▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Petrol engines and diesel engines compared – Garage Basics motor mechanics lesson

Lesson 6 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Compare petrol and diesel engines side by side: how they ignite the fuel, how hard they squeeze the air, how the fuel gets in and how their exhausts are cleaned.

Time
45 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Looking at a fuel filler label from outside a parked, locked car is the only real-vehicle part; no fuel should be handled. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think almost all large lorries use diesel engines, while most small city cars do not?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking glow plugs ignite the fuel all the time, like spark plugs. Glow plugs only warm the cylinder to help starting. Once running, a diesel ignites its fuel by compression alone.
  • Thinking diesel engines have no exhaust cleaning. Modern diesels use an oxidation catalyst, a particulate filter and SCR with diesel exhaust fluid.
  • Thinking you can use either fuel in either engine. The engines work in completely different ways. The wrong fuel can cause serious damage – the car must not be started and a professional should deal with it.

Hands-on: Make a two-column comparison poster: "Petrol" and "Diesel". Include ignition, typical compression ratio, where the fuel is injected, exhaust cleaning parts, and one strength and one weakness each. Add a small drawing of a spark plug and of a fuel injector. Then, with an adult, look at the fuel filler caps or labels on two parked cars (from outside the car only) to see which fuel each takes.

What your child will learn

  • I can explain the difference between spark ignition and compression ignition.
  • I can compare the compression ratios and fuel injection of petrol and diesel engines.
  • I can name the exhaust treatment parts used on each type.
  • I can give one advantage and one disadvantage of each type.

Key words

spark ignition
Igniting the fuel and air mixture with an electric spark from a spark plug, as in a petrol engine.
compression ignition
Igniting fuel by injecting it into air made very hot by compression, as in a diesel engine.
glow plug
A small electric heater in each cylinder of many diesel engines that helps them start from cold.
diesel particulate filter
A filter in a diesel exhaust that captures soot (particulate matter).
selective catalytic reduction
A diesel exhaust system that uses diesel exhaust fluid to turn nitrogen oxides into nitrogen and water.

The big ideas

Petrol and diesel engines both work on the four-stroke cycle: intake, compression, power and exhaust. The big difference is how the fuel is ignited.

The US Department of Energy describes a petrol car as using a spark-ignited engine: fuel is injected into the intake manifold or the combustion chamber, mixed with air and ignited by the spark plug. A diesel is compression-ignited: it draws in and squeezes only air, then fuel is injected straight into the combustion chamber and is ignited by the high temperature of the compressed air.

That one difference leads to many others. Diesels squeeze their air much harder, are built more strongly, and give strong turning force at low engine speeds, which suits heavy vehicles. Their exhausts need extra cleaning: a diesel oxidation catalyst, a diesel particulate filter and selective catalytic reduction using diesel exhaust fluid. A petrol engine's exhaust is cleaned mainly by a three-way catalytic converter.

Read-through: the teaching steps

  1. Same four strokes

    Both engines use intake, compression, power and exhaust. The drawing on the lesson page shows the strokes; on a diesel, imagine an injector in place of the spark plug and only air coming in on the intake stroke.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. Ignition

    • Petrol: the mixture is compressed, then a spark plug ignites it at just the right moment.
    • Diesel: only air is compressed, so it becomes very hot. Fuel sprayed in at high pressure ignites by itself.

    Many diesels have glow plugs that warm the cylinders to help starting in cold weather.

  3. Compression

    Because a petrol mixture can ignite too early (knock), petrol engines use moderate compression ratios, typically about 10:1. Diesels must make the air hot enough to ignite fuel, so they typically use about 15:1 to 20:1. Higher pressures mean diesel engines are built more strongly and are usually heavier.

  4. Getting fuel in

    In a petrol engine, fuel is injected into the intake manifold (port injection) or straight into the combustion chamber (direct injection). In a diesel, fuel is always injected directly into the combustion chamber, at very high pressure, at the moment it should burn. The amount of fuel injected controls the power.

  5. Cleaning the exhaust

    Petrol: a three-way catalytic converter changes harmful carbon monoxide, unburned fuel and nitrogen oxides into less harmful gases.

    • Diesel (US Department of Energy):
    • Diesel oxidation catalyst
    • Diesel particulate filter – captures soot
    • Selective catalytic reduction (SCR) – uses diesel exhaust fluid (a solution of urea in water, kept in its own tank) to turn nitrogen oxides into nitrogen and water
  6. Strengths and weaknesses

    • Diesel: strong pulling at low engine speed, usually good fuel economy, suits lorries, buses and towing; but heavier, more complex exhaust cleaning and higher nitrogen oxide output to deal with.
    • Petrol: lighter, revs higher, simpler exhaust cleaning, often quieter; but usually uses more fuel for the same work.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.