Burning fuel: the chemistry of combustion – Garage Basics motor mechanics lesson
Lesson 7 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out what really happens when fuel burns in an engine: the reactants, the products, why the mixture of air and fuel matters, and where the harmful exhaust gases come from.
- Time
- 45 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
This lesson links closely to GCSE chemistry. The atom models need only modelling clay or paper; no flames or chemicals are used. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If burning fuel always makes carbon dioxide, what are the ways engineers can reduce the carbon dioxide from road transport?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the nitrogen in air burns with the fuel. Nitrogen does not burn the fuel; only oxygen does. But at high temperatures a little nitrogen reacts with oxygen to make nitrogen oxides.
- Thinking the 14.7:1 ratio is by volume. It is by mass: 14.7 kg of air for 1 kg of fuel.
- Thinking carbon monoxide is safe because you cannot see or smell it. It is poisonous and odourless. That is why engines must never run in closed spaces.
Hands-on: Use coloured modelling clay or paper circles for atoms: black for carbon, white for hydrogen, red for oxygen. Build one methane molecule (CH₄) and two oxygen molecules (O₂), then take them apart and rebuild them as one carbon dioxide (CO₂) and two water molecules (H₂O). Check that no atoms are left over. No burning is needed.
What your child will learn
- I can write a word equation for the complete combustion of a hydrocarbon fuel.
- I can explain the difference between complete and incomplete combustion.
- I can explain where nitrogen oxides in exhaust gas come from.
- I can use the air-fuel ratio to calculate the mass of air needed to burn some fuel.
Key words
- hydrocarbon
- A compound made of hydrogen and carbon only. Petrol and diesel are mixtures of hydrocarbons.
- combustion
- Burning: a reaction in which a fuel reacts with oxygen and releases energy as heat.
- complete combustion
- Burning with plenty of oxygen. A hydrocarbon gives carbon dioxide and water.
- incomplete combustion
- Burning without enough oxygen. It also makes carbon monoxide and soot (carbon).
- air-fuel ratio
- The mass of air compared with the mass of fuel in the mixture.
- exothermic
- A reaction that gives out energy to the surroundings, usually as heat.
The big ideas
Petrol and diesel are mixtures of hydrocarbons – molecules made of carbon and hydrogen atoms. When a hydrocarbon burns, it reacts with oxygen from the air. The reaction is exothermic: it releases a lot of energy as heat. In an engine, that heat makes the gases in the cylinder expand and push the piston.
With enough oxygen, the products are carbon dioxide and water (as steam). This is complete combustion:
hydrocarbon + oxygen → carbon dioxide + water.
If there is not enough oxygen, combustion is incomplete, and some carbon ends up as poisonous carbon monoxide or as soot. Air is about four-fifths nitrogen. At the very high temperatures in an engine, some nitrogen reacts with oxygen to form nitrogen oxides, which are harmful pollutants. That is why engines carefully control the mixture and why exhausts have catalytic converters. Carbon monoxide has no smell and can kill, which is one reason an engine must never be run in a closed space.
Read-through: the teaching steps
Fuel and oxygen
Air is about 78% nitrogen and 21% oxygen, with small amounts of other gases. Only the oxygen takes part in burning the fuel. The fuel is a hydrocarbon such as octane, C₈H₁₈, which is one of the molecules in petrol. Combustion happens on the power stroke shown in the drawing on the lesson page.
The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes. Complete combustion
With plenty of oxygen:
hydrocarbon + oxygen → carbon dioxide + water
For octane the balanced symbol equation is: 2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
Count the atoms: 16 carbon, 36 hydrogen and 50 oxygen on each side. Atoms are rearranged, never created or destroyed.
Incomplete combustion
When there is not enough oxygen, some carbon atoms only get one oxygen atom, making carbon monoxide (CO), and some get none, making soot (C). Carbon monoxide is poisonous because it stops blood carrying oxygen. Incomplete combustion also wastes energy, because the fuel is not fully burned.
Nitrogen oxides
Nitrogen in air does not usually react. But at the very high temperatures of combustion, some nitrogen and oxygen combine to make nitrogen oxides (often written NOx). They harm people's lungs and help form smog and acid rain. Exhaust systems are designed to change them back into nitrogen.
The air-fuel ratio
For a petrol engine to burn its fuel completely, it needs about 14.7 kg of air for every 1 kg of fuel. This is the chemically correct (stoichiometric) ratio, written 14.7:1. A mixture with less air is called rich; one with more air is called lean. The engine's electronic control module adjusts the fuel to keep close to the right ratio.
Energy in, energy out
Combustion is exothermic. The chemical energy stored in the fuel becomes heat in the cylinder. Only part of that heat is turned into movement; much is carried away by the exhaust and the cooling system. A later lesson looks at where the energy goes.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.