▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Traction batteries: cells, modules and packs – Vehicles and Technology motor mechanics lesson

Lesson 2 of 50 in the Vehicles and Technology course (ages 14+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out how thousands of small cells are grouped into modules and packs, why cells are joined in series and in parallel, and how to work out a pack's voltage and energy in kilowatt-hours.

Time
45 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

The math here is multiplication and dividing by 1,000. Working out a few pack sizes together is a good way in. Batteries should never be opened or damaged; traction batteries are for trained technicians only. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Lithium-ion cells store a lot of energy in a small space. What would you want a battery designer to think about to keep a pack safe in a crash?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking that cells in parallel add up their voltages. Parallel keeps the voltage the same and adds the amp-hours. Series adds the voltages.
  • Confusing kW and kWh. kW is power – how fast energy flows. kWh is energy – how much is stored. A battery's size is in kWh; a charger's speed is in kW.
  • Thinking a battery is safe once the car is switched off. The cells still hold their energy. Only trained technicians work on a traction battery, and only after it has been safely isolated.

Hands-on: Use paper squares as "cells" and write 3.7 V and 50 Ah on each. Lay out a row of 4 in series and work out the voltage, then add a second row beside it in parallel and work out the new capacity and energy. Draw your layout and label it in the "4s2p" style. If you have household AA batteries and a simple battery holder at home, an adult can show you how the holder joins cells in series – look at the springs and contacts only; never cut open or damage any battery.

What you will learn

  • I can explain the difference between a cell, a module and a pack.
  • I can explain what joining cells in series and in parallel does to voltage and capacity.
  • I can calculate a pack's voltage and its energy in kilowatt-hours.
  • I can compare lithium-ion, nickel-metal hydride and lead-acid batteries.
  • I can explain why traction batteries are handled only by trained technicians.

Key words

cell
The smallest working unit of a battery: two electrodes and an electrolyte in one case. A typical lithium-ion cell gives about 3.6–3.7 volts.
module
A group of cells joined together in one frame, with wiring and sensors.
pack
The complete traction battery: modules, cooling, a battery management system and a strong protective case.
series
Joined end to end, positive to negative. Voltages add up.
parallel
Joined side by side, positive to positive. Capacities (amp-hours) add up; the voltage stays the same.
kilowatt-hour (kWh)
A unit of energy: one kilowatt for one hour. A traction battery's size is given in kWh.
battery management system (BMS)
The electronics that watch every cell's voltage and temperature and keep the pack working safely.

The big ideas

A traction battery is not one giant battery. It is many small cells joined together. A single lithium-ion cell typically gives only about 3.6 to 3.7 volts, but a car needs several hundred volts and enough stored energy to drive hundreds of kilometers.

Cells are joined in series to raise the voltage and in parallel to raise the capacity. Groups of cells are built into modules, and modules are built into a pack with cooling, sensors, a battery management system and a strong case that protects the cells in a crash.

The US Department of Energy's Alternative Fuels Data Center (AFDC) notes that most of today's all-electric cars and plug-in hybrids use lithium-ion batteries, which store a lot of energy for their mass and volume. Many hybrids have used nickel-metal hydride, and lead-acid batteries are now mainly used for the low-voltage side.

This lesson explains how packs are built and how to calculate their energy. A traction battery stores enough energy to be dangerous, so packs are handled only by trained technicians.

Read-through: the teaching steps

  1. Inside a cell

    Every cell has a positive electrode, a negative electrode, a separator between them and an electrolyte that lets charged particles (ions) move. When the cell discharges, lithium ions travel from the negative side to the positive side inside the cell while electrons flow round the outside circuit and do useful work.

    Charging pushes the ions back again. Cells come in different shapes: cylindrical (like a large flashlight battery), prismatic (flat rectangular cans) and pouch (thin flexible packets).

  2. Series: adding up the voltage

    Joining cells in series, positive to negative, adds their voltages. 96 cells of 3.7 V in series give 96 × 3.7 = 355.2 V.

    The current is the same through every cell in a series string, so one weak cell can hold the whole string back. That is why the battery management system watches every cell.

  3. Parallel: adding up the capacity

    Joining cells in parallel, positive to positive, keeps the voltage the same but adds their capacities. Two 50 Ah cells in parallel behave like one 100 Ah cell.

    Pack designers often describe a layout like "96s3p": 96 groups in series, each group made of 3 cells in parallel.

  4. Working out the energy

    Energy stored = voltage × capacity. With volts and amp-hours this gives watt-hours; divide by 1,000 for kilowatt-hours.

    • Energy (kWh) = voltage (V) × capacity (Ah) ÷ 1,000

    A 355 V pack with a capacity of 150 Ah stores 355 × 150 ÷ 1,000 = 53.25 kWh.

  5. Modules and the pack

    Cells are grouped into modules so that the pack can be built, tested and cooled in sensible sections. The pack adds:

    • a battery management system that checks cell voltages and temperatures and balances the cells
    • cooling or heating channels
    • fuses and contactors (heavy-duty switches) that isolate the high voltage
    • a strong sealed case, usually under the floor, which also keeps the car's center of gravity low
  6. Comparing battery types

    The AFDC compares the main battery types:

    • Lithium-ion: high energy per unit mass and volume, long life, low self-discharge, good high-temperature performance – used in most electric cars and plug-in hybrids
    • Nickel-metal hydride: reasonable energy and power and a much longer life than lead-acid – widely used in hybrids
    • Lead-acid: cheap and recyclable but heavy for the energy it stores, with poor cold performance – used for low-voltage jobs

    The AFDC also notes that studies suggest an electric car battery could keep at least 70% of its original capacity at the end of its life in the car, and could work for 10 or more years.

  7. Safety and second life

    A traction battery cannot be switched off like a light: its cells always hold their stored energy. Safety guidance lists shock, fire or explosion from stored energy, and gases or liquids from damaged batteries among the hazards. Only trained technicians handle packs, using special lifting equipment.

    At the end of its life in a car, a pack may be reused for storing energy in buildings, and the AFDC notes that most lithium-ion components can be recycled.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Electric and hybrid vehicles lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.