▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Apprenticeships and college routes – Vehicles and Technology motor mechanics lesson

Lesson 39 of 50 in the Vehicles and Technology course (ages 14+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Compare the two main ways into motor vehicle work in the UK – a college course or an apprenticeship – and see what each asks of you and gives you.

Time
35 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

Entry requirements and course names change. Check the National Careers Service and your local college for the current details. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Would you rather earn while you learn, or learn first and earn later? Why?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking an apprentice is a student who is not paid. An apprentice is an employee who earns a wage while training.
  • Thinking college is a dead end without an apprenticeship. College qualifications can lead straight to jobs, or on to an apprenticeship or a higher level course.
  • Thinking you cannot start without top GCSE grades. Level 1 and level 2 courses are designed as first steps.

Hands-on: Make a two-column table on paper: 'College' and 'Apprenticeship'. Add rows for pay, where you learn, how long it takes, entry requirements and what you finish with. Fill it in from this lesson, then circle the row that matters most to you. Ask an adult to help you look up your nearest college's motor vehicle courses.

What you will learn

  • I can explain the difference between a college course and an apprenticeship.
  • I can describe the usual entry requirements for each route.
  • I can compare apprenticeship levels: intermediate, advanced, higher and degree.
  • I can weigh up which route might suit different people.

Key words

apprenticeship
A real, paid job with training, mixing work with study at a college or training provider.
college course
Full-time or part-time study at a further education college, with workshop practice.
T Level
A two-year technical qualification for 16–19 year olds, roughly equivalent to three A levels, including an industry placement.
advanced apprenticeship
An apprenticeship at level 3.
entry requirements
What you need before you can start, such as certain GCSE grades.

The big ideas

There are two main ways into motor vehicle work in the UK. The first is a college course: you study at a further education college, with classroom theory and practical work in the college workshop, and gain a qualification such as a light vehicle maintenance and repair diploma or a T Level. The second is an apprenticeship: you are employed by a garage or dealership, earn a wage, and train both at work and with a college or training provider.

The National Careers Service says the Level 3 Advanced Apprenticeship as a Motor Vehicle Service and Maintenance Technician (Light Vehicle) usually takes 2 to 3 years, and employers usually ask for 4 or 5 GCSEs at grades 9 to 4, including English and maths. College entry requirements vary by course; for a T Level, the National Careers Service gives 4 or 5 GCSEs at grades 9 to 4, including English and maths.

Neither route is 'better'. A college course gives time to learn in a safe workshop before working; an apprenticeship gives pay and real experience from the start. Many people do a college course first and then move into an apprenticeship. Higher and degree apprenticeships, for roles such as motorsport engineering, usually ask for A levels as well.

Read-through: the teaching steps

  1. Route 1: college

    At college you study theory in classrooms and practise in a supervised college workshop. Courses include light vehicle maintenance and repair diplomas at levels 1, 2 and 3, and T Levels.

    • Good if you want to learn before working
    • Practice happens on college vehicles under supervision
    • You may need a part-time job or work placement to gain real experience
  2. Route 2: apprenticeship

    An apprentice is an employee. You:

    • earn a wage
    • work alongside experienced technicians
    • spend part of your time training with a college or provider
    • finish with a qualification and real experience

    The light vehicle Level 3 Advanced Apprenticeship usually takes 2 to 3 years.

  3. Apprenticeship levels

    • Intermediate – level 2
    • Advanced – level 3
    • Higher – levels 4 and 5
    • Degree – levels 6 and 7

    The National Careers Service says a motorsport engineering advanced apprenticeship usually needs 5 GCSEs at grades 9 to 4 including English and maths, while higher or degree apprenticeships need 4 or 5 GCSEs plus A levels.

  4. Entry requirements

    Requirements vary by college and employer. Typical examples from the National Careers Service:

    • T Level: 4 or 5 GCSEs at grades 9 to 4, including English and maths
    • Level 3 light vehicle apprenticeship: usually 4 or 5 GCSEs at grades 9 to 4, including English and maths

    If you do not have these yet, a level 1 or level 2 college course can be a first step.

  5. Choosing a route

    Questions to ask yourself:

    • Do I want to earn while I learn?
    • Would I like time to practise before working on customers' cars?
    • Is there an employer near me offering apprenticeships?
    • Which qualification will I finish with?

    Many technicians use both routes: college first, then an apprenticeship.

  6. Safety in training

    Whichever route you choose, you only work on vehicles under the supervision of qualified staff, with protective equipment, after safety training. HSE warns that most deaths in vehicle repair come from people trapped under badly supported vehicles. As a Classfern learner you only ever look, with a qualified adult.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minMarked by Classfern
Independent practice (three levels)8 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Careers and qualifications lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.