▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Hydraulic and electric power steering – Motor Vehicle Theory motor mechanics lesson

Lesson 77 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how power steering adds force to the driver's effort, how a hydraulic system and an electric system each sense what the driver wants, and why most new cars now use electric assistance.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

The calculations use force = pressure × area and power = voltage × current. Power steering fluid is hot and under high pressure, and steering electronics are safety-critical; this lesson explains how the systems work, not how to repair them. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Electric power steering lets a car steer itself for lane keeping or parking. What checks would you want in place before a computer is allowed to turn a car's wheels?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a car cannot be steered at all if the power steering fails. The mechanical link is still there. The steering becomes much heavier, especially when parking, which is dangerous if unexpected, but the wheels can still be turned.
  • Thinking electric power steering uses a fluid like hydraulic steering. EPS has no pump, hoses or fluid. An electric motor gives the help.
  • Thinking the assistance is the same at every speed. Most systems give more help at low speed and less at high speed, so the car feels steady on the motorway.

Hands-on: Feel the idea of assistance with a bicycle and an adult: with the adult holding the bicycle steady and upright, turn the handlebars slowly while a friend presses lightly down on the saddle, then with no one pressing. Notice how the load on the front tyre changes the effort. Then draw a flow chart for electric power steering: torque sensor → control unit (also reading road speed) → motor → rack. Do not touch any part of a real car's steering system.

What you will learn

  • I can explain why power assistance is needed and how much of the work it does.
  • I can describe how a hydraulic system uses a pump, a rotary valve and a ram to assist the rack.
  • I can describe how electric power steering uses a torque sensor, a control unit and an electric motor.
  • I can calculate force from pressure and area, and power from voltage and current.
  • I can explain what the driver feels if the assistance fails.

Key words

power assistance
Extra force added to the driver's effort so the steering is lighter, especially when parking.
rotary valve
A valve in a hydraulic steering gear that senses the twist of a small torsion bar and sends fluid to one side of the ram or the other.
torque sensor
A sensor in an electric power steering system that measures how hard the driver is turning the wheel.
EPS
Electric power steering: assistance from an electric motor controlled by an electronic control unit.
relief valve
A valve that limits the highest pressure in a hydraulic system, protecting the pump and hoses.

The big ideas

Turning the front wheels of a heavy, modern car at walking pace takes a lot of force, because the wide tyres scrub on the road and the weight of the engine often sits over them. A higher steering ratio would make it lighter, but the driver would then need many turns of the wheel. Power steering solves the problem by adding force only when the driver asks for it.

There are two main types. Hydraulic power steering uses fluid under pressure from a pump to push a piston fixed to the rack. Electric power steering (EPS) uses an electric motor, controlled by a computer that reads how hard the driver is turning. In both, the mechanical link from the steering wheel to the road wheels is still there, so the car can still be steered if the assistance fails – it just feels much heavier.

This lesson explains how the systems work. Hydraulic fluid is hot and under high pressure, and EPS is part of the vehicle's safety electronics, so work on either is for a trained technician.

Read-through: the teaching steps

  1. Hydraulic: the pump and the ram

    In a hydraulic system, a pump – usually driven by a belt from the engine – pushes fluid round a circuit. The steering rack has a piston fixed to it, inside a cylinder called the ram. Fluid pressure on one side of the piston pushes the rack one way; on the other side, the other way.

    A relief valve limits the highest pressure. A reservoir holds a reserve of fluid, with minimum and maximum marks.

  2. Hydraulic: the rotary valve

    The valve that decides where the fluid goes sits around the pinion. Inside it is a thin torsion bar. When the driver turns the wheel, the resistance of the tyres makes the torsion bar twist slightly. That small twist lines up ports in the valve, sending pressure to the side of the ram that helps the turn.

    The harder the driver turns, the more the bar twists and the more assistance is given. With no effort on the wheel, the valve is centred, the fluid circulates freely and no assistance is given.

  3. The drawback of an engine-driven pump

    An engine-driven pump turns all the time the engine runs, even on a straight road, so it uses some energy all the time. Some systems use an electric motor to drive the pump instead (electro-hydraulic steering), so the pump runs only as fast as needed.

  4. Electric power steering

    In EPS there is no fluid at all. A torque sensor in the column or the pinion measures how hard the driver is turning. A control unit reads that, together with road speed, and tells an electric motor how much help to give. The motor may be on the column, on the pinion, or around the rack.

    EPS uses energy only when steering help is needed, which saves fuel. Because a computer controls it, the help can be large at parking speeds and small at high speed, and the same motor can be used by driver-assistance features such as lane keeping and parking assist.

  5. When assistance fails

    If a belt breaks, fluid leaks away or an EPS fault switches the motor off, the mechanical steering still works but becomes much heavier, especially at low speed. EPS systems light a warning lamp when they detect a fault.

    A driver who notices heavy steering, a whining noise from a hydraulic pump, or a steering warning lamp should have the car checked by a trained technician.

  6. Power steering in the MOT

    Section 2 of the MOT inspection manual covers power steering. For a hydraulic system, fluid below the minimum mark is a minor defect and an empty reservoir is major; the tester checks through the reservoir without removing the cap. A leaking or malfunctioning system is major. For electric power steering, a warning lamp showing a malfunction is a major defect, and so is assistance that is not working.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Steering and suspension lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.