Electric vehicle technician – Vehicles and Technology motor mechanics lesson
Lesson 41 of 50 in the Vehicles and Technology course (ages 14+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Find out what makes electric vehicle work different from ordinary car repair, why high voltage needs special training, and how technicians build up the competence to work on it.
- Time
- 35 minutes + 10 min homework
- Course
- Vehicles and Technology (ages 14+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
How to use this lesson
High voltage is the one area where 'look, never touch' is absolute. Make sure you can explain why residual voltage makes a switched-off EV still dangerous. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Electric vehicles need fewer parts like spark plugs and exhaust systems. How might that change the work of garages over the next 20 years?”
- Later: the homework, then the practice test.
Watch out for
- Thinking an electric car is safe to touch inside once it is switched off. Voltage can remain stored in parts of the system after switch-off. High-voltage parts are for trained technicians only.
- Thinking EV technicians only work on batteries. Most of the work is the same as on any car: tires, brakes, suspension, steering, lights and diagnosis.
- Thinking you can learn high-voltage work from videos. It needs formal training, the highest competence and vehicle-specific instruction – never something to try.
Hands-on: Draw an electric car from above on paper and label the traction pack, motor, power electronics controller, onboard charger and charge port. Color the thick cables between them orange, the warning color. Then, with an adult, look at an electric or hybrid car parked at a showroom or charging point, without touching it, and spot the charge port.
What you will learn
- I can describe the main high-voltage parts of an electric vehicle.
- I can explain why high-voltage systems are dangerous and for trained technicians only.
- I can describe how training and competence are built up in stages.
- I can explain why electric vehicle skills are a growing career area.
Key words
- high voltage (HV)
- Voltages high enough to kill. Electric and hybrid vehicles use traction systems of several hundred volts DC.
- traction battery
- The large battery pack that powers the motor of an electric vehicle.
- power electronics controller
- The unit that controls how much energy flows from the battery to the motor, and so the motor's speed and torque.
- competence
- Having the training, knowledge and experience to do a task safely.
- residual voltage
- Electrical energy that can remain stored in parts of a system even after it is switched off.
The big ideas
An electric vehicle technician works on battery electric and hybrid vehicles. Much of the job is the same as on any car – brakes, tires, suspension, steering, heating – but the high-voltage system needs extra knowledge and very careful working. These vehicles use traction systems of several hundred volts DC – enough to kill – and high-voltage cables are usually colored orange.
Technicians usually start as general automotive technicians and then specialize. ASE offers an advanced test, L3 Light Duty Hybrid/Electric Vehicle Specialist, for technicians who want to show expertise in this area. Manufacturers also provide vehicle-specific training, because every high-voltage system is a little different.
The Bureau of Labor Statistics projects 5% growth in automotive technician jobs from 2025 to 2035. Classfern explains how these systems work for understanding only. High voltage is for trained technicians only: learners look, never touch.
Read-through: the teaching steps
Inside an electric vehicle
The US Department of Energy lists the main parts of an all-electric car:
- traction battery pack – stores the energy
- power electronics controller – controls the motor's speed and torque
- electric traction motor – drives the wheels
- onboard charger – converts AC from the charge port to DC for the battery
- DC/DC converter – steps high voltage down for the 12-volt system
- auxiliary battery – runs lights and electronics
- thermal system – keeps everything at the right temperature
The drawing on the lesson page shows the layout.
The main parts of a battery electric car. High-voltage parts (usually with orange cables) are for trained technicians only. Why high voltage is so dangerous
The hazards of electric and hybrid vehicles include:
- electric shock from live high-voltage parts, which can kill
- fire or explosion from the energy stored in the battery
- voltage remaining in parts of the system after it is switched off
- very heavy battery packs
- gases and liquids from damaged batteries
- vehicles that are silent when 'on'
That is why only trained technicians with vehicle-specific training work on high-voltage systems.
Levels of competence
Competence is built in stages:
- awareness – knowing which parts are high voltage and staying clear
- general service work on electric vehicles that does not involve the high-voltage system
- work on the high-voltage system itself – only with advanced and vehicle-specific training
ASE's L3 test is one way experienced technicians show this specialist knowledge.
How trained technicians stay safe
In shops, trained technicians follow the manufacturer's high-voltage safety procedure before any work on the system, using insulated equipment and protective gear. OSHA requires employers to assess hazards and provide suitable protective equipment and training. None of this is something a learner ever does – learners look, never touch.
The rest of the job
Electric vehicles still need ordinary work: tires wear (often faster, because the cars are heavy), brakes need checking (though regenerative braking means they are used less), and suspension, steering, wipers, lights and the 12-volt system all need servicing. Diagnosis uses scan tools and the manufacturer's data – a large part of an EV technician's day is at a computer.
A growing career
As more electric and hybrid vehicles come onto the road, shops need technicians with the right skills. Most EV technicians start as general automotive technicians, earn ASE certifications, and then add advanced tests such as L3 and manufacturer training.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Graded by Classfern |
| Independent practice (three levels) | 8 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Careers and qualifications lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- US Department of Energy, Alternative Fuels Data Center – How do all-electric cars work?
- ASE – Test series
- US Bureau of Labor Statistics – Occupational Outlook Handbook: automotive service technicians and mechanics
- OSHA – 29 CFR 1910.132, personal protective equipment: general requirements
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.