read-through: the teaching steps

  1. Arriving at the yard

    The car is booked in and its documents checked. In the UK the ATF either scraps the vehicle completely or, if it is worth it, repairs and sells it. If the car is scrapped, the owner receives a certificate of destruction. In England and Wales it is illegal to be paid in cash for a scrapped vehicle – payment is by bank transfer or cheque, which makes stolen cars harder to sell for scrap.

  2. Depollution: the fluids

    Trained staff drain every fluid into separate containers:

    • fuel
    • engine oil and gearbox oil
    • brake fluid
    • coolant (antifreeze)
    • screenwash

    The fluids are kept apart because mixed waste is harder to recycle. Used oil does not wear out – it just gets dirty – so it can be re-refined into new lubricating oil. Spilled petrol is a serious fire risk, so this work is done with special equipment, away from drains.

  3. Depollution: hazardous parts

    Next come the parts that need special handling:

    • the lead-acid battery (contains acid and lead);
    • oil filters (full of used oil);
    • airbags and seat-belt pretensioners – these contain small explosive charges; HSE says only trained people should deploy them, and undeployed airbags must never go in ordinary bins;
    • air-conditioning refrigerant – recovered with special equipment by people with the right qualification;
    • on electric and hybrid cars, the high-voltage battery – trained technicians only (up to 650 V DC; cables usually orange).

    Under Environment Agency guidance, oil filters, lead-acid batteries and brake fluid are hazardous wastes.

  4. Tyres, glass and plastics

    Tyres are removed and can be retreaded, shredded into rubber crumb for sports surfaces and playgrounds, or used as fuel in cement kilns. Glass and some plastics can be separated and recycled, though mixed plastics are one of the hardest parts of a car to recycle. Designers increasingly mark plastic parts with their type so they can be sorted.

  5. Crush, shred and sort

    The stripped shell is flattened and fed into a shredder. Powerful magnets pull out the steel and iron. Other methods separate aluminium, copper and other non-ferrous metals. The metals go to furnaces to be melted and made into new products. What is left – foam, fabric, dust and mixed plastic – is called shredder residue, and engineers are working to recycle more of it.

  6. Safety in the yard

    Dismantling yards are workshops with real hazards: heavy parts, sharp edges, fuel vapour, oil on the skin and moving machines. Workers wear protective equipment such as gloves, eye protection and safety boots, and lifting is done with proper machinery. This is a lesson about how the process works – not something to try on a real car.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Future and environment lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.