▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Health and safety law in the workshop: who is responsible – Motor Vehicle Theory motor mechanics lesson

Lesson 1 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Learn how workplace safety law works in a US repair shop: the OSH Act of 1970, OSHA's role, the General Duty Clause, and what employers and workers are each responsible for.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

This lesson summarizes the general shape of US workplace safety law from OSHA pages, dated November 2026. It is not legal advice and does not replace workplace training. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think the law places most duties on the employer rather than on individual workers?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking safety is only the employer's job. Workers must follow training and safe practices and report hazards.
  • Thinking that if there is no specific OSHA standard, there is no duty. The General Duty Clause covers serious recognized hazards that no specific standard addresses.
  • Thinking accidents are mostly caused by rare, dramatic events. Most accidents involve slips, trips, falls and manual handling – everyday hazards.

Hands-on: Draw a responsibility map for a small repair shop on paper: put 'employer', 'worker', 'learner' and 'customer' in four boxes. Under each, write two things OSHA or the General Duty Clause expects. Draw arrows to show who owes a duty to whom.

What you will learn

  • I can name the US law on workplace safety and the agency, OSHA.
  • I can explain the General Duty Clause.
  • I can list key employer duties: training, records, reporting and the poster.
  • I can explain how lift safety is covered without a specific OSHA standard.

Key words

duty of care
A legal responsibility to take reasonable care not to cause harm to others.
hazard
Anything with the potential to cause harm.
risk
How likely it is that a hazard will cause harm, and how serious the harm could be.
General Duty Clause
Section 5(a)(1) of the OSH Act: employers must keep the workplace free of serious recognized hazards.
OSHA
The Occupational Safety and Health Administration, the federal agency created by the OSH Act of 1970.

The big ideas

A repair shop contains heavy loads held in the air, flammable fuel, compressed air, hot parts and hazardous substances. Safety law exists so that the people in charge plan for these hazards, and so that everyone working there knows their part.

In the United States the Occupational Safety and Health Act of 1970 created OSHA. OSHA says employers have a responsibility to provide a safe workplace, and must comply with the General Duty Clause, keeping the workplace free of serious recognized hazards. Specific OSHA standards add detailed rules for particular hazards, and some states run their own OSHA-approved programs.

British safety guidance for motor vehicle repair is blunt: most deaths happen when a person is trapped under an inadequately supported vehicle, and most accidents involve slips, trips, falls and manual handling. This lesson explains who is responsible for what. It is theory only; as a learner you never work on a vehicle except under the direct supervision of a qualified person.

Read-through: the teaching steps

  1. The OSH Act and OSHA

    The Occupational Safety and Health Act of 1970 created OSHA. OSHA covers most private-sector employers in all 50 states and DC, either directly or through an OSHA-approved state program. The self-employed are not covered.

    OSHA standards set specific rules for particular hazards, and the General Duty Clause covers serious recognized hazards that no specific standard addresses.

  2. The employer's part

    OSHA lists what employers must do, including:

    • provide a workplace free of serious recognized hazards;
    • provide OSHA-required training in a manner workers can understand;
    • keep injury and illness records;
    • report all severe injuries and fatalities;
    • post OSHA's Job Safety and Health Poster.
  3. The worker's part

    Workers are expected to follow the training and safe work practices provided, use the protective equipment supplied, and report hazards and injuries. OSHA also provides whistleblower protections against retaliation for raising safety concerns. A learner on placement has the same responsibility to colleagues.

  4. Lifts and the General Duty Clause

    OSHA's 2014 interpretation letter says no specific OSHA standard applies to automotive lifts. The employer must still provide a workplace free from recognized hazards under the General Duty Clause, and ANSI/ALI ALOIM:2008 is the recognized industry standard for operating, inspecting and maintaining lifts. This shows how the clause fills gaps between specific standards.

  5. What goes wrong in workshops

    British guidance for motor vehicle repair highlights:

    • deaths – mostly people trapped under inadequately supported vehicles;
    • accidents – mostly slips, trips, falls and manual handling;
    • fires and explosions – especially work on fuel tanks or lines;
    • tire explosions and multi-piece wheels;
    • hazardous substances – used engine oil, isocyanate paints, asbestos in older brake and clutch linings, battery acid and gases.

    Each of these has its own lesson in this unit.

  6. The learner's rules

    Whatever the law in your country:

    • work only under the direct supervision of a qualified person;
    • never go under a vehicle supported only by a jack;
    • wear the PPE you are given;
    • report hazards and near misses;
    • refuse an instruction you believe is unsafe, and tell a supervisor.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Workshop safety lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.