▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Disc brakes and drum brakes – Garage Basics motor mechanics lesson

Lesson 27 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Compare the two main kinds of car brake, find out why the front brakes do most of the work, and calculate braking torque.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

The bicycle activity should be done by you, with your child watching from a safe distance. Brake discs and drums on a car can be very hot and must never be touched. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think racing cars all use disc brakes?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking drum brakes press shoes inwards onto the outside of the drum. The shoes are inside the drum and press outwards.
  • Thinking the front and rear brakes do the same amount of work. Weight shifts forwards under braking, so the front brakes do most of the work.
  • Forgetting there are two pads on a disc. Pads press on both faces, so the friction from both counts towards the torque.

Hands-on: Spin a bicycle wheel with an adult holding the bicycle upside down on a soft mat. Watch, without touching, how the rim brake pads squeeze the rim, or how disc brake pads squeeze a small disc, when the adult gently pulls the lever. Keep fingers well away from the spokes, the disc and the chain. Then draw and label both kinds of car brake.

What your child will learn

  • I can name the main parts of a disc brake and a drum brake.
  • I can explain why disc brakes cope better with heat.
  • I can explain why the front brakes do more of the work.
  • I can calculate braking torque from friction force and radius.

Key words

disc
A flat metal disc that turns with the wheel. Pads squeeze it to slow the wheel.
pads
Blocks of friction material held in the caliper that press on both sides of the disc.
drum
A metal drum that turns with the wheel. Curved shoes press outwards against its inside.
shoes
Curved metal pieces with friction material that press against the inside of a brake drum.
braking torque
The turning effect that slows the wheel: friction force × radius at which the friction acts.

The big ideas

Most cars use two kinds of friction brake. A disc brake has a flat disc that turns with the wheel. A caliper fixed beside it holds two pads, and when the driver brakes, hydraulic pistons squeeze the pads onto both faces of the disc. A drum brake has a hollow drum turning with the wheel, with two curved shoes inside. Pistons in a wheel cylinder push the shoes outwards against the drum.

Both turn kinetic energy into heat. Disc brakes are open to the air, so they cool quickly and keep working well when hot. They also shed water fast. Drum brakes are enclosed, which keeps dirt out and makes it easy to build in a parking brake, but they hold heat. That is why most cars have discs at the front, where most of the braking is done, and many smaller cars have drums at the rear.

The front brakes do more work because weight shifts forwards when a car slows down. Brakes are safety-critical: inspection and repair are done only by qualified technicians, and in the UK they are checked at every MOT.

Read-through: the teaching steps

  1. The disc brake

    Look at the drawing on the lesson page. The disc is bolted to the wheel hub and turns with it. The caliper is fixed to the suspension and does not turn. Inside the caliper, one or more pistons push the pads onto the disc. Many front discs are vented: two plates with fins between them, so air can flow through and carry heat away.

    CaliperBrake discFluidPistonPadsDisc (edge on)
    A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat.
  2. The drum brake

    Inside the drum, two shoes sit on a fixed backplate. A wheel cylinder with a piston at each end pushes the tops of the shoes apart, against the drum. Springs pull the shoes back when the brake is released. The leading shoe is dragged slightly into the drum as it turns, which adds to its force: a self-helping effect.

  3. Heat and fade

    Discs are out in the airflow, so they lose heat fast. Drums trap heat and also expand when hot, so the shoes must move further. On long hard braking, drums fade sooner than discs. Discs also throw off water quickly, which helps in the rain.

  4. Why the front brakes work harder

    When a car slows, its weight shifts forwards onto the front tyres. The front tyres can then grip harder and do more of the braking, often around two thirds of it. Front brakes are usually bigger for this reason, and the hydraulic system sends them a larger share of the force.

  5. Braking torque

    The friction force between pad and disc acts at a radius from the centre of the wheel. The turning effect that slows the wheel is:

    braking torque = friction force × radius

    A disc brake has two pads, so add the friction from both sides.

  6. The parking brake

    The parking brake (handbrake) holds the car still when parked. It may work the rear drums or rear calipers through a cable, or by electric motors. In the UK, the MOT inspection manual has separate sections for the service brake, the secondary brake and the parking brake.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Brakes, steering and suspension lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.