▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Springs: coil, leaf, torsion bar and air – Motor Vehicle Theory motor mechanics lesson

Lesson 78 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Compare the four main kinds of suspension spring, learn what spring rate means, and use it to work out how far a spring compresses and how fast a car bounces.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

The calculations use spring rate, deflection and the formula for the natural frequency of a mass on a spring. Compressed road springs store a great deal of energy: this lesson is theory only. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “An empty van rides harshly but feels fine when fully loaded. Using what you know about spring rate and natural frequency, explain why.”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a stiffer spring is always safer. A spring that is too stiff lets the tire skip over bumps and lose grip. The rate is chosen to balance comfort, grip and load.
  • Thinking the spring stops the car bouncing. A spring stores and returns energy, so on its own it keeps bouncing. The shock absorber turns that energy into heat.
  • Thinking a coil spring works by bending. The wire of a coil spring mainly twists as the coil is compressed, which is why it behaves like a wound-up torsion bar.

Hands-on: Hang a small weight (such as a bag of rice) from a rubber band or a long spring from a hardware shop, fixed to a table edge. Measure how far it stretches with one bag and with two, and work out the rate in N per mm (1 kg ≈ 10 N). Then pull the weight down gently, let go, and count the bounces in 10 seconds to find its frequency. Never try to compress or remove a spring from a real vehicle: they store enough energy to cause serious injury.

What you will learn

  • I can explain what a suspension spring does and the difference between sprung and unsprung mass.
  • I can describe how coil, leaf, torsion bar and air springs store energy.
  • I can calculate spring rate, deflection and the natural frequency of a corner of a car.
  • I can explain why compressed springs are dangerous and are handled only by trained technicians.

Key words

spring rate
The force needed to compress a spring by one unit of length, for example newtons per millimeter (N/mm).
sprung mass
The part of the vehicle's mass carried by the springs: the body, engine, passengers and load.
unsprung mass
The mass not carried by the springs: wheels, tires, brakes, hubs and part of the suspension arms.
progressive spring
A spring whose rate rises as it is compressed, so it is soft over small bumps and firmer over big ones.
natural frequency
The number of times per second a mass on a spring bounces up and down if it is disturbed and left alone.

The big ideas

Every road has bumps. Without springs, each bump would throw the whole car upwards, the tires would leave the road and the people inside would be shaken about. A suspension spring lets the wheel move up and down while the body stays much steadier. It stores the energy of the bump and gives it back.

There are four main types. A coil spring is a steel bar wound into a helix. A leaf spring is a stack of curved steel strips. A torsion bar is a straight steel bar that twists. An air spring is a strong rubber bag filled with compressed air. All of them follow the same idea: the more they are deflected, the more force they push back with.

A spring alone would keep bouncing, so each spring works with a shock absorber, covered in the next lesson. A suspension spring holding up a car stores a great deal of energy: removing or compressing one is dangerous work for trained technicians with the correct equipment only.

Read-through: the teaching steps

  1. What springs do

    Springs carry the weight of the car and let each wheel follow the road. The body, engine, people and load are the sprung mass. The wheels, tires, brakes and hubs are the unsprung mass.

    The lighter the unsprung mass compared with the sprung mass, the better: a light wheel can follow bumps quickly while the heavy body hardly moves.

  2. Spring rate

    Spring rate is force ÷ deflection. A spring that needs 2,500 N to compress it by 100 mm has a rate of 25 N/mm.

    For a simple spring the rate stays the same through its travel (a linear spring), so twice the force gives twice the deflection. A progressive spring – for example a coil with its turns closer together at one end – gets firmer as it is compressed.

  3. Coil springs and torsion bars

    A coil spring is a steel rod wound into a helix. When it is compressed, the steel in the rod is actually twisted, so a coil spring is really a torsion bar wound up into a compact shape. Coil springs are light and compact, and are used on most cars, often around a shock absorber.

    A torsion bar is a straight steel bar fixed at one end and twisted by a suspension arm at the other. It takes up little space and on some vehicles the ride height can be set by changing the angle at the fixed end.

  4. Leaf springs

    A leaf spring is a stack of curved steel leaves clamped together, fixed to the body at each end and to the axle in the middle. As well as springing the vehicle, it locates the axle, so no extra arms are needed. That makes it simple and strong, so it is common on vans, pick-ups and trucks.

    The leaves rub on each other as the spring flexes. That friction gives some damping but also a harsher ride. The longest leaf, the main leaf, carries the fixings at each end.

  5. Air springs

    An air spring is a reinforced rubber bag filled with compressed air from a small compressor. Height sensors and valves let a control unit add or release air, so the vehicle can keep the same ride height whatever the load, or be raised and lowered.

    Air suspension can sink if it leaks or the system is switched off. HSE warns never to work under an air-suspended vehicle unless it is propped.

  6. How fast does a car bounce?

    A mass on a spring bounces at its natural frequency:

    f = (1 ÷ 2π) × √(k ÷ m)

    where k is the spring rate in N/m and m is the sprung mass on that corner in kg. Many passenger cars are designed to bounce at roughly 1 to 1.5 times per second, which most people find comfortable. Stiffer springs or a lighter load give a higher frequency and a firmer ride.

  7. Springs in a state inspection

    Where a state requires a periodic safety inspection, the suspension is checked. In Virginia, for example, steering and suspension are one of the 24 inspection steps. Rules are set by each state, so check your own state's official source.

    In a workshop, a technician looks for broken or sagging springs, uneven ride height and leaks from air springs.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Steering and suspension lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.