▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Spark plugs and glow plugs – Motor Vehicle Theory motor mechanics lesson

Lesson 127 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out why gasoline engines need spark plugs and diesel engines use glow plugs, how plugs wear, and what a misfire can do to the exhaust system.

Time
35 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

The activity uses a bicycle pump only. This lesson explains ignition; plug replacement is for trained technicians. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think diesel engines can manage without a spark, but gasoline engines cannot?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking diesel engines have spark plugs. Diesels are compression-ignited; glow plugs only help cold starting.
  • Thinking a glow plug makes a spark. It is a heater; the fuel still ignites from the heat of compression.
  • Thinking a misfire only makes the engine rough. Unburnt fuel can overheat and damage the catalytic converter.

Hands-on: Squeeze test: hold your finger over the end of a bicycle pump and push the handle down quickly several times – feel the end get warm. This is the idea behind compression ignition. Then draw and label a spark plug and a glow plug side by side.

What you will learn

  • I can explain the difference between spark ignition and compression ignition.
  • I can describe how a spark plug works and how its gap and electrodes wear.
  • I can explain what a glow plug does in a diesel engine.
  • I can explain why a misfire matters for the catalytic converter.

Key words

spark plug
A part screwed into the cylinder head of a gasoline engine that makes a spark to ignite the air–fuel mixture.
spark gap
The small gap between the plug's center and side electrodes that the spark jumps across.
glow plug
An electric heater in a diesel engine's combustion chamber (or pre-chamber) that helps the engine start when cold.
misfire
A cylinder failing to burn its mixture properly on a power stroke.

The big ideas

Gasoline and diesel engines ignite their fuel in different ways. The US Department of Energy describes a gasoline car's engine as spark-ignited: fuel is mixed with air and ignited by the spark plug. A diesel is compression-ignited: fuel is injected into air that has been squeezed by the piston until it is hot enough to ignite the fuel on its own. So gasoline engines need spark plugs, and diesels do not.

A spark plug has a center electrode and an side electrode with a small gap between them. The ignition system sends a very high-voltage pulse to the plug at exactly the right moment, and the spark jumps the gap. Every spark erodes the electrodes slightly, so over many miles the gap widens and the spark needs more voltage to jump. Eventually the plug may misfire. Plugs are replaced at the interval in the manufacturer's schedule.

Diesels have glow plugs instead. When the engine is cold, the compressed air may not get hot enough to light the fuel reliably, so glow plugs heat the combustion chamber before and during starting. A failed glow plug shows up as hard cold starting and smoke. Neither kind of plug is a job for a learner: the ignition system's voltage can give a dangerous shock, and the work is done by trained technicians.

Read-through: the teaching steps

  1. Two ways to ignite

    • Spark ignition (gasoline): mixture ignited by the spark plug.
    • Compression ignition (diesel): air compressed until hot; fuel injected and ignites by itself.

    The four-stroke drawing on the lesson page shows where ignition happens – near the top of the compression stroke.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. Inside a spark plug

    • Terminal at the top receives the high-voltage pulse.
    • Ceramic insulator keeps the voltage from leaking to the engine.
    • Center electrode and side electrode, separated by the gap.
    • Thread and seat seal the plug into the cylinder head.
  3. How plugs wear

    Each spark removes a tiny amount of electrode metal. Over thousands of sparks the gap widens. A wider gap needs more voltage; when the system can no longer supply enough, the plug misfires. Deposits from oil or rich running can also foul a plug. Many modern plugs use hard-wearing electrode tips that last much longer.

  4. Why misfires matter

    Unburnt fuel from a misfiring cylinder goes into the exhaust, where it can overheat the catalytic converter. California's Air Resources Board explains that a blinking check engine light means a malfunction is happening that could damage the catalytic converter, so it needs service as soon as possible.

  5. Glow plugs

    Glow plugs are small electric heaters. Before a cold start the dashboard glow-plug lamp shows they are heating; once it goes out the engine is ready to start. Many modern diesels also keep them on briefly after starting to reduce smoke and noise. A failed glow plug means hard cold starting, rough running and smoke when cold.

  6. Theory only

    This lesson explains how plugs work. Ignition systems produce a voltage that can give a dangerous shock, and plug replacement is done by trained technicians following the manufacturer's procedure and torque data.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minGraded by Classfern
Independent practice (three levels)8 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Servicing and maintenance lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.