Altitude types: indicated, pressure, density, true and absolute; flight levels – Private Pilot Theory aviation lesson
Lesson 216 of 228 in the Private Pilot Theory course (ages 16+)
US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version
Untangle the five kinds of altitude in the handbook and see how flight levels work in the UK and US.
- Time
- 45 minutes + 10 min homework
- Course
- Private Pilot Theory (ages 16+)
- You need
- Paper, a pencil and this page
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test. Rules and values on this page are given as of November 2026. Always check the current official source (the FAA) before relying on them.
How to use this lesson
This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think flight levels use a standard setting rather than local pressure?”
- Later: the homework, then the practice test.
Watch out for
- Mixing up true and absolute altitude. True is above sea level; absolute is above the ground.
- Thinking flight levels are true altitudes. They are pressure altitudes on the standard setting.
- Assuming UK and US flight levels start at the same height. US from 18,000 ft; UK generally above 3,000 ft.
Hands-on: Draw a side view of a hill. Mark sea level, the hilltop height and an aircraft above it. Label true altitude, absolute altitude and terrain elevation.
What you will learn
- I can define indicated, pressure, density, true and absolute altitude.
- I can explain what a flight level is.
- I can convert a flight level to a pressure altitude.
- I can state where flight levels begin in the UK and US (as of November 2026).
- I can calculate absolute altitude from true altitude and terrain.
Key words
- indicated altitude
- What the altimeter reads with the current setting.
- true altitude
- Actual height above mean sea level.
- absolute altitude
- Height above the ground.
- pressure altitude
- Altitude read with 29.92 inHg set.
- flight level
- Pressure altitude in hundreds of feet: FL250 = 25,000 ft on the standard setting.
The big ideas
The PHAK (chapter 8) lists five altitudes. Indicated altitude is what the altimeter reads with the current setting. True altitude is the actual height above mean sea level. Absolute altitude is height above the ground. Pressure altitude is read with 29.92 inHg set. Density altitude is pressure altitude corrected for nonstandard temperature.
A flight level is pressure altitude in hundreds of feet: 14 CFR 1.1 defines a flight level as a level of constant pressure related to 29.92 inHg, so FL250 is an indication of 25,000 ft and FL255 is 25,500 ft. 14 CFR 91.121 says the altimeter is set to 29.92 at or above 18,000 ft MSL. In the UK, flight levels begin much lower, above a transition altitude of 3,000 ft outside controlled airspace. Both as of November 2026.
This lesson is for understanding only.
Read-through: the teaching steps
Indicated and true
Indicated: the altimeter reading. True: actual height above mean sea level (they differ with temperature and setting errors).
The International Standard Atmosphere (ISA) – a reference, not the real weather on any day. Absolute
Height above the ground = true altitude − terrain elevation.
Pressure and density
Pressure altitude: with 29.92 inHg set. Density altitude: pressure altitude corrected for temperature.
Flight levels
FL = pressure altitude ÷ 100. FL065 = 6,500 ft on the standard setting.
US: 18,000 ft
91.121: below 18,000 ft MSL, the setting of a station within 100 NM along the route; at or above 18,000 ft, 29.92.
Try it: the altimeter
Move the controls and watch the instruments, then try reading them.
Try the real thing: FAA Pilot’s Handbook of Aeronautical Knowledge, chapter 8: flight instruments (free PDF) (opens in a new tab).
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Navigation lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
- FAA Pilot's Handbook of Aeronautical Knowledge FAA-H-8083-25C
- UK CAA Skyway Code
- 14 CFR Part 91 General operating and flight rules
Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.