▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Battery electric vehicles: the main components – Vehicles and Technology motor mechanics lesson

Lesson 1 of 50 in the Vehicles and Technology course (ages 14+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Follow the energy through a battery electric car – from the charge port to the battery, the power electronics, the motor and the wheels – and find out what each main component does.

Time
40 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

This lesson is about how the parts fit together, not about working on a car. If you look at an electric car together, keep it parked and switched off and stay outside it; high-voltage parts are for trained technicians only. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “An electric car has far fewer moving parts than a gasoline car. What jobs in a workshop might become less common, and which new skills might technicians need?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking an electric car has no 12-volt battery because it has a big battery. It has both. The small auxiliary battery runs the accessories and wakes the car; the traction battery drives it.
  • Thinking the charger is the box on the wall. The wall unit mainly supplies AC safely. For AC charging the real conversion to DC happens in the onboard charger inside the car.
  • Thinking an electric car has no transmission at all. Most have a single-speed reduction gear. It has no gear changes, but it still transmits the motor's power to the wheels.

Hands-on: On a large sheet of paper, draw the outline of a car from above. Cut out card shapes for the charge port, onboard charger, traction battery, power electronics controller, motor, DC/DC converter and 12-volt battery, and arrange them where you think they sit. Draw arrows for the flow of energy, using a thick orange pen for the links that carry the traction battery's energy and a thin black pen for the 12-volt links. If you look at a real electric car, do it with a qualified adult, with the car parked and switched off, and look only from outside – never lift any lid or cover.

What you will learn

  • I can name the main components of a battery electric vehicle.
  • I can explain what the traction battery, onboard charger, power electronics controller and traction motor each do.
  • I can explain why an electric car still has a small 12-volt battery and a DC/DC converter.
  • I can list the parts a gasoline car has that a battery electric car does not.
  • I can explain why high-voltage parts are for trained technicians only.

Key words

battery electric vehicle (BEV)
A vehicle driven only by an electric motor, using energy stored in a large battery that is charged by plugging in.
traction battery pack
The large high-voltage battery that stores the energy used to drive the car.
onboard charger
The part inside the car that turns AC electricity from the mains into DC to charge the traction battery.
power electronics controller
The unit that controls how much electrical energy flows from the battery to the motor, setting the motor's speed and torque.
DC/DC converter
A unit that turns the battery's high-voltage DC into low-voltage DC for the lights, screens and the 12-volt battery.
auxiliary battery
A small low-voltage battery (typically 12 volts) that powers the car's accessories and wakes up the high-voltage system.

The big ideas

A battery electric vehicle (BEV) has no engine, no fuel tank, no fuel pump and no exhaust pipe. The US Department of Energy's Alternative Fuels Data Center (AFDC) describes it simply: an electric motor instead of an engine, a large traction battery pack, and the need to plug in to charge.

The main components form a chain. Electricity comes in through the charge port. The onboard charger converts it and fills the traction battery. When the driver presses the accelerator, the power electronics controller sends a controlled flow of energy to the electric traction motor, and a simple transmission passes the motor's turning force to the wheels. A thermal system keeps the battery, motor and electronics at a comfortable working temperature.

Alongside this high-voltage chain is a familiar low-voltage system. A DC/DC converter steps the high voltage down to charge a small auxiliary battery, which runs the lights, wipers, screens and control units.

This is explanation for understanding, not a repair guide. The high-voltage parts of an electric car can store dangerous amounts of energy, so they are for trained technicians only.

Read-through: the teaching steps

  1. The big picture

    Look at the drawing on the lesson page. A battery electric car has four big blocks: the traction battery (usually a flat pack under the floor), the power electronics, the electric motor (front, rear or both) and the charge port.

    There is no engine bay full of moving parts, no fuel system and no exhaust. That means fewer fluids and fewer parts that wear, but a lot of electrical energy stored in one place.

    Traction battery pack (under the floor)Electric traction motorPower electronicsCharge port
    The main parts of a battery electric car. High-voltage parts (usually with orange cables) are for trained technicians only.
  2. Charge port and onboard charger

    The charge port is the socket where the charging cable plugs in. Home and most public chargers supply alternating current (AC), but a battery can only store direct current (DC).

    The onboard charger does the conversion. The AFDC notes it also monitors the battery's voltage, current, temperature and state of charge while charging. Fast public chargers do this conversion outside the car and send DC straight to the battery.

  3. The traction battery pack

    The traction battery pack stores the energy that drives the car. It is made of many small cells joined together and works at several hundred volts.

    Its size, measured in kilowatt-hours (kWh), sets how far the car can go between charges, much as a fuel tank does in a gasoline car.

  4. Power electronics and the motor

    The power electronics controller sits between the battery and the motor. When the driver presses the accelerator harder, it lets more energy flow, so the motor gives more torque and the car speeds up. It controls the motor's speed and torque.

    The electric traction motor turns electrical energy into turning motion. When the car slows down, the same motor can work as a dynamo, turning motion back into electricity to top up the battery. This is called regenerative braking.

  5. Transmission and thermal system

    Electric motors work well over a very wide range of speeds, so most electric cars use a simple single-speed reduction gear rather than a multi-gear transmission. It still counts as a transmission: it passes the motor's power to the wheels.

    The thermal system pumps coolant and moves heat to keep the battery, motor and electronics in their best temperature range. Batteries charge and last best when they are neither too hot nor too cold.

  6. The low-voltage side

    An electric car still has a small auxiliary battery, typically 12 volts. It powers the lights, wipers, radio, screens and computers, and it wakes the car up before the high-voltage system switches on.

    Instead of an alternator, a DC/DC converter keeps this small battery charged by stepping the traction battery's high voltage down to low voltage.

  7. Safety first: look, never touch

    High-voltage parts are for trained technicians only. Safety guidance notes that electric and hybrid vehicles use several hundred volts DC and that high-voltage cables are usually orange. Look, never touch.

    In a shop, only a technician with vehicle-specific high-voltage training works on these systems, with the right protective equipment. Learners study the layout from drawings, never by opening covers.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Electric and hybrid vehicles lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.