Disc brakes and drum brakes – Garage Basics motor mechanics lesson
Lesson 27 of 70 in the Garage Basics course (ages 11–16)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Compare the two main kinds of car brake, find out why the front brakes do most of the work, and calculate braking torque.
- Time
- 40 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
The bicycle activity should be done by you, with your child watching from a safe distance. Brake discs and drums on a car can be very hot and must never be touched. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think racing cars all use disc brakes?”
- Later: the homework, then the practice test.
Watch out for
- Thinking drum brakes press shoes inwards onto the outside of the drum. The shoes are inside the drum and press outwards.
- Thinking the front and rear brakes do the same amount of work. Weight shifts forward under braking, so the front brakes do most of the work.
- Forgetting there are two pads on a disc. Pads press on both faces, so the friction from both counts toward the torque.
Hands-on: Spin a bicycle wheel with an adult holding the bicycle upside down on a soft mat. Watch, without touching, how the rim brake pads squeeze the rim, or how disc brake pads squeeze a small rotor, when the adult gently pulls the lever. Keep fingers well away from the spokes, the rotor and the chain. Then draw and label both kinds of car brake.
What your child will learn
- I can name the main parts of a disc brake and a drum brake.
- I can explain why disc brakes cope better with heat.
- I can explain why the front brakes do more of the work.
- I can calculate braking torque from friction force and radius.
Key words
- rotor (disc)
- A flat metal disc that turns with the wheel, often called a brake rotor in the US. Pads squeeze it to slow the wheel.
- pads
- Blocks of friction material held in the caliper that press on both sides of the disc.
- drum
- A metal drum that turns with the wheel. Curved shoes press outwards against its inside.
- shoes
- Curved metal pieces with friction material that press against the inside of a brake drum.
- braking torque
- The turning effect that slows the wheel: friction force × radius at which the friction acts.
The big ideas
Most cars use two kinds of friction brake. A disc brake has a flat disc (often called a rotor) that turns with the wheel. A caliper fixed beside it holds two pads, and when the driver brakes, hydraulic pistons squeeze the pads onto both faces of the rotor. A drum brake has a hollow drum turning with the wheel, with two curved shoes inside. Pistons in a wheel cylinder push the shoes outwards against the drum.
Both turn kinetic energy into heat. Disc brakes are open to the air, so they cool quickly and keep working well when hot. They also shed water fast. Drum brakes are enclosed, which keeps dirt out and makes it easy to build in a parking brake, but they hold heat. That is why most cars have discs at the front, where most of the braking is done, and many smaller cars have drums at the rear.
The front brakes do more work because weight shifts forward when a car slows down. Brakes are safety-critical: inspection and repair are done only by qualified technicians, and in states with safety inspections, such as Virginia, the brakes are checked.
Read-through: the teaching steps
The disc brake
Look at the drawing on the lesson page. The rotor is bolted to the wheel hub and turns with it. The caliper is fixed to the suspension and does not turn. Inside the caliper, one or more pistons push the pads onto the rotor. Many front rotors are vented: two plates with fins between them, so air can flow through and carry heat away.
A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat. The drum brake
Inside the drum, two shoes sit on a fixed backplate. A wheel cylinder with a piston at each end pushes the tops of the shoes apart, against the drum. Springs pull the shoes back when the brake is released. The leading shoe is dragged slightly into the drum as it turns, which adds to its force: a self-helping effect.
Heat and fade
Discs are out in the airflow, so they lose heat fast. Drums trap heat and also expand when hot, so the shoes must move further. On long hard braking, drums fade sooner than discs. Discs also throw off water quickly, which helps in the rain.
Why the front brakes work harder
When a car slows, its weight shifts forward onto the front tires. The front tires can then grip harder and do more of the braking, often around two thirds of it. Front brakes are usually bigger for this reason, and the hydraulic system sends them a larger share of the force.
Braking torque
The friction force between pad and disc acts at a radius from the center of the wheel. The turning effect that slows the wheel is:
braking torque = friction force × radius
A disc brake has two pads, so add the friction from both sides.
The parking brake
The parking brake holds the car still when parked. It may work the rear drums or rear calipers through a cable, or by electric motors.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Brakes, steering and suspension lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.