Personal protective equipment: selecting and maintaining – Motor Vehicle Theory motor mechanics lesson
Lesson 8 of 131 in the Motor Vehicle Theory course (ages 16+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Learn how shop PPE is chosen to match each hazard, why it comes last in the order of controls, and what OSHA's PPE standard requires of employers and workers.
- Time
- 40 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.
How to use this lesson
This lesson summarizes OSHA's PPE standard, dated November 2026. The activity is a paper chart. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If PPE only protects the wearer, why do you think it is still so important in workshops?”
- Later: the homework, then the practice test.
Watch out for
- Thinking PPE is the first and best control. It is the last line of defense; remove or reduce the hazard first.
- Thinking one type of glove or mask protects against everything. Each hazard needs the right type, chosen from the risk assessment and product information.
- Thinking workers must always buy their own PPE. OSHA says employers must generally provide required PPE at no cost, with a few exceptions.
Hands-on: Make a PPE chart on paper with five rows: eyes, hands, feet, hearing, lungs. For each, write one workshop hazard and the PPE that protects against it, and draw the matching safety sign (blue circle signs mean 'must wear'). With an adult, find a real 'must wear' sign in a public place or on a product and copy it.
What you will learn
- I can explain why PPE is the last line of defense.
- I can match PPE to common shop hazards.
- I can state employers' duties under OSHA 1910.132: assessment, selection, training and payment.
- I can explain why fit, maintenance and replacement matter.
Key words
- PPE
- Personal protective equipment: items worn or held to protect against hazards, such as eye protection, gloves and safety footwear.
- RPE
- Respiratory protective equipment: masks and breathing apparatus that protect against harmful airborne substances.
- hazard assessment
- Looking at the work to find hazards that PPE must protect against.
- fit
- How well PPE matches the wearer; a poor fit can leave gaps or make it uncomfortable to wear.
- 1910.132
- OSHA's general requirements for personal protective equipment.
The big ideas
Personal protective equipment – safety glasses, gloves, boots, hearing protection, coveralls and breathing protection – is the most visible part of shop safety. But it is the last line of defense: it is needed for the hazards that remain after engineering controls and safe work practices.
OSHA's PPE standard, 29 CFR 1910.132, requires employers to assess the workplace for hazards, certify the assessment in writing, select PPE that properly fits each worker, train workers – who must show they understand – and not allow defective or damaged PPE to be used. Employers must generally provide required PPE at no cost, with a few exceptions.
This lesson explains how PPE is chosen and kept effective. Learners always wear the PPE their teacher or supervisor gives them.
Read-through: the teaching steps
Why PPE comes last
PPE does not remove the hazard. It protects only the person wearing it, and only when it is the right type, fits, is in good condition and is worn all the time the hazard exists. Removing the hazard, substituting a safer material or adding guards and extraction protect everyone at once – so they come first.
Matching PPE to hazards
- Eyes – flying particles from grinding, splashes of acid or coolant: safety glasses, goggles or a face shield.
- Hands – oils, solvents, sharp edges, hot parts: gloves chosen for the hazard.
- Feet – dropped components: safety footwear.
- Hearing – air tools and panel work: ear defenders or earplugs.
- Lungs – dusts and paint mists: respiratory protection; HSE says isocyanate paint spraying needs air-fed breathing protection.
- Body – overalls to keep oil off skin and clothes.
Choosing the right type
There is no single 'safety glove'. A glove that resists oil may let a solvent through; a thick glove may protect from cuts but reduce grip. Respirators need the right filter for the substance. Choice comes from the risk assessment and the product information, not from guesswork.
Fit and comfort
PPE that does not fit leaves gaps – a respirator that does not seal lets air round the edge. Uncomfortable PPE tends to be taken off. Offering a choice of sizes and styles helps people wear it properly.
Maintenance, storage and replacement
Glasses get scratched, gloves split, filters clog. PPE is checked before use, cleaned, stored where it will not be damaged or contaminated, and replaced when worn or damaged. Damaged PPE is never used.
OSHA 1910.132
OSHA's standard requires employers to:
- assess the workplace for hazards and certify the assessment in writing;
- select PPE that protects against those hazards and properly fits each worker;
- not allow defective or damaged PPE to be used;
- train workers on when PPE is needed, which PPE, how to put it on, adjust, wear and take it off, its limits, care, useful life and disposal – and workers must show they understand;
- retrain when things change;
- generally provide required PPE at no cost (exceptions include non-specialty safety-toe footwear and prescription safety eyewear worn off the job).
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Workshop safety lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.