Personal protective equipment: selecting and maintaining – Motor Vehicle Theory motor mechanics lesson
Lesson 8 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Learn how workshop PPE is chosen to match each hazard, why it comes last in the order of controls, and what HSE says employers and workers must do to keep it effective.
- Time
- 40 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
This lesson summarises HSE guidance on PPE, dated November 2026. The activity is a paper chart. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If PPE only protects the wearer, why do you think it is still so important in workshops?”
- Later: the homework, then the practice test.
Watch out for
- Thinking PPE is the first and best control. It is the last line of defence; remove or reduce the hazard first.
- Thinking one type of glove or mask protects against everything. Each hazard needs the right type, chosen from the risk assessment and product information.
- Thinking workers can be charged for required PPE. HSE says employers must supply it free of charge if a risk assessment shows it is needed.
Hands-on: Make a PPE chart on paper with five rows: eyes, hands, feet, hearing, lungs. For each, write one workshop hazard and the PPE that protects against it, and draw the matching safety sign (blue circle signs mean 'must wear'). With an adult, find a real 'must wear' sign in a public place or on a product and copy it.
What you will learn
- I can explain why PPE is the last line of defence.
- I can match PPE to common workshop hazards.
- I can state employers' PPE duties in Great Britain, as summarised by HSE.
- I can explain why fit, maintenance and storage matter.
Key words
- PPE
- Personal protective equipment: items worn or held to protect against hazards, such as eye protection, gloves and safety footwear.
- RPE
- Respiratory protective equipment: masks and breathing apparatus that protect against harmful airborne substances.
- hazard assessment
- Looking at the work to find hazards that PPE must protect against.
- fit
- How well PPE matches the wearer; a poor fit can leave gaps or make it uncomfortable to wear.
- limb (b) worker
- A type of worker who, since 2022, is covered by employers' PPE duties in Great Britain as well as employees.
The big ideas
Personal protective equipment – safety glasses, gloves, boots, ear defenders, overalls and breathing protection – is the most visible part of workshop safety. But it is the last line of defence. HSE explains that PPE may be needed when hazards remain after engineering controls and safe systems of work have been applied.
In Great Britain, HSE says employers must supply PPE free of charge if a risk assessment shows it is needed, make sure it is suitable, maintain and store it properly, and give instructions and training; workers must use it correctly. The law was extended in 2022 to cover 'limb (b) workers' as well as employees.
This lesson explains how PPE is chosen and kept effective. Learners always wear the PPE their teacher or supervisor gives them.
Read-through: the teaching steps
Why PPE comes last
PPE does not remove the hazard. It protects only the person wearing it, and only when it is the right type, fits, is in good condition and is worn all the time the hazard exists. Removing the hazard, substituting a safer material or adding guards and extraction protect everyone at once – so they come first.
Matching PPE to hazards
- Eyes – flying particles from grinding, splashes of acid or coolant: safety glasses, goggles or a face shield.
- Hands – oils, solvents, sharp edges, hot parts: gloves chosen for the hazard.
- Feet – dropped components: safety footwear.
- Hearing – air tools and panel work: ear defenders or earplugs.
- Lungs – dusts and paint mists: respiratory protection; HSE says isocyanate paint spraying needs air-fed breathing protection.
- Body – overalls to keep oil off skin and clothes.
Choosing the right type
There is no single 'safety glove'. A glove that resists oil may let a solvent through; a thick glove may protect from cuts but reduce grip. Respirators need the right filter for the substance. Choice comes from the risk assessment and the product information, not from guesswork.
Fit and comfort
PPE that does not fit leaves gaps – a respirator that does not seal lets air round the edge. Uncomfortable PPE tends to be taken off. Offering a choice of sizes and styles helps people wear it properly.
Maintenance, storage and replacement
Glasses get scratched, gloves split, filters clog. PPE is checked before use, cleaned, stored where it will not be damaged or contaminated, and replaced when worn or damaged. Damaged PPE is never used.
The law in Great Britain
HSE summarises the duties:
- supply PPE free of charge if a risk assessment shows it is needed;
- make sure it is properly assessed as fit for purpose;
- maintain and store it properly;
- give instructions on safe use, and sufficient information, instruction and training;
- workers use it correctly.
Since 2022 the duties also cover limb (b) workers.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Workshop safety lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.