▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Burning fuel: the chemistry of combustion – Garage Basics motor mechanics lesson

Lesson 7 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out what really happens when fuel burns in an engine: the reactants, the products, why the mixture of air and fuel matters, and where the harmful exhaust gases come from.

Time
45 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

This lesson links closely to GCSE chemistry. The atom models need only modeling clay or paper; no flames or chemicals are used. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “If burning fuel always makes carbon dioxide, what are the ways engineers can reduce the carbon dioxide from road transport?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the nitrogen in air burns with the fuel. Nitrogen does not burn the fuel; only oxygen does. But at high temperatures a little nitrogen reacts with oxygen to make nitrogen oxides.
  • Thinking the 14.7:1 ratio is by volume. It is by mass: 14.7 kg of air for 1 kg of fuel.
  • Thinking carbon monoxide is safe because you cannot see or smell it. It is poisonous and odorless. That is why engines must never run in closed spaces.

Hands-on: Use colored modeling clay or paper circles for atoms: black for carbon, white for hydrogen, red for oxygen. Build one methane molecule (CH₄) and two oxygen molecules (O₂), then take them apart and rebuild them as one carbon dioxide (CO₂) and two water molecules (H₂O). Check that no atoms are left over. No burning is needed.

What your child will learn

  • I can write a word equation for the complete combustion of a hydrocarbon fuel.
  • I can explain the difference between complete and incomplete combustion.
  • I can explain where nitrogen oxides in exhaust gas come from.
  • I can use the air-fuel ratio to calculate the mass of air needed to burn some fuel.

Key words

hydrocarbon
A compound made of hydrogen and carbon only. Gasoline and diesel are mixtures of hydrocarbons.
combustion
Burning: a reaction in which a fuel reacts with oxygen and releases energy as heat.
complete combustion
Burning with plenty of oxygen. A hydrocarbon gives carbon dioxide and water.
incomplete combustion
Burning without enough oxygen. It also makes carbon monoxide and soot (carbon).
air-fuel ratio
The mass of air compared with the mass of fuel in the mixture.
exothermic
A reaction that gives out energy to the surroundings, usually as heat.

The big ideas

Gasoline and diesel are mixtures of hydrocarbons – molecules made of carbon and hydrogen atoms. When a hydrocarbon burns, it reacts with oxygen from the air. The reaction is exothermic: it releases a lot of energy as heat. In an engine, that heat makes the gases in the cylinder expand and push the piston.

With enough oxygen, the products are carbon dioxide and water (as steam). This is complete combustion:

hydrocarbon + oxygen → carbon dioxide + water.

If there is not enough oxygen, combustion is incomplete, and some carbon ends up as poisonous carbon monoxide or as soot. Air is about four-fifths nitrogen. At the very high temperatures in an engine, some nitrogen reacts with oxygen to form nitrogen oxides, which are harmful pollutants. That is why engines carefully control the mixture and why exhausts have catalytic converters. Carbon monoxide has no smell and can kill, which is one reason an engine must never be run in a closed space.

Read-through: the teaching steps

  1. Fuel and oxygen

    Air is about 78% nitrogen and 21% oxygen, with small amounts of other gases. Only the oxygen takes part in burning the fuel. The fuel is a hydrocarbon such as octane, C₈H₁₈, which is one of the molecules in gasoline. Combustion happens on the power stroke shown in the drawing on the lesson page.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. Complete combustion

    With plenty of oxygen:

    hydrocarbon + oxygen → carbon dioxide + water

    For octane the balanced symbol equation is: 2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O

    Count the atoms: 16 carbon, 36 hydrogen and 50 oxygen on each side. Atoms are rearranged, never created or destroyed.

  3. Incomplete combustion

    When there is not enough oxygen, some carbon atoms only get one oxygen atom, making carbon monoxide (CO), and some get none, making soot (C). Carbon monoxide is poisonous because it stops blood carrying oxygen. Incomplete combustion also wastes energy, because the fuel is not fully burned.

  4. Nitrogen oxides

    Nitrogen in air does not usually react. But at the very high temperatures of combustion, some nitrogen and oxygen combine to make nitrogen oxides (often written NOx). They harm people's lungs and help form smog and acid rain. Exhaust systems are designed to change them back into nitrogen.

  5. The air-fuel ratio

    For a gasoline engine to burn its fuel completely, it needs about 14.7 kg of air for every 1 kg of fuel. This is the chemically correct (stoichiometric) ratio, written 14.7:1. A mixture with less air is called rich; one with more air is called lean. The engine's electronic control module adjusts the fuel to keep close to the right ratio.

  6. Energy in, energy out

    Combustion is exothermic. The chemical energy stored in the fuel becomes heat in the cylinder. Only part of that heat is turned into movement; much is carried away by the exhaust and the cooling system. A later lesson looks at where the energy goes.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.