Career and technical education and ASE entry-level tests – Vehicles and Technology motor mechanics lesson
Lesson 39 of 50 in the Vehicles and Technology course (ages 14+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
See how high school career and technical education (CTE) and the ASE Education Foundation's entry-level tests help students start on the road to automotive work.
- Time
- 35 minutes + 10 min homework
- Course
- Vehicles and Technology (ages 14+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
How to use this lesson
Entry requirements and program names change. Check the ASE Education Foundation and your school for the current details. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why might a test that covers nine areas be more useful to an employer than nine separate small tests?”
- Later: the homework, then the practice test.
Watch out for
- Thinking an entry-level test is the same as ASE certification. Professional certification needs a passed ASE test and work experience.
- Thinking CTE is only for students who will not go to college. CTE can lead to community college, vocational school, a four-year degree or straight to work.
- Thinking you need to answer every question right to pass. MLR needs 31 of 60; AST needs 45 of 80.
Hands-on: Make a two-column table on paper: 'MLR' and 'AST'. Add rows for number of questions, passing score, pass percentage and who it suits. Then list the nine content areas and tick the ones you have learned about in Classfern lessons.
What you will learn
- I can explain what career and technical education (CTE) is.
- I can describe the two ASE entry-level tests and how they are scored.
- I can list the content areas the entry-level tests cover.
- I can explain how entry-level tests lead on to ASE certification.
Key words
- career and technical education (CTE)
- High school and college classes that teach the knowledge and skills for a career area, such as automotive technology.
- ASE Education Foundation
- The organization that sets standards for automotive training programs and offers student entry-level tests.
- MLR
- Maintenance and Light Repair – one of the two student entry-level tests.
- AST
- Automobile Service Technology – the larger of the two student entry-level tests.
- passing score
- The number of correct answers needed to pass a test.
The big ideas
Many US students first meet automotive technology through career and technical education (CTE): high school classes, often with a school shop, that teach the theory and basic skills of a career area. CTE can continue at a community college or vocational school. The Bureau of Labor Statistics says the typical entry-level education for automotive service technicians is a postsecondary nondegree award – a certificate from a program after high school.
The ASE Education Foundation offers entry-level tests for students. Its 2022 specifications describe two: Maintenance and Light Repair (MLR), with 60 questions and 31 needed to pass, and Automobile Service Technology (AST), with 80 questions and 45 needed to pass. They cover Engine Repair; Automatic Transmission and Transaxle; Manual Drive Train and Axles; Suspension and Steering; Brakes; Electrical/Electronic Systems; Heating, Ventilation and Air Conditioning; Engine Performance; and Foundational Tasks.
Entry-level tests are not ASE certification. They show what a student knows; full ASE certification comes later, after passing the professional tests and gaining work experience.
Read-through: the teaching steps
What CTE is
CTE programs teach the knowledge and skills for a career area. An automotive CTE class might cover shop safety, how engines and brakes work, electrical basics and customer service. Students practice in a supervised school shop, and some programs include work-based learning with local employers.
From high school to postsecondary
After high school, students can continue at a community college or vocational school, earning a certificate – the postsecondary nondegree award that BLS gives as the typical entry education. Some start work straight from high school as trainees and learn on the job.
The entry-level tests
The ASE Education Foundation's 2022 specifications:
- Maintenance and Light Repair (MLR) – 60 questions, 31 to pass
- Automobile Service Technology (AST) – 80 questions, 45 to pass
MLR suits students who have covered the core maintenance and light repair tasks; AST is the larger test covering the full service technology program.
What they cover
Both tests cover nine content areas:
- Engine Repair
- Automatic Transmission and Transaxle
- Manual Drive Train and Axles
- Suspension and Steering
- Brakes
- Electrical/Electronic Systems
- Heating, Ventilation and Air Conditioning
- Engine Performance
- Foundational Tasks
The next step: certification
Passing an entry-level test is not ASE certification. Professional ASE certification needs a passed ASE test plus work experience (or training plus experience), and lasts five years. The entry-level tests are a stepping stone that shows employers what a student already knows.
Safety in training
Whichever route you choose, you only work on vehicles under the supervision of qualified staff, with protective equipment, after safety training. OSHA says employers must provide training workers can understand. As a Classfern learner you only ever look, with a qualified adult.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Graded by Classfern |
| Independent practice (three levels) | 8 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Careers and qualifications lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- ASE Education Foundation – Entry-level automobile test specifications
- US Bureau of Labor Statistics – Occupational Outlook Handbook: automotive service technicians and mechanics
- ASE – Certification tests and requirements
- OSHA – Help for employers
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.