▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Electric vehicle technician – Vehicles and Technology motor mechanics lesson

Lesson 41 of 50 in the Vehicles and Technology course (ages 14+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out what makes electric vehicle work different from ordinary car repair, why high voltage needs special training, and how technicians build up the competence to work on it.

Time
35 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

High voltage is the one area where 'look, never touch' is absolute. Make sure you can explain why residual voltage makes a switched-off EV still dangerous. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Electric vehicles need fewer parts like spark plugs and exhaust systems. How might that change the work of garages over the next 20 years?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking an electric car is safe to touch inside once it is switched off. Voltage can remain stored in parts of the system after switch-off. High-voltage parts are for trained technicians only.
  • Thinking EV technicians only work on batteries. Most of the work is the same as on any car: tyres, brakes, suspension, steering, lights and diagnosis.
  • Thinking you can learn high-voltage work from videos. It needs formal training, the highest competence and vehicle-specific instruction – never something to try.

Hands-on: Draw an electric car from above on paper and label the traction pack, motor, power electronics controller, onboard charger and charge port. Colour the thick cables between them orange, the warning colour. Then, with an adult, look at an electric or hybrid car parked at a showroom or charging point, without touching it, and spot the charge port.

What you will learn

  • I can describe the main high-voltage parts of an electric vehicle.
  • I can explain why high-voltage systems are dangerous and for trained technicians only.
  • I can describe how training and competence are built up in stages.
  • I can explain why electric vehicle skills are a growing career area.

Key words

high voltage (HV)
In this sector, HSE counts 60–1,500 V DC as high voltage. Electric and hybrid vehicles currently use up to about 650 V DC.
traction battery
The large battery pack that powers the motor of an electric vehicle.
power electronics controller
The unit that controls how much energy flows from the battery to the motor, and so the motor's speed and torque.
competence
Having the training, knowledge and experience to do a task safely.
residual voltage
Electrical energy that can remain stored in parts of a system even after it is switched off.

The big ideas

An electric vehicle technician works on battery electric and hybrid vehicles. Much of the job is the same as on any car – brakes, tyres, suspension, steering, heating – but the high-voltage system needs extra knowledge and very careful working. HSE says electric and hybrid vehicles currently use voltages up to 650 V DC, and that contact with live parts above 110 V DC can be fatal, even in dry conditions. High-voltage cables are usually coloured orange.

HSE describes four kinds of work, each needing more competence than the last: valeting and sales (awareness); incident response and recovery; maintenance and repair that does not involve the high-voltage system (which needs much greater competence); and work on the high-voltage system itself, which needs the highest competence and vehicle-specific training. IMI awards are an example of the training used.

The National Careers Service lists hybrid and electric vehicle courses among the college routes into motor vehicle work. Classfern explains how these systems work for understanding only. High voltage is for trained technicians only: learners look, never touch.

Read-through: the teaching steps

  1. Inside an electric vehicle

    The US Department of Energy lists the main parts of an all-electric car:

    • traction battery pack – stores the energy
    • power electronics controller – controls the motor's speed and torque
    • electric traction motor – drives the wheels
    • onboard charger – converts AC from the charge port to DC for the battery
    • DC/DC converter – steps high voltage down for the 12-volt system
    • auxiliary battery – runs lights and electronics
    • thermal system – keeps everything at the right temperature

    The drawing on the lesson page shows the layout.

    Traction battery pack (under the floor)Electric traction motorPower electronicsCharge port
    The main parts of a battery electric car. High-voltage parts (usually with orange cables) are for trained technicians only.
  2. Why high voltage is so dangerous

    HSE lists the hazards of electric and hybrid vehicles:

    • electric shock from live parts – above 110 V DC can be fatal
    • fire or explosion from the energy stored in the battery
    • residual voltage remaining after the system is switched off
    • unexpected movement from motor magnets
    • heavy batteries (manual handling)
    • gases and liquids from damaged batteries
    • vehicles that are silent when 'on'
    • effects on heart pacemakers
  3. Levels of competence

    HSE's four categories of work:

    1. Valeting, sales and other low-risk work – awareness of the hazards 2. Incident response and recovery – for example roadside recovery 3. Maintenance and repair not involving the high-voltage system – much greater competence 4. Work on the high-voltage system – the highest competence and vehicle-specific training

    Each step needs more training. IMI awards are an example of how technicians gain these competences.

  4. How trained technicians stay safe

    HSE describes the precautions used in workshops. Before any high-voltage work, a trained technician isolates the system, locks it off and proves it is dead, following the manufacturer's procedure. Remote keys are kept away from the vehicle, care is taken with pressure washing, and damaged vehicles are towed only when confirmed safe, because turning wheels can make dangerous voltage. Live working is a last resort. None of this is something a learner ever does.

  5. The rest of the job

    Electric vehicles still need ordinary work: tyres wear (often faster, because the cars are heavy), brakes need checking (though regenerative braking means they are used less), and suspension, steering, wipers, lights and the 12-volt system all need servicing. Diagnosis uses scan tools and the manufacturer's data – a large part of an EV technician's day is at a computer.

  6. A growing career

    As more electric and hybrid vehicles come onto the road, garages need technicians with the right competence. The National Careers Service lists hybrid and electric vehicle courses as one college route. Most EV technicians start as general light vehicle technicians, then add specialist qualifications.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minMarked by Classfern
Independent practice (three levels)8 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Careers and qualifications lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.