Torque, power and the engine's performance curves – Motor Vehicle Theory motor mechanics lesson
Lesson 28 of 131 in the Motor Vehicle Theory course (ages 16+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Understand the difference between torque and power, calculate one from the other, and read an engine's performance curves.
- Time
- 45 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.
How to use this lesson
This lesson explains torque and power with example data for practice. The activity is graph plotting. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If two cars have the same power, why might one feel faster in everyday driving?”
- Later: the homework, then the practice test.
Watch out for
- Thinking torque and power are the same thing. Power = torque × speed. The same power can come from high torque at low rpm or lower torque at high rpm.
- Thinking peak torque and peak power occur together. In most engines peak power comes at higher rpm than peak torque.
- Forgetting to convert kW to W, or rpm to rad/s. Use P (W) = 2π × N × T ÷ 60, or the 9,549 shortcut for kW.
Hands-on: Plot an engine's curves on graph paper from this example data: rpm 1,000/2,000/3,000/4,000/5,000/6,000; torque 140/180/200/195/180/150 N·m. Calculate power at each point using P (kW) = T × rpm ÷ 9,549 and plot it on the same graph with a second axis. Mark peak torque and peak power.
What you will learn
- I can explain the difference between torque and power.
- I can calculate power from torque and engine speed, and the reverse.
- I can convert between kW and horsepower.
- I can read and interpret torque and power curves.
- I can compare an engine's curves with an electric motor's.
Key words
- torque
- Turning effect at the crankshaft, in N·m.
- power
- Rate of doing work: torque × rotational speed, in kW or hp.
- rpm
- Revolutions per minute: engine speed.
- performance curves
- Graphs of torque and power against engine speed.
- dynamometer
- A machine that loads an engine or vehicle to measure torque and power.
The big ideas
Car brochures quote two figures: torque and power. Torque is the twisting force at the crankshaft – what you feel as pulling. Power is how fast the engine can do work: torque multiplied by how fast it is turning. A slow-turning engine with lots of torque and a fast-revving engine with less torque can make the same power.
The link is P = 2π × N × T ÷ 60, with P in watts, N in rpm and T in N·m. Plotting torque and power against rpm gives the performance curves, which show where an engine works best. The US Department of Energy notes that a gasoline car's transmission transfers mechanical power to the wheels – gears let the engine stay where its curves are strongest.
This lesson explains the ideas and the calculations, with example figures for practice.
Read-through: the teaching steps
Torque and power
- Torque – turning force at the crankshaft (N·m).
- Power – rate of doing work (W or kW). 1 hp ≈ 0.746 kW.
Power = torque × angular speed. With engine speed in rpm:
P (W) = 2π × N × T ÷ 60, or P (kW) = T × N ÷ 9,549.
Reading performance curves
A typical gasoline engine's torque rises from idle to a peak in the mid-range and then falls. Power keeps rising with rpm until the fall in torque outweighs the rise in speed, so peak power comes at a higher rpm than peak torque. The rev limit is usually a little above the power peak.
Why the curves have their shape
At low rpm, air flow and the tuning of the inlet and exhaust limit filling. In the mid-range the cylinders fill best (high volumetric efficiency), giving peak torque. At high rpm there is less time to fill the cylinders and friction grows, so torque drops. Variable valve timing and turbocharging can flatten the torque curve.
Gears and the curves
The transmission lets the engine run at useful speeds whatever the road speed. For economy a driver uses low revs near the torque peak; for fastest acceleration a driver keeps revs near the power peak. See how power flows to the wheels in the drawing on the lesson page.
How the turning force gets from the engine to the driven wheels (rear-wheel drive shown). Electric motors compared
An electric motor gives its maximum torque from standstill and holds it over a wide speed range, then power levels off. That is why electric cars pull away so strongly and need only one gear.
Measuring torque and power
A dynamometer loads the engine (on a test bed) or the driven wheels (on a rolling road) and measures torque and speed; power is calculated. Wheel figures are lower than engine figures because of drivetrain losses.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Engines lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.