▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Electric bicycles: motors, batteries and limits – Vehicles and Technology motor mechanics lesson

Lesson 28 of 50 in the Vehicles and Technology course (ages 14+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how electric bicycles assist the rider, how battery capacity sets range, and the UK rules that decide whether a machine is an electric bicycle or a moped.

Time
45 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

All rule values here come from GOV.UK as of November 2026; check GOV.UK for the current rules. Please make sure e-bike batteries are charged only with their own charger. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Should e-bikes be allowed to go faster than they are now? What would be the benefits and the risks?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking an e-bike does all the work. Most e-bikes assist only while the rider pedals, and assistance stops at the legal speed.
  • Thinking a bigger voltage alone means a bigger range. Range depends on stored energy, volts × amp-hours, and on how the bike is ridden.
  • Thinking any electric bike can be ridden like a bicycle. In GB only machines meeting the EAPC rules can; others count as motorcycles or mopeds and need the right licence, registration and insurance.

Hands-on: Find the label on an e-bike battery or in a shop listing (with an adult) and write down the volts and amp-hours. Work out the watt-hours and estimate a range at 12 Wh per mile. Then make a poster of the GB EAPC rules: 250 W, 15.5 mph, age 14. Look only – do not touch the battery, its charger or its connections.

What you will learn

  • I can explain how pedal assist works using sensors and a controller.
  • I can compare hub motors and mid-drive motors.
  • I can calculate battery energy in watt-hours and estimate range.
  • I can state the UK rules for an electrically assisted pedal cycle (EAPC).
  • I can explain why e-bike batteries must be charged and stored with care.

Key words

pedal assist
A system in which the motor helps only while the rider pedals.
hub motor
An electric motor built into the front or rear wheel hub.
mid-drive
A motor at the cranks that drives through the bicycle's chain and gears.
watt-hour (Wh)
A unit of stored energy: one watt for one hour. Battery Wh = volts × amp-hours.
controller
The electronics that decide how much power the motor gets.
EAPC
Electrically assisted pedal cycle – an e-bike that meets the GB rules and can be ridden like a bicycle.

The big ideas

An electric bicycle is a bicycle with a battery, an electric motor and a controller. Most help the rider only while they pedal: sensors tell the controller how fast or how hard the rider is pedalling, and the controller adds motor power to match. Riding feels like having a strong tailwind.

In Great Britain the law decides what counts as an electric bicycle. GOV.UK says (as of November 2026) that an electrically assisted pedal cycle (EAPC) has a motor with a continuous rated power of no more than 250 W, and the motor must not push the bike above 15.5 mph. Riders must be 14 or over, and a compliant EAPC needs no licence, registration, tax or insurance. A bike that can be ridden with a twist-and-go throttle without pedalling needs vehicle approval; otherwise it is classed as a motorcycle or moped.

The battery is usually a lithium-ion pack. It stores a lot of energy in a small space, so it must be charged with the right charger and kept away from damage. Work on e-bike batteries and electrics is for a qualified bicycle mechanic.

Read-through: the teaching steps

  1. The parts

    • Battery: usually lithium-ion, often 36 V, on the frame or rack
    • Motor: in a wheel hub or at the cranks
    • Controller: the electronics that set motor power
    • Sensors: measure pedalling speed (cadence) or pedalling force (torque)
    • Display: shows assist level, speed and battery charge

    The electric vehicle drawing on the lesson page shows the same battery–controller–motor idea on a larger scale.

    Traction battery pack (under the floor)Electric traction motorPower electronicsCharge port
    The main parts of a battery electric car. High-voltage parts (usually with orange cables) are for trained technicians only.
  2. Hub motor or mid-drive?

    A hub motor sits in the front or rear wheel and drives it directly: simple and cheap, but it adds weight to the wheel and cannot use the bike's gears. A mid-drive motor sits at the cranks and drives through the chain, so it benefits from the gears on hills and keeps the weight low and central, though it wears the chain and sprockets faster.

  3. Cadence and torque sensors

    A cadence sensor notices that the pedals are turning and switches on assistance. A torque sensor measures how hard the rider pushes and adds power in proportion, which feels more natural. The controller cuts the assistance at the legal speed limit.

  4. Battery energy and range

    Battery energy (Wh) = voltage (V) × capacity (Ah)

    A 36 V, 14 Ah battery stores 36 × 14 = 504 Wh. If riding uses about 12 Wh per mile with assistance, the range is about 504 ÷ 12 = 42 miles. Real range depends on hills, wind, rider weight, tyre pressure and the assist level.

  5. GB rules for EAPCs

    As of November 2026, GOV.UK says an EAPC:

    • Has pedals that can be used to propel it
    • Has a motor with a continuous rated power of no more than 250 W
    • Must not be propelled by the motor above 15.5 mph
    • May be ridden by people aged 14 or over, with no licence, registration, tax or insurance needed

    A twist-and-go bike that runs without pedalling needs vehicle approval; otherwise it is a motorcycle or moped in law.

  6. Battery safety

    Lithium-ion batteries store a lot of energy. A damaged, crushed or wet battery, or one charged with the wrong charger, can overheat and catch fire. Batteries are charged with the charger made for them, never left damaged, and never opened. Battery and wiring work is for a qualified bicycle mechanic.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Bicycles lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.