Recording work: job cards and reporting – Motor Vehicle Theory motor mechanics lesson
Lesson 115 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out what goes on a job card, why every job is recorded clearly – the complaint, the cause, the correction and any advisories – and how good records protect the customer, the technician and the business.
- Time
- 35 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
This lesson covers recording and customer communication, with money and percentage calculations. It involves no practical work on a vehicle. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “A customer says the car was fine before the workshop worked on it and now has a new fault. How could good records help everyone work out what happened fairly?”
- Later: the homework, then the practice test.
Watch out for
- Writing vague notes such as "checked car" or "fixed noise". Write the complaint, the cause found and the correction in specific words that anyone could understand later.
- Doing extra work without asking the customer. Extra work needs the customer's authorisation, recorded with the time and name, before it is done.
- Thinking advisories are not important because the car still passes. Advisories warn of things that could become faults. Recording them and telling the customer helps prevent breakdowns and accidents.
Hands-on: Design your own job card on paper or a computer. Include boxes for customer and vehicle details, the complaint, authorisation, cause, correction, parts, labour time and advisories. Then fill it in for a made-up job: "Squeak from rear when going over bumps." Invent sensible findings, and work out the labour charge for 0.8 hours at £65 per hour. No vehicle needed.
What you will learn
- I can list the information recorded on a job card and explain why each part matters.
- I can write a clear complaint, cause and correction for a job.
- I can explain how advisories and safety-critical defects are reported to the customer.
- I can calculate labour, parts and job totals and a technician's efficiency.
Key words
- job card
- The record of a job in the workshop: what the customer asked for, what was found, what was done, the parts and time used, and who did it.
- complaint, cause, correction
- The three parts of a good job record: what the customer reported, what the technician found to be the cause, and what was done to correct it.
- advisory
- A note to the customer about something that is not yet a fault but should be watched or attended to soon, such as tyres nearing their limit.
- authorisation
- The customer's agreement, recorded before extra work is done or extra cost is added.
- VIN
- Vehicle identification number: the unique 17-character number that identifies a vehicle.
The big ideas
The job is not finished when the last bolt is tightened. It is finished when it has been recorded. A clear job card tells the customer what was wrong and what was done, tells the next technician the vehicle's history, and tells the business what to charge and what parts were used.
Records also matter for safety. If a technician spots worn brakes or a damaged tyre while doing another job, recording it and telling the customer is part of their duty of care. The MOT uses a similar idea with its defect categories – dangerous, major, minor and advisory – so that the urgency is clear.
The IMI's Level 3 diploma includes ICT for Vehicle Repair among its applied units, because so much of this recording is now done on computer systems. This lesson is about recording and communicating; it involves no work on a vehicle.
Read-through: the teaching steps
What goes on a job card
A typical job card records:
- customer name and contact details (kept private and used only for the job);
- vehicle registration or VIN, make, model and mileage;
- the customer's complaint, in clear words;
- the customer's authorisation for diagnosis and a cost limit;
- the cause found and the correction made;
- parts used, with part numbers and quantities;
- labour time and the technician's name;
- advisories and safety notes;
- the date, and a note that the work was checked.
Many workshops keep these as electronic records linked to the vehicle's history.
Complaint, cause, correction
The heart of every job card is three short statements:
- Complaint – what the customer reported: "Squeal from front when braking, worse in the mornings."
- Cause – what the technician found: "Front pads worn to wear indicator; discs within limits."
- Correction – what was done: "Front pads renewed to manufacturer's specification; road tested, noise gone."
Each should be specific enough that someone else could understand the job without asking.
Authorisation and communication
Before any work beyond what was agreed, the customer must be contacted and give authorisation, which is recorded on the job card with the time and the name of the person who agreed. This avoids disputes and builds trust.
The explanation to the customer should be clear and honest: what was found, how urgent it is, what it will cost, and what happens if it is left. Technical words are explained in plain language.
Advisories and safety-critical defects
Not every finding needs fixing today. Records separate:
- safety-critical defects – the vehicle should not be driven until they are repaired;
- items needing attention soon;
- advisories – things to monitor.
The MOT uses defect categories with the same purpose: dangerous (do not drive until repaired; fail), major (repair immediately; fail), minor (repair as soon as possible; pass) and advisory (monitor; pass). Recording these clearly, and telling the customer, is part of the technician's duty of care.
Records beyond the job card
Workshops keep other records too:
- parts and stock records, so used parts are reordered;
- warranty records, with the old parts kept if the maker requires them;
- waste records – used oil, oil filters and lead-acid batteries are hazardous waste with their own codes (lead-acid batteries 16 06 01*), so their disposal is recorded;
- safety records, such as lift inspections, which HSE recommends every 6 months by a competent person.
Good records show the business is working safely and legally.
Time, cost and efficiency
Each job has a labour time. Many workshops use standard times for common jobs. The technician records the time actually taken.
- Labour charge = hours × hourly rate.
- Efficiency = time allowed ÷ time taken × 100%.
An efficiency above 100% means the job was done faster than the standard time; much lower may show a problem or a training need. Accurate times also help give customers fair estimates.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Marked by Classfern |
| Independent practice (three levels) | 8 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Fault-finding lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- Institute of the Motor Industry – Level 3 Extended Diploma in Light Vehicle Maintenance and Repair Principles
- DVSA – Overview of MOT changes from May 2018
- GOV.UK / Environment Agency – Vehicle and oily wastes: how to classify
- HSE – Working under vehicles
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.