Springs: coil, leaf, torsion bar and air – Motor Vehicle Theory motor mechanics lesson
Lesson 78 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Compare the four main kinds of suspension spring, learn what spring rate means, and use it to work out how far a spring compresses and how fast a car bounces.
- Time
- 45 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
The calculations use spring rate, deflection and the formula for the natural frequency of a mass on a spring. Compressed road springs store a great deal of energy: this lesson is theory only. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “An empty van rides harshly but feels fine when fully loaded. Using what you know about spring rate and natural frequency, explain why.”
- Later: the homework, then the practice test.
Watch out for
- Thinking a stiffer spring is always safer. A spring that is too stiff lets the tyre skip over bumps and lose grip. The rate is chosen to balance comfort, grip and load.
- Thinking the spring stops the car bouncing. A spring stores and returns energy, so on its own it keeps bouncing. The damper turns that energy into heat.
- Thinking a coil spring works by bending. The wire of a coil spring mainly twists as the coil is compressed, which is why it behaves like a wound-up torsion bar.
Hands-on: Hang a small weight (such as a bag of rice) from a rubber band or a long spring from a hardware shop, fixed to a table edge. Measure how far it stretches with one bag and with two, and work out the rate in N per mm (1 kg ≈ 10 N). Then pull the weight down gently, let go, and count the bounces in 10 seconds to find its frequency. Never try to compress or remove a spring from a real vehicle: they store enough energy to cause serious injury.
What you will learn
- I can explain what a suspension spring does and the difference between sprung and unsprung mass.
- I can describe how coil, leaf, torsion bar and air springs store energy.
- I can calculate spring rate, deflection and the natural frequency of a corner of a car.
- I can explain why compressed springs are dangerous and are handled only by trained technicians.
Key words
- spring rate
- The force needed to compress a spring by one unit of length, for example newtons per millimetre (N/mm).
- sprung mass
- The part of the vehicle's mass carried by the springs: the body, engine, passengers and load.
- unsprung mass
- The mass not carried by the springs: wheels, tyres, brakes, hubs and part of the suspension arms.
- progressive spring
- A spring whose rate rises as it is compressed, so it is soft over small bumps and firmer over big ones.
- natural frequency
- The number of times per second a mass on a spring bounces up and down if it is disturbed and left alone.
The big ideas
Every road has bumps. Without springs, each bump would throw the whole car upwards, the tyres would leave the road and the people inside would be shaken about. A suspension spring lets the wheel move up and down while the body stays much steadier. It stores the energy of the bump and gives it back.
There are four main types. A coil spring is a steel bar wound into a helix. A leaf spring is a stack of curved steel strips. A torsion bar is a straight steel bar that twists. An air spring is a strong rubber bag filled with compressed air. All of them follow the same idea: the more they are deflected, the more force they push back with.
A spring alone would keep bouncing, so each spring works with a damper, covered in the next lesson. A suspension spring holding up a car stores a great deal of energy: removing or compressing one is dangerous work for trained technicians with the correct equipment only.
Read-through: the teaching steps
What springs do
Springs carry the weight of the car and let each wheel follow the road. The body, engine, people and load are the sprung mass. The wheels, tyres, brakes and hubs are the unsprung mass.
The lighter the unsprung mass compared with the sprung mass, the better: a light wheel can follow bumps quickly while the heavy body hardly moves.
Spring rate
Spring rate is force ÷ deflection. A spring that needs 2,500 N to compress it by 100 mm has a rate of 25 N/mm.
For a simple spring the rate stays the same through its travel (a linear spring), so twice the force gives twice the deflection. A progressive spring – for example a coil with its turns closer together at one end – gets firmer as it is compressed.
Coil springs and torsion bars
A coil spring is a steel rod wound into a helix. When it is compressed, the steel in the rod is actually twisted, so a coil spring is really a torsion bar wound up into a compact shape. Coil springs are light and compact, and are used on most cars, often around a damper.
A torsion bar is a straight steel bar fixed at one end and twisted by a suspension arm at the other. It takes up little space and on some vehicles the ride height can be set by changing the angle at the fixed end.
Leaf springs
A leaf spring is a stack of curved steel leaves clamped together, fixed to the body at each end and to the axle in the middle. As well as springing the vehicle, it locates the axle, so no extra arms are needed. That makes it simple and strong, so it is common on vans, pick-ups and lorries.
The leaves rub on each other as the spring flexes. That friction gives some damping but also a harsher ride. The longest leaf, the main leaf, carries the fixings at each end.
Air springs
An air spring is a reinforced rubber bag filled with compressed air from a small compressor. Height sensors and valves let a control unit add or release air, so the vehicle can keep the same ride height whatever the load, or be raised and lowered.
Air suspension can sink if it leaks or the system is switched off. HSE warns never to work under an air-suspended vehicle unless it is propped.
How fast does a car bounce?
A mass on a spring bounces at its natural frequency:
f = (1 ÷ 2π) × √(k ÷ m)
where k is the spring rate in N/m and m is the sprung mass on that corner in kg. Many passenger cars are designed to bounce at roughly 1 to 1.5 times per second, which most people find comfortable. Stiffer springs or a lighter load give a higher frequency and a firmer ride.
Springs in the MOT
Section 5.3 of the MOT inspection manual covers suspension. A spring that is fractured or seriously weakened is a major defect; a fractured main leaf of a leaf spring is dangerous. A missing spring is major, and dangerous if steering control is affected. For gas, air and fluid suspension, a system that is inoperative is dangerous and an obvious leak is major.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Steering and suspension lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- DVSA MOT inspection manual: cars and passenger vehicles – 5. Axles, wheels, tyres and suspension
- HSE – Working under vehicles
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.