▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Altitude types: indicated, pressure, density, true and absolute; flight levels – Private Pilot Theory aviation lesson

Lesson 216 of 228 in the Private Pilot Theory course (ages 16+)

UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version

Untangle the five kinds of altitude in the handbook and see how flight levels work in the UK and US.

Time
45 minutes + 10 min homework
Course
Private Pilot Theory (ages 16+)
You need
Paper, a pencil and this page
Marked
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams. Rules and values on this page are given as of November 2026. Always check the current official source (the UK CAA) before relying on them.

How to use this lesson

This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think flight levels use a standard setting rather than local pressure?”
  4. Later: the homework, then the practice test.

Watch out for

  • Mixing up true and absolute altitude. True is above sea level; absolute is above the ground.
  • Thinking flight levels are true altitudes. They are pressure altitudes on the standard setting.
  • Assuming UK and US flight levels start at the same height. UK transition altitude is generally 3,000 ft; US uses 29.92 from 18,000 ft.

Hands-on: Draw a side view of a hill. Mark sea level, the hilltop height and an aircraft above it. Label true altitude, absolute altitude and terrain elevation.

What you will learn

  • I can define indicated, pressure, density, true and absolute altitude.
  • I can explain what a flight level is.
  • I can convert a flight level to a pressure altitude.
  • I can state where flight levels begin in the UK and US (as of November 2026).
  • I can calculate absolute altitude from true altitude and terrain.

Key words

indicated altitude
What the altimeter reads with the current setting.
true altitude
Actual height above mean sea level.
absolute altitude
Height above the ground.
pressure altitude
Altitude read with 1013 hPa set.
flight level
Pressure altitude in hundreds of feet: FL250 = 25,000 ft on the standard setting.

The big ideas

The PHAK (chapter 8) lists five altitudes. Indicated altitude is what the altimeter reads with the current setting. True altitude is the actual height above mean sea level. Absolute altitude is height above the ground. Pressure altitude is read with the standard setting. Density altitude is pressure altitude corrected for non-standard temperature.

A flight level is pressure altitude in hundreds of feet: 14 CFR 1.1 gives FL250 as an indication of 25,000 ft with the standard setting, and FL255 as 25,500 ft. In the UK the Skyway Code says the transition altitude is 3,000 ft outside controlled airspace (often 5,000 or 6,000 ft within or below it), with flight levels on 1013 hPa above it. In the US, 14 CFR 91.121 says 29.92 inHg is set at or above 18,000 ft MSL. Both as of November 2026.

This lesson is for understanding only.

Read-through: the teaching steps

  1. Indicated and true

    Indicated: the altimeter reading. True: actual height above mean sea level (they differ with temperature and setting errors).

    0 ft15 °C5,000 ft5 °C10,000 ft−5 °CSea level pressure 1013.25 hPaAir column
    The International Standard Atmosphere (ISA) – a reference, not the real weather on any day.
  2. Absolute

    Height above the ground = true altitude − terrain elevation.

  3. Pressure and density

    Pressure altitude: with 1013 hPa set. Density altitude: pressure altitude corrected for temperature.

  4. Flight levels

    FL = pressure altitude ÷ 100. FL065 = 6,500 ft on the standard setting.

  5. UK transition altitude

    Skyway Code: 3,000 ft outside controlled airspace (often 5,000–6,000 ft within/below it). Above it, flight levels on 1013 hPa; the lowest VFR flight level is normally FL35.

Try it: the altimeter

Move the controls and watch the instruments, then try reading them.

Try the real thing: CAA Skyway Code (CAP 1535) (opens in a new tab).

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Navigation lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.