▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Swept wings and the area rule – Navigation and Technology aviation lesson

Lesson 33 of 90 in the Navigation and Technology course (ages 14+)

UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version

Why do jet airliners have wings that slant backwards, and why did one 1950s fighter only go supersonic after its body was given a 'waist'? Find out how designers tamed the shock waves that appear near the speed of sound.

Time
45 minutes + 10 min homework
Course
Navigation and Technology (ages 14+)
You need
Paper, a pencil and this page
Marked
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.

How to use this lesson

Sources: US Centennial of Flight Commission essay on transonic wings and the area rule; Smithsonian Air & Space magazine article on Richard Whitcomb; FAA Pilot's Handbook of Aeronautical Knowledge, chapter 5 (Mach number and speed ranges). Good practice in ratios and squares for GCSE or high-school maths. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Whitcomb's idea came from thinking about the whole aircraft as one shape, not as separate wings and body. Can you think of another problem where looking at the whole thing, not its parts, gives the answer?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking shock waves only appear once the aircraft itself passes Mach 1. Air speeds up over the wing, so shocks can form at the critical Mach number, well below Mach 1.
  • Thinking swept wings are just for looks. Sweep delays the critical Mach number and cuts wave drag – it has a clear aerodynamic job.
  • Thinking the area rule is about making the aircraft smaller. It is about making the cross-sectional area change smoothly along the length, not about the total size.

Hands-on: Cut out ten paper discs of different sizes and line them up on a table in order, as if they were slices through an aircraft from nose to tail. Draw a graph of disc size against position. Now add two 'wing' slices that suddenly make the middle discs much bigger. Can you shrink the 'body' slices in the middle so the graph becomes a smooth hill again? That is the area rule.

What you will learn

  • I can explain what happens to airflow as an aircraft nears the speed of sound.
  • I can explain why swept wings delay shock waves, and one drawback of sweep.
  • I can describe the area rule and how it changed fuselage shapes.
  • I can calculate Mach numbers and the effect of wing thickness on drag rise.

Key words

Mach number
True airspeed divided by the local speed of sound. Mach 1 is the speed of sound.
critical Mach number
The flight Mach number at which the airflow somewhere on the aircraft first reaches the speed of sound.
transonic
The speed range around Mach 1 where some of the airflow is subsonic and some supersonic – roughly Mach 0.75 to 1.20.
sweep
Angling a wing backwards (or forwards) from the fuselage instead of straight out sideways.
area rule
The design idea that drag near and above Mach 1 is lowest when the aircraft's cross-sectional area changes smoothly from nose to tail.

The big ideas

As an aircraft speeds up, the air flowing over the curved top of its wing speeds up even more. Long before the aircraft itself reaches the speed of sound, some of that air does. The FAA's Pilot's Handbook calls the flight speed at which this first happens the critical Mach number. Beyond it, shock waves form, drag rises steeply, and the controls can behave strangely. The Handbook calls the band from about Mach 0.75 to 1.20 'transonic'.

In 1935 the German aerodynamicist Adolf Busemann suggested a way round this: sweep the wing. The US Centennial of Flight Commission explains that sweep delays shock waves to a higher Mach number, because the air 'sees' a wing that is effectively thinner and has more time to adjust. That is why almost every jet airliner has swept wings. Sweep has a price: the Commission notes that swept-back wings tend to stall at the tips first, which can take away aileron control, so designers add twist and small fences on the wing.

In 1951 Richard Whitcomb, working at the US research agency NACA (NASA's forerunner), had another insight. Near Mach 1, the air does not care whether a bulge is wing or body – it reacts to how the total cross-sectional area grows and shrinks along the aircraft. Pinching the fuselage in where the wings join keeps the total smooth. Smithsonian magazine says this roughly halved the drag rise. A US delta-wing fighter, the F-102, could not go supersonic until it was redesigned with a narrow 'waist'. Whitcomb won America's top aviation prize, the Collier Trophy, for the idea in 1954.

Read-through: the teaching steps

  1. Air speeds up over a wing

    Air over the curved upper surface travels faster than the aircraft. So a jet flying at, say, Mach 0.8 can have air at Mach 1 over part of its wing. That flight speed is its critical Mach number.

  2. Shock waves and drag rise

    Above the critical Mach number, small shock waves form on the wing. The Centennial of Flight Commission notes that the extra drag grows roughly with the square of the wing's thickness-to-chord ratio – so thin wings help a lot.

  3. The swept wing

    • Proposed by Adolf Busemann in 1935.
    • Delays the critical Mach number and reduces wave drag.
    • Works because the wing 'looks' thinner to the airflow.

    Forward sweep works too, but the Commission notes it has its own low-speed handling problems.

  4. The catch: tip stall

    On a swept-back wing, the slow air near the surface drifts outwards towards the tips. The tips can then stall first, and the ailerons there lose their grip. Designers fight this with wing twist and small upright stall fences.

  5. The area rule

    Whitcomb's 1951 idea: plot the aircraft's cross-sectional area from nose to tail. If the curve has a sudden jump where the wings start, drag near Mach 1 is high. Squeeze the fuselage where the wings are, and add bulges further back if needed, until the curve is smooth.

  6. The fighter that needed a waist

    The Commission records that the first F-102 design had a big jump in area at the wings and so much transonic drag that the project was nearly cancelled. Redesigned with a narrowed waist and bulges behind the wing, it went supersonic and entered service in large numbers.

  7. Whitcomb's later ideas

    Around 1962 Whitcomb went on to the supercritical wing: a flatter top and a curled-down trailing edge that hold back shock waves. Smithsonian magazine says such wings are now used on all new airliners and business jets, cruising at up to Mach 0.92.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Aircraft technology lessons · Navigation and Technology course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.