Recording work: job cards and reporting – Motor Vehicle Theory motor mechanics lesson
Lesson 115 of 131 in the Motor Vehicle Theory course (ages 16+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Find out what goes on a repair order, why every job is recorded clearly – the concern, the cause and the correction (the three Cs) – and how good records protect the customer, the technician and the business.
- Time
- 35 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.
How to use this lesson
This lesson covers recording and customer communication, with money and percentage calculations. It involves no practical work on a vehicle. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “A customer says the car was fine before the shop worked on it and now has a new fault. How could good records help everyone work out what happened fairly?”
- Later: the homework, then the practice test.
Watch out for
- Writing vague notes such as "checked car" or "fixed noise". Write the complaint, the cause found and the correction in specific words that anyone could understand later.
- Doing extra work without asking the customer. Extra work needs the customer's authorization, recorded with the time and name, before it is done.
- Thinking advisories are not important because the car still passes. Advisories warn of things that could become faults. Recording them and telling the customer helps prevent breakdowns and accidents.
Hands-on: Design your own repair order on paper or a computer. Include boxes for customer and vehicle details, the complaint, authorization, cause, correction, parts, labor time and advisories. Then fill it in for a made-up job: "Squeak from rear when going over bumps." Invent sensible findings, and work out the labor charge for 0.8 hours at $65 per hour. No vehicle needed.
What you will learn
- I can list the information recorded on a repair order and explain why each part matters.
- I can write a clear complaint, cause and correction for a job.
- I can explain how advisories and safety-critical defects are reported to the customer.
- I can calculate labor, parts and job totals and a technician's efficiency.
Key words
- repair order
- The record of a job in the shop: what the customer asked for, what was found, what was done, the parts and time used, and who did it.
- the three Cs
- Concern, cause and correction: what the customer reported, what the technician found to be the cause, and what was done to correct it.
- advisory
- A note to the customer about something that is not yet a fault but should be watched or attended to soon, such as tires nearing their limit.
- authorization
- The customer's agreement, recorded before extra work is done or extra cost is added.
- VIN
- Vehicle identification number: the unique 17-character number that identifies a vehicle.
The big ideas
The job is not finished when the last bolt is tightened. It is finished when it has been recorded. A clear repair order tells the customer what was wrong and what was done, tells the next technician the vehicle's history, and tells the business what to charge and what parts were used.
Records also matter for safety. If a technician spots worn brakes or a damaged tire while doing another job, recording it and telling the customer is part of their duty of care. State safety inspections work in a similar way: in Virginia, for example, a rejected vehicle must have its defects corrected and be reinspected within 15 days, so the inspector records exactly what failed.
Most shops now record this on computer systems. This lesson is about recording and communicating; it involves no work on a vehicle.
Read-through: the teaching steps
What goes on a repair order
A typical repair order records:
- customer name and contact details (kept private and used only for the job);
- vehicle registration or VIN, make, model and mileage;
- the customer's complaint, in clear words;
- the customer's authorization for diagnosis and a cost limit;
- the cause found and the correction made;
- parts used, with part numbers and quantities;
- labor time and the technician's name;
- advisories and safety notes;
- the date, and a note that the work was checked.
Many shops keep these as electronic records linked to the vehicle's history.
Complaint, cause, correction
The heart of every repair order is the three Cs:
- Concern – what the customer reported: "Squeal from front when braking, worse in the mornings."
- Cause – what the technician found: "Front pads worn to wear indicator; rotors within limits."
- Correction – what was done: "Front pads replaced to manufacturer's specification; road tested, noise gone."
Each should be specific enough that someone else could understand the job without asking.
Authorization and communication
Before any work beyond what was agreed, the customer must be contacted and give authorization, which is recorded on the repair order with the time and the name of the person who agreed. This avoids disputes and builds trust.
The explanation to the customer should be clear and honest: what was found, how urgent it is, what it will cost, and what happens if it is left. Technical words are explained in plain language.
Advisories and safety-critical defects
Not every finding needs fixing today. Records separate:
- safety-critical defects – the vehicle should not be driven until they are repaired;
- items needing attention soon;
- advisories – things to monitor.
Writing these clearly on the repair order and explaining them to the customer is part of the technician's duty of care. Where a state safety inspection rejects a vehicle, the inspection record lists the defects that must be corrected before it passes; rules are set by each state.
Records beyond the repair order
Shops keep other records too:
- parts and stock records, so used parts are reordered;
- warranty records, with the old parts kept if the maker requires them;
- waste records – used oil and filters are recycled, and EPA notes that used oil from one oil change can contaminate a million gallons of fresh water, so its disposal is tracked;
- safety records, such as lift inspections, which follow the recognized industry standard for automotive lifts.
Good records show the business is working safely and legally.
Time, cost and efficiency
Each job has a labor time. Many shops use standard times for common jobs. The technician records the time actually taken.
- Labor charge = hours × hourly rate.
- Efficiency = time allowed ÷ time taken × 100%.
An efficiency above 100% means the job was done faster than the standard time; much lower may show a problem or a training need. Accurate times also help give customers fair estimates.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Graded by Classfern |
| Independent practice (three levels) | 8 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Fault-finding lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.