▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Anti-lock brakes (ABS): the idea – Garage Basics motor mechanics lesson

Lesson 29 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out why a locked, skidding wheel is a problem, how anti-lock brakes sense it and release the pressure many times a second, and what ABS can and cannot do.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

The toy car activity shows how a locked wheel slides. No real vehicle is involved; brakes and ABS are safety-critical and are worked on only by qualified technicians. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think it matters so much that a driver can still steer while braking hard?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking ABS always makes a car stop in a shorter distance. Its main job is to keep steering control. On some surfaces, such as loose gravel or snow, stopping can even take a little longer.
  • Thinking a pulsing brake pedal means the brakes are broken. Pulsing during hard braking is ABS working normally.
  • Thinking ABS gives grip on ice. ABS can only use the grip that is there. On ice, grip is very low with or without ABS.

Hands-on: Slide a toy car with rubber tires across a smooth table in two ways: once rolling freely, and once with a strip of sticky tape wrapped round its wheels so they cannot turn. Give it the same gentle push each time. Then try to steer each one by pushing gently on the side of the front as it moves. Which one keeps going in a straight line whatever you do?

What your child will learn

  • I can explain why a locked wheel loses steering and usually grip.
  • I can name the parts of an ABS system and say what each does.
  • I can calculate wheel slip as a percentage.
  • I can explain what ABS does and does not do for stopping distance.

Key words

ABS
Anti-lock braking system: it stops the wheels locking under hard braking.
wheel speed sensor
A sensor at each wheel that measures how fast the wheel is turning.
modulator
The ABS unit with valves and a pump that can lower, hold and raise the brake pressure to each wheel.
wheel slip
How much slower a braked wheel turns than it would if it were rolling freely, as a percentage. A locked wheel has 100% slip.
ECU
Electronic control unit: the small computer that reads the sensors and controls the modulator.

The big ideas

If a driver brakes too hard, a wheel can stop turning while the car is still moving. The tire then slides over the road. A sliding tire usually grips less than one that is still rolling at the edge of grip, and, worse, a locked front wheel cannot steer the car.

Anti-lock brakes (ABS) prevent this. A sensor at each wheel tells an electronic control unit how fast that wheel is turning. If one wheel slows much faster than the car could possibly slow, the unit knows it is about to lock. Valves in the ABS modulator then reduce the brake pressure to that wheel for a moment, let it speed up, and apply the pressure again. This happens many times a second, so the driver feels the pedal pulse.

ABS keeps the wheels turning so the driver can still steer while braking hard. It does not always shorten the stopping distance; on loose gravel or snow it can even make it a little longer.

Read-through: the teaching steps

  1. Why locked wheels are bad

    A rolling tire grips the road where it touches. A locked tire slides. Sliding friction is usually lower than the best rolling grip, so the car slows less. And a sliding front tire cannot change the car's direction, so turning the steering wheel does nothing.

  2. Wheel speed sensors

    Each wheel has a toothed ring (or magnetic ring) that turns with it and a sensor that counts the teeth going past. The faster the wheel turns, the more pulses per second. The same sensors are used by other systems, such as traction control and the speedometer.

  3. The control unit decides

    The ECU compares the wheel speeds with each other and with how fast the car is slowing. A wheel that suddenly slows much faster than the others is about to lock. The ECU acts within a few thousandths of a second.

  4. Release, hold, reapply

    The modulator has valves for each wheel. To stop a wheel locking it:

    • holds the pressure steady,
    • lowers it so the wheel speeds up again,
    • then raises it again.

    This cycle repeats many times a second. The driver feels it as a rapid pulsing in the pedal, which is normal.

  5. Wheel slip

    Wheel slip (%) = (car speed − wheel speed) ÷ car speed × 100, with the wheel speed measured at the tire's edge. A freely rolling wheel has 0% slip; a locked wheel has 100%. Most tires grip best at a small amount of slip, often around 10–20%, and ABS works to keep the wheels near this range.

  6. What ABS does not do

    ABS cannot add grip that the tires and road do not have. On ice the car still needs a very long distance to stop. Drivers should follow the advice in the vehicle owner's manual. If the ABS warning light stays on, the system should be checked by a qualified technician.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Brakes, steering and suspension lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

About this lesson

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.