Health and safety law in the workshop: who is responsible – Motor Vehicle Theory motor mechanics lesson
Lesson 1 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Learn how health and safety law works in a UK workshop: the Health and Safety at Work etc Act 1974, the duties of employers and employees, HSE's role and why risk assessments are recorded.
- Time
- 45 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
This lesson summarises the general shape of UK health and safety law from HSE pages, dated November 2026. It is not legal advice and does not replace workplace training. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think the law places most duties on the employer rather than on individual workers?”
- Later: the homework, then the practice test.
Watch out for
- Thinking health and safety is only the employer's job. The 1974 Act gives employees duties to themselves and to each other.
- Thinking a small garage need not assess risk. Every employer must manage risk. Only the duty to write down significant findings starts at 5 employees.
- Thinking accidents are mostly caused by rare, dramatic events. Most accidents involve slips, trips, falls and manual handling – everyday hazards.
Hands-on: Draw a responsibility map for a small garage on paper: put 'employer', 'employee', 'learner' and 'customer' in four boxes. Under each, write two things the 1974 Act or HSE guidance expects. Draw arrows to show who owes a duty to whom.
What you will learn
- I can name the main UK law on health and safety at work and the regulator, HSE.
- I can describe the duties of employers, employees and the self-employed.
- I can explain the duty to manage risk and when findings must be recorded.
- I can state what HSE says causes most deaths and accidents in motor vehicle repair.
Key words
- duty of care
- A legal responsibility to take reasonable care not to cause harm to others.
- hazard
- Anything with the potential to cause harm.
- risk
- How likely it is that a hazard will cause harm, and how serious the harm could be.
- HSWA 1974
- The Health and Safety at Work etc Act 1974: the main UK law setting general duties for workplace safety.
- HSE
- The Health and Safety Executive, Great Britain's regulator for workplace health and safety.
The big ideas
A vehicle workshop contains heavy loads held in the air, flammable fuel, compressed air, hot parts and hazardous substances. Safety law exists so that the people in charge plan for these hazards, and so that everyone working there knows their part.
In Great Britain the main law is the Health and Safety at Work etc Act 1974. HSE explains that it sets out the general duties that employers have towards employees and members of the public, that employees have to themselves and to each other, and that certain self-employed people have towards themselves and others. More detailed regulations, and HSE guidance, sit beneath it.
HSE's guidance on motor vehicle repair is blunt: most deaths happen when a person is trapped under an inadequately supported vehicle, and most accidents involve slips, trips, falls and manual handling. This lesson explains who is responsible for what. It is theory only; as a learner you never work on a vehicle except under the direct supervision of a qualified person.
Read-through: the teaching steps
The Act and its duties
HSE summarises the Health and Safety at Work etc Act 1974 as setting out general duties:
- employers – towards employees and members of the public;
- employees – to themselves and to each other;
- certain self-employed people – towards themselves and others.
The duties are general on purpose: they apply to every kind of workplace, while specific regulations cover particular hazards.
The employer's part
In a garage the employer controls the building, the equipment and the way work is organised, so most duties fall on them: safe equipment, safe systems of work, information, instruction, training and supervision, and a safe place of work. They must also protect customers and visitors – for example, keeping them out of the workshop area.
The worker's part
Employees must take reasonable care of themselves and of anyone affected by what they do, and co-operate with the employer: follow training and safe systems of work, use the equipment provided, and report hazards. A learner on placement has exactly the same responsibility to colleagues.
Managing risk
HSE's guidance gives five steps: identify hazards; assess the risks; control the risks; record your findings; review the controls. If a business employs 5 or more people it must record its significant findings: the hazards, who could be harmed and how, and the controls in place.
What goes wrong in workshops
British guidance for motor vehicle repair highlights:
- deaths – mostly people trapped under inadequately supported vehicles;
- accidents – mostly slips, trips, falls and manual handling;
- fires and explosions – especially work on fuel tanks or lines;
- tyre explosions and multi-piece wheels;
- hazardous substances – used engine oil, isocyanate paints, asbestos in older brake and clutch linings, battery acid and gases.
Each of these has its own lesson in this unit.
The learner's rules
Whatever the law in your country:
- work only under the direct supervision of a qualified person;
- never go under a vehicle supported only by a jack;
- wear the PPE you are given;
- report hazards and near misses;
- refuse an instruction you believe is unsafe, and tell a supervisor.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Workshop safety lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- HSE – Health and Safety at Work etc Act 1974
- HSE – Steps needed to manage risk
- HSE – Introduction to safe motor vehicle repair
- HSE – Working under vehicles
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.