Stopping distances: thinking and braking – Garage Basics motor mechanics lesson
Lesson 28 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out why a car travels a long way before it stops, split stopping distance into thinking and braking distance, and calculate both.
- Time
- 45 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
A calculator helps. The ruler test measures a simple reaction to an expected event; real driving reactions include noticing and deciding, so they are longer. Please supervise any roadside observation closely. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think reaction times in the ruler test are shorter than a driver's reaction time on a real road?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the car starts slowing as soon as the driver sees a hazard. During the reaction time the car carries on at full speed. That is the thinking distance.
- Thinking twice the speed means twice the stopping distance. Thinking distance doubles but braking distance goes up four times, so the total more than doubles.
- Using mph in a formula with seconds and metres. Change mph to m/s first by multiplying by 0.447.
Hands-on: Measure your reaction time with the ruler-drop test: a partner holds a 30 cm ruler at the top, you hold your finger and thumb open at the 0 mark, and you catch it when they drop it without warning. A catch at 20 cm means about 0.2 s; at 30 cm about 0.25 s. Then, with an adult, stand safely on the pavement and count "one thousand and one, one thousand and two" as a car passes a lamp post to see a two-second gap between cars.
What your child will learn
- I can explain that stopping distance = thinking distance + braking distance.
- I can calculate thinking distance from speed and reaction time.
- I can calculate braking distance using speed² ÷ (2 × deceleration).
- I can list factors that make thinking distance and braking distance longer.
Key words
- thinking distance
- How far the car travels while the driver sees a hazard and reacts, before the brakes start working.
- braking distance
- How far the car travels from when the brakes start working until it stops.
- stopping distance
- Thinking distance + braking distance.
- reaction time
- The time between seeing a hazard and starting to press the brake.
- deceleration
- How quickly speed falls, in metres per second per second (m/s²).
The big ideas
A car cannot stop the moment a driver sees danger. First the driver has to notice the hazard, decide to brake and move a foot to the pedal. During this reaction time the car carries on at full speed. The distance covered is the thinking distance. Then the brakes work and the car slows down; the distance covered while slowing is the braking distance. Together they make the stopping distance.
Thinking distance grows in proportion to speed: twice as fast, twice as far. Braking distance grows with the square of the speed: twice as fast, four times as far. That is why stopping distance rises so steeply at higher speeds.
The Highway Code (rule 126) says drivers should never get closer than the overall stopping distance to the vehicle in front, should allow at least a two-second gap on high-speed roads, at least double that on wet roads and up to ten times greater on icy roads.
Read-through: the teaching steps
Two parts
Stopping distance = thinking distance + braking distance.
The thinking part depends on the driver. The braking part depends on the car, its tyres and the road.
Thinking distance
During the reaction time the car does not slow down at all.
thinking distance = speed × reaction time
At 20 m/s with a reaction time of 0.7 s: 20 × 0.7 = 14 m. A typical alert driver reacts in about 0.7 s, but tiredness, alcohol, drugs and distractions such as a phone make it much longer.
Braking distance
With steady braking:
braking distance = speed² ÷ (2 × deceleration)
At 20 m/s with a deceleration of 8 m/s²: 20² ÷ (2 × 8) = 400 ÷ 16 = 25 m. Good tyres on a dry road can give a deceleration of about 7 to 8 m/s²; a wet road gives less, and ice far less.
Why speed matters so much
Double the speed and the thinking distance doubles, but the braking distance goes up four times. At 10 m/s (about 22 mph) with the numbers above, the car stops in 7 + 6.25 = 13.25 m. At 20 m/s it needs 14 + 25 = 39 m: almost three times as far.
What makes braking distance longer
- higher speed
- wet, icy or loose road surfaces
- worn tyres or tyres at the wrong pressure (the Highway Code notes that under- or over-inflation affects braking)
- worn brakes
- a heavily loaded car or going downhill
Speeds in m/s
Road speeds are in mph but the physics uses m/s. 1 mph is about 0.447 m/s, so 30 mph is about 13.4 m/s and 60 mph is about 26.8 m/s. To convert, multiply mph by 0.447.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Brakes, steering and suspension lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- GOV.UK – Check your vehicle is safe to drive
- The Highway Code – Annex 6. Vehicle maintenance, safety and security
- The Highway Code – Rules 103 to 158: general rules for all drivers and riders
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.